Operation Manual

To lower, push and hold the lock knob and push
the head restraint down.
Removal
Use the following procedure to remove the
adjustable head restraints.
1. Pull the head restraint up to the highest
position.
2. Push and hold the lock knob.
3. Remove the head restraint from the seat.
4. Store the head restraint properly in a
secure place so it is not loose in the
vehicle.
5. Install and properly adjust the head re-
straint before an occupant uses the seat-
ing position.
Install
1. Align the head restraint stalks with the
holes in the seat. Make sure that the head
restraint is facing the correct direction.
The stalk with the adjustment notches
䊊
1
must be installed in the hole with the lock
knob
䊊
2
.
2. Push and hold the lock knob and push the
head restraint down.
3. Properly adjust the head restraint before
an occupant uses the seating position.
SSS0994 SSS0995 SSS0996
1-8 Safety — Seats, seat belts and supplemental restraint system