Printing: June 2012 (12) / OM3E 0S51U0 / Printed in U.S.A. 2013 Infiniti FX 1179129 EN Infiniti FX OM.indd 1 For your safety, read carefully and keep in this vehicle.
Foreword GUID-2A3E000D-12ED-4DE3-A596-A8B7048A6C6C Your INFINITI represents a new way of thinking about vehicle design. It integrates advanced engineering and superior craftsmanship with a simple, refined aesthetic sensitivity associated with traditional Japanese culture. The result is a different notion of luxury and beauty.
. ALWAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle. ing from modification will not be covered under the INFINITI warranties. . ALWAYS review this Owner’s Manual for important safety information. WHEN READING THE MANUAL GUID-C811BE6E-DC07-41D4-BDB5-6BCFE759DC24 ON-PAVEMENT AND OFF-ROAD DRIVING This vehicle will handle and maneuver differently from an ordinary passenger car because it has a higher center of gravity for off-road use.
those above call attention to an item in the illustration. CALIFORNIA PROPOSITION 65 WARNING GUID-B3DA6D95-2E90-4903-97DE-D000056F1E22 WARNING SIC0697 If you see the symbol above, it means “Do not do this” or “Do not let this happen”. NOS1274 If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle. NOS1275 Arrows in an illustration that are similar to those above indicate movement or action.
INFINITI CUSTOMER CARE PROGRAM GUID-393471D7-DDC7-432D-AF47-304A23653BB2 INFINITI CARES ... Both INFINITI and your INFINITI retailer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your INFINITI retailer are our primary concerns. Your INFINITI retailer is always available to assist you with all your automobile sales and service needs.
Table of Contents Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and controls 2 Pre-driving checks and adjustments 3 Monitor, climate, audio, phone and voice recognition systems 4 Starting and driving 5 In case of emergency 6 Appearance and care 7 Maintenance and do-it-yourself 8 Technical and consumer information 9 Index 10
0 Illustrated table of contents Seats, seat belts and supplemental restraint system (SRS) ....................................................... ... Exterior front ....................................................... ... Exterior rear......................................................... ... Passenger compartment ...................................... ... Cockpit ................................................................ ... 0-2 0-3 0-4 0-5 0-6 Instrument panel ...............................
SEATS, SEAT BELTS AND SUPPLEMENTAL RESTRAINT SYSTEM (SRS) GUID-794FCEB3-93FF-4004-9F1C-E3D1BA4A5BDF CHildren) system (P.1-22) Rear armrest (P.1-10) Rear seats (P.1-5) — Child restraints (P.1-20) 9. Front seat-mounted side-impact supplemental air bags (P.1-37) 10. Seat belt pretensioner (P.1-50) 11. Front seats (P.1-3) — Occupant classification sensors (weight sensors) (P.1-43) 12. Front passenger air bag status light (P.1-45) 7. 8. JVC0316X 1. 2. 3.
EXTERIOR FRONT GUID-3F190944-B4F9-4F55-848C-0ACF5C43E6FF 8. 9. 10. 11. 12. 13. — Side view camera (if so equipped) (P.4-31) — Welcome light (P.2-63) Doors — Keys (P.3-2) — Door locks (P.3-4) — Intelligent Key system (P.3-6) — Remote keyless entry system (P.3-14) Recovery hook (P.6-16) Front view camera (if so equipped) (P.4-31) Fog light (P.2-43) Sonar sensor (if so equipped) — Around View Monitor (P.4-31) Tires — Wheel and tires (P.8-32, P.9-9) — Flat tire (P.
EXTERIOR REAR GUID-97B05AAC-BA66-4C07-A532-03341EAF4772 7. Sonar sensor (if so equipped) — Around View Monitor (P.4-31) 8. Rear combination light (Bulb replacement) (P.8-29) 9. Fuel-filler door (P.3-24) — Fuel recommendation (P.9-4) 10. Child safety rear door locks (P.3-6) SSI0446 1. 2. 3. 0-4 Rear view camera (P.4-24, P.4-31) Lift gate (P.3-18) — Intelligent Key system (P.3-6) — Remote keyless entry system (P.3-14) Rear window defroster (P.2-36) Illustrated table of contents 4. 5. 6.
