Operation Manual

The LDP system turns on when you push the
dynamic driver assistance switch on the steer-
ing wheel after starting the engine. The LDP ON
indicator light (green) on the instrument panel
will illuminate. Push the dynamic driver assis-
tance switch again to turn off the LDP system.
The LDP ON indicator light will turn off.
Changing the dynamic driver
assistance switch settings
The dynamic driver assistance switch will turn
on and off the LDP and DCA systems at the
same time when each system is enabled using
the settings menu on the center display.
1. Push the SETTING
䊊
1
button and highlight
the “Driver Assistance” key on the display
using the INFINITI controller. Then push
the ENTER
䊊
2
button.
2. Highlight the “Dynamic Assistance set-
tings” key, and push the ENTER
䊊
2
but-
ton.
Dynamic driver assistance switch
SSD0898
SSD0884
SSD0885
5-22 Starting and driving