Operation Manual

mode. However, the radio can be
heard.
O It may take some time until the Rear-
View Monitor is displayed after the se-
lector lever has been shifted to R from
another position or to another posi-
tion from R. Objects may be distorted
momentarily until the RearView
Monitor screen is displayed com-
pletely.
O When the temperature is extremely
high or low, the screen may not clearly
display objects. This is not a malfunc-
tion.
O When strong light directly enters the
camera, objects may not be displayed
clearly. This is not a malfunction.
O Vertical lines may be seen in objects
on the screen. This is due to strong re-
flected light from the bumper. This is
not a malfunction.
O The screen may flicker under fluores-
cent light. This is not a malfunction.
O The colors of objects on the RearView
Monitor may differ somewhat from
those of the actual object.
O Objects on the monitor may not be
clear in a dark place or at night. This
is not a malfunction.
O If dirt, rain or snow attaches to the
camera, the RearView Monitor may not
clearly display objects. Clean the cam-
era.
O Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration. To clean the camera,
wipe with a cloth dampened with di-
luted mild cleaning agent and then
wipe with a dry cloth.
O Do not damage the camera as the
monitor screen may be adversely af-
fected.
O Do not use wax on the camera
window. Wipe off any wax with a clean
cloth dampened with mild detergent
diluted with water.
Open or close, and adjust the air flow di-
rection of ventilators.
: This symbol indicates that the
vents are closed.
: This symbol indicates that the
vents are open.
SAA1100
Front
VENTILATORS
Monitor, climate, audio, phone and voice recognition systems 4-23
w 06.3.30/Y50-D X