Operation Manual

INDICATORS FOR OPERATION
1. Engine start operation indicator
(ignition switch in the LOCK or
ACC position)
This indicator appears when the ignition
switch is in the LOCK or ACC position with
the selector lever in the “P” position.
This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed.
2. Engine start operation indicator
(ignition switch in the ON
position)
This indicator appears when the ignition
switch is in the ON position with the se-
lector lever in the “P” position.
This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed.
3. Steering lock release
malfunction indicator
This indicator appears when the steering
wheel cannot be released from the LOCK
position.
If this indicator appears, push the push-
button ignition switch while lightly
turning the steering wheel right and left.
4. Intelligent Key insertion
indicator
This indicator appears when the Intelli-
gent Key needs to be inserted into the In-
telligent Key port. (For example, the Intel-
ligent Key battery is discharged.)
If this indicator appears, insert the Intelli-
gent Key into the Intelligent Key port in
the correct direction. See “Push-button ig-
nition switch” in the “5. Starting and driv-
ing” section.
5. Intelligent Key removal
indicator
This indicator appears when the driver’s
door is opened with the ignition switch in
the LOCK position and the Intelligent Key
placed in the Intelligent Key port. A key
reminder chime also sounds.
If this indicator appears, remove the Intel-
ligent Key from the Intelligent Key port
and take it with you when leaving the ve-
hicle.
6. NO KEY warning
This warning appears when the door is
closed with the Intelligent Key left outside
the vehicle and the ignition switch in the
ACC or ON position.
If this warning appears, make sure the In-
telligent Key is returned to the inside of
the vehicle.
When all the doors are closed, an outside
chime and inside warning chime will also
sound. See “Intelligent Key system” in
the “3. Pre-driving checks and adjust-
ments” section.
7. SHIFT “P” warning
This warning appears when the ignition
switch is pushed to stop the engine with
the selector lever in any position except
the P position.
If this warning appears, the ignition
switch is in the ACC position instead of
the LOCK position. Move the selector
lever to the “P” position or push the igni-
tion switch to the ON position.
An inside warning chime will also sound.
See “Intelligent Key system” in the
“3. Pre-driving checks and adjustments”
section.
Instruments and controls 2-21
w 06.3.30/Y50-D X