Operation Manual

“DISPLAY” settings
The following display will appear when
pushing the SETTING “
” button, se-
lecting “Display” key with the INFINITI
controller and pushing the ENTER
“
” button.
Display:
To turn off the screen, push the ENTER
“
” button and turn the “Display”
indicator off. The other method is to push
the “
” button for more than 2 sec-
onds.
When any mode button is pushed with
the screen off, the screen turns on for fur-
ther operation. The screen will turn off au-
tomatically 5 seconds after the operation
is finished.
To turn on the screen, set this item to the
ON position, or push the “
” button
for more than 2 seconds.
Brightness/Contrast:
To adjust the brightness and contrast of
the screen, select the “Brightness”or
“Contrast” key and push the ENTER
“
” button.
Then, you can adjust the brightness to
“Darker” or “Brighter”, and the contrast
to “Lower” or “Higher” using the multi-
function controller.
For the display mode adjusting proce-
dures while the DVD image or the rear
view is displayed, see “INFINITI mobile
entertainment system (MES)” or “Rear-
View Monitor” later in this section.
“AUDIO” settings
The following display will appear when
pushing the SETTING “
” button, se-
lecting the “AUDIO” key with the multi-
function controller and pushing the ENTER
“
” button.
Bass/Treble/Balance/Fade:
To adjust the speaker tone quality and
sound balance, select the “Bass”,
“Treble”, “Balance”or“Fade” key and ad-
just it with the INFINITI controller.
These items can also be adjusted by
pushing and turning the AUDIO knob.
SAA1455
Navigation equipped model
SAA1085
4-14 Monitor, climate, audio, phone and voice recognition systems
w 06.6.7/Y50-D X