Operation Manual

hicle to the desired speed, push the
SET/COAST switch and release it. (The
CRUISE SET indicator will come on in the
instrument panel.) Take your foot off the
accelerator pedal. Your vehicle will main-
tain the set speed.
O To pass another vehicle, depress the
accelerator pedal. When you release
the pedal, the vehicle will return to
the previously set speed.
O
The vehicle may not maintain the set
speed on winding or hilly roads. If this
happens, drive without the cruise con-
trol.
To cancel the preset speed, follow any of
these methods:
a) Push the CANCEL button. The SET indi-
cator will go out.
b) Tap the brake pedal. The SET indicator
will go out.
c) Move the selector lever to the N (Neu-
tral) position. The SET indicator will go
out.
d) Turn the MAIN switch off. Both the
CRUISE indicator and SET indicator will
go out.
O If you depress the brake pedal while
pushing the RESUME/ACCELERATE or
SET/COAST switch and reset at the
cruising speed, the cruise control will
disengage. Turn the MAIN switch off
once and then turn it on again.
O The cruise control will automatically
cancel if the vehicle slows more than
8 MPH (12 km/h) below the set speed.
To reset at a faster cruising speed, use one
of the following methods:
O Depress the accelerator pedal. When
the vehicle attains the desired speed,
push and release the SET/COAST
switch.
O Push and hold the RESUME/
ACCELERATE switch. When the vehicle
attains the speed you desire, release
the switch.
O Push, then quickly release the
RESUME/ACCELERATE switch. Each
time you do this, the set speed will in-
crease by about 1 MPH (1.6 km/h).
To reset at a slower cruising speed, use
one of the following methods:
O Lightly tap the brake pedal. When the
vehicle attains the desired speed,
push the SET/COAST switch and re-
lease it.
O Push and hold the SET/COAST switch.
Release the switch when the vehicle
slows down to the desired speed.
O Push, then quickly release the
SET/COAST switch. Each time you do
this, the set speed will decrease by
about 1 MPH (1.6 km/h).
To resume the preset speed, push and re-
lease the RESUME/ACCELERATE switch.
The vehicle will resume the last set cruis-
ing speed when the vehicle speed is over
25 MPH (40 km/h).
5-20 Starting and driving
w 06.3.30/Y50-D X