Operation Manual

12. If the child restraint is installed in the
front passenger seat, push the igni-
tion switch to the ON position. The
front passenger air bag status light
should illuminate. If this light is
not illuminated, see “Front passenger
air bag and status light” in this sec-
tion. Move the child restraint to an-
other seating position. Have the
system checked by an INFINITI dealer.
After the child restraint is removed and
the seat belt is fully retracted, the auto-
matic locking mode (child restraint mode)
is canceled.
Rear-facing
Follow these steps to install a rear-facing
child restraint using the vehicle seat belt
in the rear seat:
1. If your vehicle is equipped with rear
power seat adjustment, adjust the rear
outboard seats to the uplight and re-
armost position.
O Do not move the rear outboard seats
with the child restraints attached to
them.
2. Child restraints for infants must be
used in the rear-facing direction and
therefore must not be used in the front
seat. Position the child restraint on
the seat. Always follow the restraint
manufacturer’s instructions.
SSS0481
Front facing — step 12
SSS0100
Safety — Seats, seat belts and supplemental restraint system 1-29
w 06.3.30/Y50-D X