Operation Manual

If the power supply is disconnected, the
clock will not indicate the correct time. Re-
adjust the time.
ADJUSTING THE TIME
1. To set the clock forward, push the
button
q
1
.
2. To set the clock backward, push the
button
q
2
.
3. To move forward or backward faster,
push and hold the button more than 5
seconds.
For details about display clock adjustment
(if so equipped), see “How to use SETTING
button” in the “4. Monitor, climate, audio,
phone and voice recognition systems”
section.
Power outlet is located on the back of the
center console (Model with DVD drive) or
in the center console (Model without DVD
drive).
CAUTION
O The outlet and plug may be hot during or
immediately after use.
O Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw. Do not
use double adapters or more than one
electrical accessory.
SIC2772 SIC2773
Model with DVD drive
CLOCK POWER OUTLET
Instruments and controls 2-37
w 06.3.30/Y50-D X