Operation Manual

3. Secure the child restraint anchor at-
tachments to the LATCH lower an-
chors.
4. For child restraints that are equipped
with webbing mounted attachments,
remove any additional slack from the
anchor attachments. Press downward
and rearward firmly in the center of
the child restraint with your hand to
compress the vehicle seat cushion and
seatback while tightening the webbing
of the anchor attachments.
5. Before placing the child in the child
restraint, hold the child restraint near
the LATCH attachment and use force to
push the child restraint from side to
side, and tug it forward to make sure
that it is securely held in place. It
should not move more than 1 in (25
mm). If it does move more than 1 in
(25 mm), pull again on the anchor at-
tachments to further tighten the child
restraint. If you are unable to properly
secure the restraint, move the re-
straint to another seating position and
try again, or try a different child re-
SSS0649
Rear facing − step 3
SSS0639
Rear facing − step 4
SSS0650
Rear facing − step 5
1-24 Safety — Seats, seat belts and supplemental restraint system
w 06.3.30/Y50-D X