Operation Manual

Setting DCA system to ON/OFF:
1. Push the SETTING
䊊
1
button and highlight
the “Driver Assistance” key on the display
using the INFINITI controller. Then push
the ENTER
䊊
2
button.
2. Highlight the “Dynamic Assistance set-
tings” key, and push the ENTER
䊊
2
but-
ton.
3. To set the DCA system to on or off,
highlight the “Distance Control Assist”
key, select ON or OFF and push the ENTER
䊊
2
button.
If both the LDP and DCA systems are set to OFF
on the display, when the dynamic driver assis-
tance switch is pushed, the LDP ON indicator
light and the Distance Control Assist (DCA)
system switch indicator light will blink for ap-
proximately 2 seconds. See “LANE DEPARTURE
WARNING (LDW) SYSTEM/LANE DEPARTURE PRE-
VENTION (LDP) SYSTEM” earlier in this section.
SSD0884
SSD0885
SSD0886
5-60 Starting and driving