Operation Manual

Backing up near a projecting object
The predicted course lines
䊊
A
do not touch the
object in the display. However, the vehicle may
hit the object if it projects over the actual
backing up course.
Backing up behind a projecting
object
The position
䊊
C
is shown further than the
position
䊊
B
in the display. However, the posi-
tion
䊊
C
is actually at the same distance as the
position
䊊
A
. The vehicle may hit the object
when backing up to the position
䊊
A
if the object
projects over the actual backing up course.
HOW TO ADJUST SCREEN
To adjust the Display ON/OFF, Brightness, Tint,
Color, Contrast and Black Level of the rearview
monitor, push the SETTING button with the
rearview monitor on, select the “Display” key
on the screen and select the item key and
adjust the level using the INFINITI controller.
Do not adjust the Brightness, Tint, Color, Con-
trast and Black Level of the rearview monitor
while the vehicle is moving. Make sure the
parking brake is firmly applied and the engine
is not running.
The display of the predicted course lines can be
set to ON or OFF. For details, see “CAMERA
settings” earlier in this section.
SAA1923 SAA1980
4-26 Monitor, climate, audio, phone and voice recognition systems