Operation Manual

To turn the AFS off, push the OFF side of
the AFS OFF switch. (The AFS OFF indi-
cator light will illuminate.) Push the ON
side of the switch to turn the system on
again.
AFS will also adjust the headlight to a
proper axis automatically, depending on
the number of occupants in the vehicle,
the load the vehicle is carrying and the
road conditions.
If the AFS OFF indicator light blinks after
the ignition switch has been pushed to
the ON position, this may indicate that
the AFS is not functioning properly. Have
the system checked by an INFINITI dealer.
When the engine is started, the head-
lights will vibrate to check the system
condition. This is not a malfunction.
Instrument brightness control
The instrument brightness control oper-
ates when the light switch is in the AUTO
(when lighting),
or position
with the ignition switch in the ON posi-
tion.
Turn the control to the darkening direc-
tion
q
A
or the brightening direction q
B
to
adjust the brightness of instrument panel
lights.
When the control is turned to the upper
end, the light intensity will be at
maximum. When the control is turned to
SIC2645 SIC2566
2-30 Instruments and controls
w 06.3.30/Y50-D X