Owner's Manual

3-30 Pre-driving checks and adjustments
SPA2447
INSIDE MIRROR
Adjust the height and the angle of the
inside mirror to the desired position.
SPA2450-A
Automatic anti-glare type
The inside mirror is designed so that it
automatically changes reflection according
to the intensity of the headlights of the
following vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is
pushed to the ON position.
When the anti-glare system is turned on,
the indicator light
*
A
will illuminate and
excessive glare from the headlights of the
vehicle behind you will be reduced.
Push the “*” switch
*
B
to make the
inside rearview mirror operate normally.
The indicator light will turn off. Push the “I”
switch
*
C
to turn the system on.
Do not allow any object to cover the
sensors
*
D
or apply glass cleaner on
them. Doing so will reduce the sensitivity
of the sensor, resulting in improper
operation.
For the HomeLink
®
Universal Transceiver
operation, see “ HomeLink
®
Universal
Transceiver” in the “2. Instruments and
controls” section.
OUTSIDE MIRRORS
WARNING
. Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.
. Do not adjust the mirrors while driving.
You could lose control of your vehicle
and cause an accident.
MIRRORS