PASSENGER COMPARTMENT GUID-194C4A6B-A471-4092-BEDF-EF4C2DBD74AF 10. Cargo cover (if so equipped) (P.2-56) 11. Rear cup holders (P.2-50) 12. Console box — Power outlet (P.2-49) — USB memory operation (P.4-78) or iPod® player operation (P.4-87) 13. Front cup holders (P.2-50) JVC0315X 1. 2. 3. 4. 5. Coat hooks (P.2-54) Rear personal light (P.2-64) Power window controls (P.2-59) Automatic drive positioner switch (if so equipped) (P.3-32) Sun visors (P.3-28) 6. 7. 8. 9. Moonroof switch (P.
COCKPIT GUID-D9E4FAA2-776C-401D-BFFC-C90DAAA337CA 6. 7. 8. 9. SIC4246 1. 2. 3. 0-6 Outside mirror remote control switch (P.3-30) Intelligent Brake Assist (IBA) off switch (if so equipped) (P.2-48) Instrument brightness control switch (P.2-42) Illustrated table of contents 4. 5. Headlight, fog light and turn signal switch (P.2-37) Steering-wheel-mounted controls (left side) — For audio system (P.4-54) — For Bluetooth® Hands-Free Phone 9. System (with navigation system) (P.
10. Vehicle Dynamic Control (VDC) OFF switch (P.5-83) 11. Intelligent Key port (P.5-13) 12. Power lift gate switch (P.3-18) 13. Power lift gate main switch (P.3-18) 14. TRIP/RESET switch for twin trip odometer (P.2-7) 15. Electric tilting/telescopic steering wheel lever (if so equipped) (P.3-27) 16. Manual tilting/telescopic steering wheel lever (if so equipped) (P.3-27) 17. Center-console-mounted controls — Climate controlled seat switches (P.2-45) or Seat heater switches (P.2-43) — SNOW mode switch (P.
INSTRUMENT PANEL GUID-64430E38-4D64-41A9-9A8D-212C3600A5A4 7. 8. 9. JVC0209X 1. 2. 3. 4. 5. 0-8 Side ventilator (P.4-48) Paddle shifter (if so equipped) (P.5-17) Meters and gauges (P.2-6) Center ventilator (P.4-48) Center multi-function control panel — Navigation system* (if so Illustrated table of contents 6. equipped) — Vehicle information and setting buttons (P.4-9) — Around View Monitor (if so equipped) (P.4-31) Center display (P.4-3) Clock (P.2-49) Hazard warning flasher switch (P.
METERS AND GAUGES GUID-E66B4AB4-D34D-4D06-BEFF-25AE613A9BDC SIC3825 1. 2. 3. 4. 5. Tachometer (P.2-7) Warning/Indicator lights (P.2-12) Speedometer (P.2-6) Engine coolant temperature gauge (P.2-8) Dot matrix liquid crystal display/ 6. Odometer/twin trip odometer (P.2-21) Fuel gauge (P.
ENGINE COMPARTMENT GUID-0E9F7C61-12C7-4359-B3A7-F2B6A5B2D72A 11. Coolant reservoir (P.8-9) SDI2262 VQ37VHR ENGINE GUID-E1D33D79-85C2-48D3-81C3-5821CAFCD554 1. 2. 3. 4. 5. 0-10 Fuse/fusible link holder (P.8-25) Battery (P.8-17) Radiator filler cap (P.8-9) Engine oil dipstick (P.8-11) Engine oil filler cap (P.8-11) Illustrated table of contents 6. 7. Brake fluid reservoir (P.8-16) Window washer fluid reservoir (P.8-16) 8. Power steering fluid reservoir (P.8-15) 9. Air cleaner (P.8-21) 10.
11. Coolant reservoir (P.8-9) SDI2264 VK50VE ENGINE GUID-B346F336-F455-4747-ABBD-D987DA3CB446 1. 2. 3. 4. 5. Fuse/fusible link holder (P.8-25) Battery (P.8-17) Engine oil filler cap (P.8-11) Radiator filler cap (P.8-9) Engine oil dipstick (P.8-11) 6. 7. Brake fluid reservoir (P.8-16) Window washer fluid reservoir (P.8-16) 8. Power steering fluid reservoir (P.8-15) 9. Air cleaner (P.8-21) 10. Drive belt location (P.
WARNING AND INDICATOR LIGHTS GUID-B9B205DD-BA4F-46E1-BDB8-CF9F6E9167BE Warning light Name Page All-Wheel Drive (AWD) warning light (AWD models)* 2-13 Anti-lock Braking System (ABS) warning light 0-12 2-13 Warning light Name Page Indicator light Name Page 2-17 Adaptive Front lighting System (AFS) indicator light* 2-18 Supplemental air bag warning light 2-17 Automatic Transmission position indicator light 2-18 Vehicle Dynamic Control (VDC) warning light 2-18 Exterior light indicator 2
1 Safety — Seats, seat belts and supplemental restraint system Seats ................................................................... ... 1-2 Front seats ...................................................... ... 1-3 Rear seats ....................................................... ... 1-5 Head restraints................................................ ... 1-6 Armrest ........................................................ ... 1-10 Seat belts .......................................................... .
