Operation Manual

1. Vehicle-to-vehicle distance control mode
2. Conventional (fixed speed) cruise control
mode
Push the MAIN switch
䊊
A
to choose the cruise
control mode between the vehicle-to-vehicle
distance control mode
䊊
1
and the conventional
(fixed speed) cruise control mode
䊊
2
.
To choose the vehicle-to-vehicle distance con-
trol mode
䊊
1
, quickly push and release the
MAIN switch
䊊
A
. To choose the conventional
(fixed speed) cruise control mode
䊊
2
, push and
hold the MAIN switch
䊊
A
for longer than ap-
proximately 1.5 seconds.
Once a control mode is activated, it cannot be
changed to the other cruise control mode. To
change the mode, push the MAIN switch once to
turn the system off. Then push the MAIN switch
again to turn the system back on and select the
desired cruise control mode.
Always confirm the setting in the Intelligent
Cruise Control system display.
For the vehicle-to-vehicle distance control
mode, see the following description. For the
conventional (fixed speed) cruise control mode,
see page 5-50.
SELECTING THE VEHICLE-TO-VEHICLE
DISTANCE CONTROL MODE
To choose the vehicle-to-vehicle distance con-
trol mode
䊊
1
, quickly push and release the
MAIN switch
䊊
A
.
VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE
In the vehicle-to-vehicle distance control mode,
the Intelligent Cruise Control (ICC) system auto-
matically maintains a selected distance from
the vehicle traveling in front of you according to
that vehicle’s speed (up to the set speed), or at
the set speed when the road ahead is clear.
With ICC, the driver can maintain the same
speed as other vehicles without the constant
need to adjust the set speed as you would with
a normal cruise control system.
SSD0899
Starting and driving 5-35