Operation Manual

● The view on the screen on the passenger’s
side switches to the front-side view
䊊
C
when
the CAMERA button is pushed
䊊
3
. When the
CAMERA button is pushed again
䊊
5
, the
rear-wide view
䊊
D
is displayed. When the
CAMERA button is pushed again
䊊
7
, the
view on the screen on the passenger’s side
switches to the bird-eye view
䊊
B
.
The passenger’s side screen returns to an-
other by operating the same procedures
again.
When selecting the “Wide”, “Side” or “Top”
key on the screen using the INFINITI control-
ler and pushing the ENTER button, the view
on the screen will change to the one previ-
ously selected
䊊
4
,
䊊
6
,
䊊
8
.
● Once you have changed the view on the
screen on the passenger’s side, the view on
the driver’s side will change to the front view
by shifting the selector lever out of the R
(Reverse) position
䊊
12
,
䊊
14
.
When the selector lever is moved to any
other position than the R (Reverse) position
while the rear-wide view
䊊
D
is displayed,
another view that is set to a higher priority
will be displayed
䊊
16
.
Starting with the CAMERA button
operation
● When the CAMERA button is pushed
䊊
9
while another screen
䊊
A
is displayed,
Around View Monitor operates and the front
view and bird-eye view
䊊
E
are displayed.
● The view on the screen on the passenger’s
side switches to the front-side view
䊊
F
when
the CAMERA button is pushed
䊊
10
. When the
CAMERA button is pushed again
䊊
17
, the
screen
䊊
A
is displayed.
● When selecting the “Side” or “Top” key on
the screen using the INFINITI controller and
pushing the ENTER button, the view on the
screen will change to the one previously
selected
䊊
11
.
● The left screen switches to the rearview
䊊
B
,
䊊
C
when the selector lever is shifted into the
R (Reverse) position
䊊
13
,
䊊
15
and returns to
the front view
䊊
E
,
䊊
F
when the selector lever
is shifted out of the R (Reverse) position
䊊
12
,
䊊
14
.
● Push another button on the control panel to
quit the Around View Monitor.
HOW TO SEE EACH VIEW
WARNING
● The distance guide line and the vehicle
width line should be used as a reference only
when the vehicle is on a paved, level surface.
The distance viewed on the monitor is for
reference only and may be different than the
actual distance between the vehicle and dis-
played objects.
● Use the displayed lines and the bird-eye
view as a reference. The lines and the bird-
eye view are greatly affected by the number
of occupants, fuel level, vehicle position,
road condition and road grade.
● If the tires are replaced with different sized
tires, the predicted course line and the bird-
eye view may be displayed incorrectly.
● When driving the vehicle up a hill, objects
viewed in the monitor are further than they
appear. When driving the vehicle down a hill,
objects viewed in the monitor are closer than
they appear. Use the mirrors or actually look
to properly judge distances to other objects.
The vehicle width and predicted course lines
are wider than the actual width and course.
4-30 Monitor, climate, audio, phone and voice recognition systems