SEATS GUID-9CBF711E-59D2-407E-A401-0C8522180508 sits well back and straight up in the seat. If the seatback is reclined, the risk of sliding under the lap belt and being injured is increased. SSS0133 seat with both feet on the floor and adjust the seat belt properly. See “Precautions on seat belt usage” (P.1-11). WARNING . . Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body.
FRONT SEATS GUID-678B214B-76A0-4F26-9669-C3D23626B7A7 Front powerGUID-B3E66E69-74EF-49BA-B3BC-0170A0521FE7 seat adjustment Operating tips: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 . The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. . Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery. See “Automatic drive positioner” (P.
SSS1052 Seat lifter: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Push the front or rear end of the switch up or down to adjust the angle or height of the seat. 1-4 SSS1053 Lumbar support: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The lumbar support feature provides lower back support to the driver. Push the front or back end of the switch to adjust the seatback lumbar area.
accident or sudden stop. . When returning the seatbacks to the upright position, be certain they are completely secured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. . Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury.
HEAD RESTRAINTS GUID-8F58192F-E0AD-4A79-A263-2FFDBCA36632 WARNING . . . WARNING Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries. For the most effective protection when the vehicle is in motion, the seat should be upright.
JVR0051X SSS0992 SSS0997 The illustration shows the seating positions equipped with head restraints and headrest. The head restraints are adjustable. Components GUID-B760D026-BA55-4DD2-A3AD-F67CD7F33F79 AdjustmentGUID-C9EBA4E5-3CE0-492A-AF1F-F0A6F23F7957 1. Head restraint Adjust the head restraint so the center is level with the center of your ears. Indicates the seating position is equipped with a head restraint. 3. Lock knob 2. Adjustment notches 4.
SSS0993 To raise the head restraint, pull it up. SSS0994 To lower, push and hold the lock knob and push the head restraint down. SSS0995 Removal GUID-B30C0D05-F799-4C44-9CF0-9C9E2A7ADD31 Use the following procedure to remove the adjustable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly in a secure place so it is not loose in the vehicle. 5.
seating position. SSS0996 Install GUID-2CB87255-008D-4C17-8007-A2FE6393CF70 1. Align the head restraint stalks with the holes in the seat. Make sure that the head restraint is facing the correct direction. The stalk with the adjustment 1 must be installed in the notches * 2 . hole with the lock knob * 2. Push and hold the lock knob and push the head restraint down. 3. Properly adjust the head restraint before an occupant uses the seating position.
certain rear-end collisions. After the collision, the head restraints return to their original position. Adjust the Active Head Restraints properly as described earlier in this section. SSS0901 ARMREST GUID-796B28EC-E3F5-48D8-8713-16D5DDA3C317 Rear armrest GUID-D83510AB-0635-4587-B091-5BFBE7542958 Pull the tab and draw the armrest forward until it is horizontal.
SEAT BELTS GUID-93F549EC-455F-4396-93E6-EF14CE69CD19 PRECAUTIONS ON SEAT BELT USAGE GUID-1DE9A315-F8DA-49DB-BCFE-8A2E0B64BF49 If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced.
WARNING . . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly restrained in the rear seat and, if appropriate, in a child restraint. The seat belt should be properly adjusted to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident. Serious injury or death can occur if the seat belt is not worn properly. .
PREGNANT GUID-D69B412B-40FA-43AC-A545-A3C5EF5BE114 WOMEN INFINITI recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specific recommendations.
tened, it may indicate the pre-crash seat belt system has a malfunction. Have your INFINITI retailer check and repair the system. When the seat belt is retracted repeatedly in a short period of time, the motor may not be able to retract the seat belt. After 30 seconds, the motor reactivates and retracts the seat belt. If the seat belt still cannot be retracted by the motor, the pre-crash seat belt system has a malfunction. Have your INFINITI retailer check and repair the system.
some freedom of movement in the seat. The ELR locks the seat belt when the vehicle slows down rapidly or during impacts. Then smoothly pull the belt out of the retractor. The Automatic Locking Retractor (ALR) mode (child restraint mode) locks the seat belt for child restraint installation. SSS0290 3. Position the lap belt portion low and snug on the hips as shown. 4. Pull the shoulder belt portion toward the retractor to take up extra slack.
