Operation Manual

REPLACING
Replace the wiper blades if they are worn.
1. Pull the wiper arm.
2. Push the release tab
䊊
A
, and then move
the wiper blade down the wiper arm
䊊
1
while pushing the release tab to remove.
3. Insert the new wiper blade onto the wiper
arm until a click sounds.
4. Rotate the wiper blade so the dimple is in
the groove.
CAUTION
● After wiper blade replacement, return the
wiper arm to its original position;
otherwise it may be damaged when the hood
is opened.
● Make sure the wiper blades contact the
glass; otherwise the arm may be damaged
from wind pressure.
If you wax the surface of the hood, be careful
not to let wax get into the washer nozzle
䊊
A
.
This may cause clogging or improper wind-
shield washer operation. If wax gets into the
nozzle, remove it with a needle or small pin
䊊
B
.
Be careful not to damage the nozzle.
SDI2359
SDI2362
8-18 Maintenance and do-it-yourself