Owner's Manual

1-14 Safety — seats, seat belts and supplemental restraint system
SSS0996
Install (front seats and 2nd row
outboard seats)
1. Align the head restraint stalks with the
holes in the seat. Make sure that the
head restraint is facing the correct
direction. The stalk with the adjustment
notches
*
1
must be installed in the
hole with the lock knob
*
2
.
2. Push and hold the lock knob and push
the head restraint down.
3. Properly adjust the head restraint
before an occupant uses the seating
position.
CAUTION
Models with a head restraint display (if so
equipped) are designed so that the head
restraint cannot be removed. The head
restraint display may be damaged if the
head restraint is forcibly pulled out.
SSS1123
Adjustment (3rd row seats)
To raise the head restraint, pull it up to the
lock position.