Operation Manual

Instrument brightness control
The instrument brightness control switch can be
operated when the ignition switch is in the ON
position. When the switch is operated, the dot
matrix liquid crystal display switches to the
brightness adjustment mode.
Push the upper switch
䊊
A
to brighten the
instrument panel lights. The bar
䊊
1
moves to
the + side. When reaching the maximum bright-
ness, “MAX” appears on the display
䊊
2
.
Push the lower switch
䊊
B
to dim the instrument
panel lights. The bar
䊊
1
moves to the ⫺ side.
When reaching the minimum brightness, “MIN”
appears on the display
䊊
3
. However, “MIN”
does not appear during the nighttime.
The dot matrix liquid crystal display returns to
the normal display under the following condi-
tions:
● when the instrument brightness control
switch is not operated for more than 5
seconds.
● when the
or switch on the right
side of the combination meter panel is
pushed.
SIC3270
SIC3628
2-38 Instruments and controls