Powered Subwoofers PS -10 PS -12 Owner’s Guide (120V)
IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
INTRODUCTION Infinity PS-10 and PS-12 Powered Subwoofers The Infinity PS-10 and PS-12 powered subwoofers continue Infinity’s longstanding commitment to accurate sound reproduction. Our proprietary technology and engineering resources work together to deliver uncompromised low-frequency performance in any stereo or multichannel home theater system. Unpacking the Subwoofer If you suspect damage from transit, report it immediately to your dealer. Keep the shipping carton and packing materials for future use.
CONTROLS AND CONNECTIONS Rear Panel ¡ Subwoofer-Level Control ™ LFE/Normal Selector • ¡ £ Phase Switch LEVEL Green: On Red: Stand-By ¢ Crossover Adjustment Max Min LFE PHASE NORMAL 180º 0º £ 80Hz CROSSOVER FREQUENCY ¢ 150Hz 50Hz L ∞ R LINE LEVEL IN For LFE use L or R L HIGH LEVEL IN § R + – ON OFF ¶ POWER 120V 60Hz CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SYSTEM CONNECTIONS If you have a Dolby* Digital or DTS® receiver/processor with a low-frequency-effects (LFE) or subwoofer output: If your receiver/processor does not have subwoofer outputs for the left and right channels or an LFE output, connect speaker wire from your receiver/amplifier to your speakers and subwoofer using two sets of speaker wire: SUBWOOFER OR LFE OUTPUT LEVEL Green: On Red: Stand-By Max Min LFE PHASE PHASE 150Hz 50Hz Max LFE 180º CROSSOVER FREQUENCY LEVEL Min 0º 80Hz RE
OPERATION Power On Plug your subwoofer’s AC cord into a wall outlet. Do not use the outlets on the back of the receiver. Initially set the Subwoofer-Level Control ¡ to the “min” position. Turn on your sub by pressing the Power Switch ¶ on the rear panel. Turn on your entire audio system and start a CD or movie soundtrack at a moderate level.
SPECIFICATIONS PS-10 PS-12 Frequency Response: 27Hz – 150Hz (±3dB) 25Hz – 150Hz (±3dB) Maximum Amplifier Output: 250 watts RMS 300 watts RMS Crossover Frequencies: 50Hz – 150Hz, 24dB/octave, continuously variable 50Hz – 150Hz 24dB/octave, continuously variable Driver: 10" 12" Dimensions (H x W x D): 14-3/4" x 12-1/2" x 16" (375mm x 318mm x 406mm) 16-1/2" x 14-3/8" x 17-1/2" (419mm x 365mm x 445mm) Weight: 38 lb (17.3kg) 45 lb (20.5kg) (20Hz – 150Hz with no more than 0.
© 2003 Harman International Industries, Incorporated Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516-674-4INF www.infinitysystems.com * Trademark of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc. Infinity is a registered trademark of Harman International Industries, Incorporated. Part No.