Owner's Manual

1-30 Safety — seats, seat belts and supplemental restraint system
Attaching 3rd row center seat belt:
Always be sure the 3rd center seat belt
connector tongue and connector buckle are
attached. Disconnect only when folding
down the 3rd row seat.
To connect the buckle:
1. Pull out the connector tongue from the
retractor base
*
1
.
2. Pull out the seat belt tongue from the
tongue holder
*
B
*
2
.
3. Pull the seat belt and fasten the
connector buckle until it clicks
*
3
.
The center seat belt connector tongue and
buckle are identified by the
and
mark.
The center seat belt connector tongue can
be attached only into the 3rd center seat
belt connector buckle.
To fasten the seat belt, see “Fastening the
seat belts” earlier in this section.
WARNING
. When attaching the 3rd center seat belt
connector, be certain that the seatbacks
are completely secured in the latched
position and the 3rd center seat belt
connector is completely secured.
. If the 3rd center seat belt connector and
the seatbacks are not secured in the
correct position, serious personal injury
may result in an accident or sudden
stop.
SSS1097
Storing 3rd row seat belt buckles
Before folding down the seat, put the
buckles in the storage of the seat cushion
to avoid dropping it under the seat
cushion.