Operation Manual

5. The system asks the user to speak a name
for the phone.
Speak: “Yes”. The system acknowledges the
command and registers the cellular phone.
If the name is too long or too short, the system
tells the user, then prompts the user for a name
again.
Also, if more than one phone is connected and
the name sounds too much like a name already
used, the system tells the user, then prompts
the user for name again.
PHONEBOOK REGISTRATION
When the cellular phone is connected to the
in-vehicle module, the data stored in the cellu-
lar phone such as phonebook, outgoing call
logs, incoming call logs and missed call logs is
automatically transferred and registered to the
system.
The availability of this function depends on
each cellular phone. The copying procedure
also varies according to each cellular phone.
See cellular phone Owner’s Manual for more
information.
Up to 1,000 phone numbers per registered
cellular phone can be stored in the phonebook.
MAKING A CALL
To make a call, follow the procedures below.
1. Push the button on the steering
wheel. A tone will sound.
2. Speak: “Call”. The system acknowledges
the command and announces the next set
of available commands.
3. Speak the registered person’s name. The
system acknowledges the command and
announces the next set of available com-
mands.
4. Speak: “Yes”. The system acknowledges
the command and makes the call.
5. Once the call has ended, press the
button on the steering wheel.
SAA2578 SAA2579 SAA2580
4-110 Monitor, climate, audio, phone and voice recognition systems