Operation Manual

When the selector lever is shifted into the R
(Reverse) position, the monitor display shows
view to the rear of the vehicle.
The system is designed as an aid to the driver in
detecting large stationary objects to help avoid
damaging the vehicle. The system will not de-
tect small objects below the bumper and may
not detect objects close to the bumper or on the
ground.
WARNING
The rearview camera is a convenience but it
is not a substitute for proper backing up.
Always turn and check that it is safe to do so
before backing up. Always back up slowly.
Objects viewed in the RearView Monitor dif-
fer from actual distance because a wide-
angle lens is used. Objects in the RearView
Monitor will appear visually opposite like
ones viewed in the inside and outside
mirrors.
Make sure that the back door is securely
closed when backing up.
Underneath the bumper and the corner areas
of the bumper cannot be viewed on the rear-
view monitor because of its monitoring
range limitation.
Do not put anything on the rearview camera.
The rearview camera is installed above the
license plate.
When washing the vehicle with high-
pressure water, be sure not to spray it
around the camera. Otherwise, water may
enter the camera unit causing water conden-
sation on the lens, a malfunction, fire or an
electric shock.
Do not strike the camera. It is a precision
instrument. Otherwise, it may malfunction
or cause damage resulting in a fire or an
electric shock.
CAUTION
There is a plastic cover over the camera. Do not
scratch the cover when cleaning dirt or snow
from the cover.
HOW TO READ DISPLAYED LINES
Guiding lines which indicate the vehicle width
and distances to objects with reference to the
bumper line
A
are displayed on the monitor.
Distance guide lines:
Indicate distances from the bumper.
Red line
1
: approx. 1.5 ft (0.5 m)
Yellow line
2
: approx. 3 ft (1 m)
Green line
3
: approx. 7 ft (2 m)
Green line
4
: approx. 10 ft (3 m)
Vehicle width guide lines
5
:
Indicate the vehicle width when backing up.
SAA1896
REARVIEW MONITOR
4-22 Monitor, climate, audio, phone and voice recognition systems