Owner's Manual

6-6 In case of emergency
SCE0915
5. Securely screw to connect the T-shaped
end of the jack rod and two extension
bars
*
1
as illustrated.
6. Fit the square end of the jack rod into
the square hole of the wheel nut
wrench to form a handle
*
2
.
7. Locate the oval opening above the
middle of the rear bumper.
8. Place the T-shaped end of the jack rod
through the opening and direct it
towards the spare wheel winch assem-
bly, located directly above the spare
wheel.
SCE0916
CAUTION
Do not insert the jack rod straight as it is
designed to be inserted at an angle as
shown.
9. Seat the T-shaped end of the jack rod
into the T-shaped opening of the spare
wheel winch. Apply pressure to keep
the jack rod engaged in the spare
wheel winch and turn the jack rod
counterclockwise to lower the spare
wheel.