Operation Manual

as soon as it is convenient, preferably be-
fore the gauge reaches “E”. There will be
a small reserve of fuel in the tank when
the fuel gauge needle reaches “E”.
The
indicates that the fuel-filler door
is located on the passenger’s side of the
vehicle.
CAUTION
O If the vehicle runs out of fuel, the
malfunction indicator light (MIL)
may come on. Refuel as soon as pos-
sible. After a few driving trips, the
lamp should turn off. If the lamp
remains on after a few driving trips, have
the vehicle inspected by an INFINITI
dealer.
O For additional information, see “Mal-
function indicator lamp (MIL)” later in
this section.
METER/RING ILLUMINATION AND
NEEDLE SWEEP
The ring illumination surrounding meters
and gauges illuminates when the driver’s
door is closed after getting into the ve-
hicle with the Intelligent Key carried in.
When the engine is started, the indicator
needles will sweep in the speedometer
and tachometer and the ring illumination
will be brightened gradually.
Meter illumination control knob
The meter illumination control knob
q
1
operates when the headlight switch is in
the AUTO (not lighting) or OFF position
with the ignition switch in the ON posi-
tion.
To adjust the brightness of the meters,
push the control knob several times until
the desired brightness is achieved.
To turn the ring illumination and needle
sweep on and off, push the control knob
and hold it for 1 second.
SIC2874
Instruments and controls 2-7
w 06.6.7/Y50-D X