Operation Manual

Front-side view
Guiding lines:
Guiding lines that indicate the width and the
front end of the vehicle are displayed on the
monitor.
The front-of-vehicle line
䊊
1
shows the front part
of the vehicle.
The side-of-vehicle line
䊊
2
shows the vehicle
width including the outside mirror.
The extensions
䊊
3
of both the front
䊊
1
and side
䊊
2
lines are shown with a green dotted line.
The corner sonar indicator
䊊
4
will appear when
a corner of the vehicle moves closer to an
object.
The corner sonar indicator
䊊
4
can be turned off.
See “AROUND VIEW MONITOR SETTINGS” later
in this section.
CAUTION
The turn signal light may overlap with the side-
of-vehicle line. This is not a malfunction.
Infrared illumination:
The images on the front-side view can be dis-
played at night using the infrared illumination
on the outside mirror.
Rear-wide view
The rear-wide view shows a wider area on the
entire screen and allows the checking of the
blind corners on the right and left sides. The
rear-wide view displays an approximately 180-
degree area while the front view and the rear-
view display an approximately 150-degree area.
The predicted course lines are not displayed on
the rear-wide view.
Distance guide lines:
Indicates distances from the vehicle body.
● Red line
䊊
1
: approx. 1.5 ft (0.5 m)
● Yellow line
䊊
2
: approx. 3 ft (1 m)
● Green line
䊊
3
: approx. 7 ft (2 m)
● Green line
䊊
4
: approx. 10 ft (3 m)
SAA1842 SAA2629
Monitor, climate, audio, phone and voice recognition systems 4-33