User's Manual

ManualsBrandsInfiniti ManualsCar SpeakerInfiniti Car Speaker 6.1

Thank you for purchasing an Infinity Kappa Perfect component

system. Kappa Perfect components have been engineered to provide

the most accurate sonic reproduction possible. Over the years, we at

Infinity have listened to hundreds of automotive speakers and we

think these are among the finest. We hope you agree.

This manual includes information that will make your installation as

simple and trouble-free as possible. It also provides detailed technical

information that will help an experienced installer optimize speaker

placement and crossover adjustment. Please study this manual before

you begin your installation. Remember to send in your warranty

registration card, and keep your sales receipt somewhere safe in case

you need warranty service.

kappa series

perfect5.1

perfect6.1

instructions

Summary of content (4 pages)

PAGE 1
kappa series perfect5.1 perfect6.1 Thank you for purchasing an Infinity Kappa Perfect component system. Kappa Perfect components have been engineered to provide the most accurate sonic reproduction possible. Over the years, we at Infinity have listened to hundreds of automotive speakers and we think these are among the finest. We hope you agree. This manual includes information that will make your installation as simple and trouble-free as possible.
PAGE 2
IMPORTANT SPEAKER PLACEMENT Installation of automotive stereo components can require extensive experience performing a variety of mechanical and electrical procedures. Although these instructions explain how to install a Kappa Perfect component system in a general sense, they do not show the exact installation method for your particular car. If you feel you may not have the necessary tools or experience, ask your authorized Infinity car audio dealer about professional installation options.
PAGE 3
WOOFER INSTALLATION ELECTRICAL CONNECTIONS AND CROSSOVER ADJUSTMENTS DECLARATION OF CONFORMITY Tweeter level 4dB Tweeter level +5dB Figure 7. Mounting the P5.1 or P6.1 woofer where there is no factory speaker location. To mount the P5.1 in factory locations, omit the grille and grille tray.
PAGE 4
SPECIFICATIONS System Frequency Response: Power Handling: Nominal Impedance: Sensitivity: Crossover Frequency: SYSTEM RESPONSE CURVES P6.1 75Hz – 23kHz, ±3dB 100W RMS, 400W Peak 4 Ohms 90dB 3.5kHz, 24dB/oct. Linquitz-Riley Acoustic Thiele and Small Parameters P6.1 Woofer Revc: 3.45 Levc: 0.37 Sd: 0.0113 BL: 6.37 Vas: 11.43 Cms: 630.36 Mms: 18.94 Mmd: 18.25 Fs: 46.05 Qms: 3.44 Qes: 0.465 Qts: 0.41 Top-Plate Thickness: 9/32" (7.115mm) Voice-Coil Length: 9/16" (14mm) Voice-Coil Diameter: 1-1/2" (38.