Operation Manual

lowing options instead of “Bluetooth” in
step 4 above.
Keypad:
Input the name and phone number manually.
Outgoing Calls:
Store the name and phone number from
the outgoing call list.
Incoming Calls:
Store the name and phone number from
the incoming call list.
To delete an item, Select the “Delete
item” key and push the ENTER “
”
button.
MAKING A CALL
To make a call, follow the procedures be-
low.
1. Push the PHONE “
” button on the
instrument panel or the “
” button
on the steering-wheel-mounted con-
trols for more than 1 second. The
“PHONE” screen will appear on the
display.
2. Select the “Phonebook” key on the
“PHONE” menu, and push the ENTER
“
” button.
3. Select the registered person’s name
from the list, and push the ENTER
“
” button. Dialing will start.
4. After the call is over, perform one of
the following to finish the call.
a.Select the “Hang up” key and push
the ENTER “
” button.
b.Push and hold the “
” button on
the steering-wheel-mounted controls
for 1.5 seconds.
c. Push the PHONE “
” button on the
instrument panel.
There are different methods to make a
call. Select one of the following options
instead of “Phonebook” in step 2 above.
Redial:
Dial the previously dialed number again.
Call Logs - Outgoing Calls:
Select the name and phone number from
the outgoing call logs.
Call Logs - Incoming Calls:
Select the name and phone number from
the incoming call logs.
Dial Keypad:
Input the phone number manually.
SAA1121
Monitor, climate, audio, phone and voice recognition systems 4-65
w 06.3.30/Y50-D X