Operation Manual

Shift lock release
If the battery charge is low or discharged,
the selector lever may not be moved from
the P (Park) position even with the brake
pedal depressed and the selector lever
button pushed.
To move the selector lever, perform the
following procedure:
1. Push the ignition switch to the LOCK
position.
2. Apply the parking brake.
3. Remove the shift lock cover
q
A
using a
suitable tool.
4. Push down the shift lock
q
B
as illus-
trated.
5. Push the selector lever button
q
C
and
move the selector lever to N (Neutral)
position
q
D
while holding down the
shift lock.
6. Push the ignition switch to the ON po-
sition to unlock the steering wheel.
Now the vehicle may be moved to the
desired location.
If the battery is discharged completely,
the steering wheel cannot be unlocked.
Do not move the vehicle with the steering
wheel locked.
If the lever cannot be moved out of P
(Park), have an INFINITI dealer check the
automatic transmission system as soon
as possible.
To apply: Fully depress the parking brake
pedal.
To release:
1. Firmly apply the foot brake.
2. Depress the parking brake pedal and
the parking brake will be released.
3. Before driving, be sure the brake
warning light goes out.
SSD0450 SPA2126
PARKING BRAKE
5-14 Starting and driving
w 06.3.30/Y50-D X