Operation Manual

Switching procedure:
Push the LOCK
q
1
and UNLOCK
q
2
buttons on the Intelligent Key si-
multaneously for more than 2 seconds to
switch the mode from one to the other.
When pushing the buttons to set the haz-
ard indicator mode, the hazard indicator
flashes 3 times.
When pushing the buttons to set the haz-
ard indicator and horn mode, the hazard
indicator flashes once and the horn chirps
once.
1. Pull the hood lock release handle
q
1
located below the instrument panel;
the hood will then spring up slightly.
2. Pull the lever
q
2
at the front of the
hood with your fingertips and raise
the hood.
3. When closing the hood, slowly close
the hood and make sure it locks into
place.
WARNING
O Make sure the hood is completely closed
and latched before driving. Failure to do
so could cause the hood to fly open and
result in an accident.
O If you see steam or smoke coming from
the engine compartment, to avoid injury
do not open the hood.
SPA2012
HOOD
Pre-driving checks and adjustments 3-17
w 06.3.30/Y50-D X