Owner's Manual

8-34 Maintenance and do-it-yourself
SDI1949
Checking the tire pressure
1.
Remove the valve stem cap from
the tire.
2.
Press the pressure gauge
squarely onto the valve stem. Do
not press too hard or force the
valve stem sideways, or air will
escape. If the hissing sound of air
escaping from the tire is heard
while checking the pressure, re-
position the gauge to eliminate
this leakage.
3.
Remove the gauge.
4.
Read the tire pressure on the
gauge stem and compare it to
the specification shown on the
Tire and Loading Information la-
bel.
5.
Add air to the tire as needed. If
too much air is added, press the
core of the valve stem briefly with
the tip of the gauge stem to
release pressure. Recheck the
pressure and add or release air
as needed.
6.
Install the valve stem cap.
7.
Check the pressure of all other
tires, including the spare.
SIZE
COLD TIRE
INFLATION
PRESSURE
FRONT
ORIGINAL
TIRE
P275/50R22
111H
240 kPa,
35 PSI
P275/60R20
114H
240 kPa,
35 PSI
REAR ORI-
GINAL TIRE
P275/50R22
111H
240 kPa,
35 PSI
P275/60R20
114H
240 kPa,
35 PSI
SPARE TIRE
275/60R20
115M
240 kPa,
35 PSI
P275/60R20
114H
240 kPa,
35 PSI