Operation Manual

8. “LOCK” warning
This warning appears when the selector
lever is moved to the “P” position with
the ignition switch in the ACC position af-
ter the SHIFT “P” warning appears.
To push the ignition switch to the LOCK
position, perform the following procedure:
SHIFT “P” warning → (Move the selec-
tor lever to “P”) → LOCK warning →
(Push the ignition switch → ignition
switch position is turned to ON) →
LOCK warning → (Push the ignition
switch → ignition switch position is
turned to LOCK)
9. NO KEY ID indicator
This indicator appears when the ignition
switch is pushed and the Intelligent Key
cannot be recognized by the system with
the ignition switch in the LOCK position.
If this indicator appears, you cannot start
the engine. Check for the following
causes and perform remedies:
O The battery of the Intelligent Key car-
ried with you is discharged com-
pletely. Replace the battery with a new
one.
O The Intelligent Key carried with you is
not registered to the system. Use the
registered Intelligent Key.
O You do not have an Intelligent Key
with you. Carry an Intelligent Key with
you.
10. Intelligent Key battery
discharge indicator
This indicator appears when the Intelli-
gent Key battery is running out of power.
If this indicator appears, replace the bat-
tery with a new one. See “Intelligent Key
battery replacement” in the “8. Mainte-
nance and do-it-yourself” section.
Your vehicle has two types of security
systems, as follows:
O Vehicle security
O INFINITI Vehicle Immobilizer System
The security condition will be shown by
the security indicator light.
VEHICLE SECURITY SYSTEM
The vehicle security system provides vi-
sual and audio alarm signals if someone
opens the doors, hood, or trunk lid when
the system is armed. It is not, however, a
motion detection type system that acti-
SIC2132
SECURITY SYSTEMS
2-22 Instruments and controls
w 06.3.30/Y50-D X