To increase your confidence in the seat belts, check the operation as follows: . Grasp the shoulder belt and pull forward quickly. The retractor should lock and restrict further belt movement. If the retractor does not lock during this check or if you have any question about seat belt operation, see an INFINITI retailer. SSS0326 Unfastening the seat belts GUID-9AD4A09B-1DA1-410A-88F0-CD89BE9FE3DC To unfasten the seat belt, push the button on the buckle. The seat belt automatically retracts.
position. See an INFINITI retailer for assistance with purchasing an extender if an extender is required. WARNING . . After adjustment, release the adjustment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position. The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident. WARNING .
CHILD SAFETY GUID-FA1D1829-C309-4510-8618-F48D1D554AE1 until they are completely dry. . If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth. . Periodically check to see that the seat belt and the metal components such as buckles, tongues, retractors, flexible wires and anchors work properly.
children. See “Child restraints” (P.1-20). SMALL CHILDREN GUID-F382AC55-409F-4B30-A21C-AA6822D1BBBB A child restraint may be secured in the vehicle by using either the LATCH (Lower Anchor and Tethers for CHildren) system or with the vehicle seat belt. See “Child restraints” (P.1-20) for more information. Children that are over 1 year old and weigh at least 20 lbs (9 kg) should remain in a rear-facing child restraint as long as possible up to the height or weight limit of the child restraint.
CHILD RESTRAINTS GUID-2D9AAD53-E6B9-4AC7-B702-B89A978CB631 PRECAUTIONS ON CHILD RESTRAINTS GUID-073C4675-8E8E-42CC-8457-00D1388A6875 WARNING Never let a child stand or kneel on any seat and do not allow a child in the cargo area. The child could be seriously injured or killed in a sudden stop or collision. WARNING .
ward-facing child restraint installation using the seat belts” (P.1-30). — Even with the INFINITI Advanced Air Bag System, never install a rearfacing child restraint in the front seat. An inflating air bag could seriously injure or kill a child. A rear-facing child restraint must only be used in the rear seat. . When the child restraint is not in use, keep it secured with the LATCH system or a seat belt. In a sudden stop or collision, loose objects can injure occupants or damage the vehicle.
LATCH lower anchor GUID-A4FEBABC-61F4-4403-B1D2-A6D4AA130B9C WARNING Failure to follow the warnings and instructions for proper use and installation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: . Attach LATCH system compatible child restraints only at the locations shown in the illustration. . Do not secure a child restraint in the center rear seating position using the LATCH lower anchors.
SSS0643 LATCH webbing-mounted attachment Installing child restraint LATCH lower anchor attachments GUID-93E34B42-CCE2-45A9-884B-299A11E654E9 LATCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. With this system, you do not have to use a vehicle seat belt to secure the child restraint. Check your child restraint for a label stating that it is compatible with LATCH.
strap is damaged. . ufacturer’s instructions. Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or cargo that contacts the top tether strap may damage the top tether strap during a collision. Your child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged.
SSS0649 Rear-facing rigid-mounted — step 2 SSS0639 Rear-facing — step 3 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. SSS0650 Rear-facing — step 4 4.
applicable). Not all child restraints fit in all types of vehicles. 5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 4. SSS0100 REAR-FACING CHILD RESTRAINT INSTALLATIONGUID-D3F4C3D8-8360-4708-B22B-29C7AB90AB54 USING THE SEAT BELTS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint.
SSS0654 Rear-facing — step 2 2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing. SSS0655 Rear-facing — step 3 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode).
7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING LATCH GUID-7EBAF34F-5817-4D99-B91E-DABAC509F683 SSS0657 Rear-facing — step 5 5.
straint fit, try another seating position or a different child restraint. SSS0645 Forward-facing web-mounted — step 2 2. Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchors. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor point. See “Installing top tether strap” in this section.
7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 6. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS GUID-939323AA-D7EA-4146-8995-382D1986C0E1 WARNING SSS0647 Forward-facing — step 4 4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments.
2. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions. The back of the child restraint should be secured against the vehicle seatback. SSS0640 Forward-facing (front passenger seat) — step 1 Refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint.
SSS0651 Forward-facing — step 4 4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode). It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. SSS0652 Forward-facing — step 5 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt.
9. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 2 through 8. SSS0641 Forward-facing — step 8 8. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and check to see if the belt holds the restraint in place.
2. Secure the top tether strap to the tether anchor point on the back of seatback behind the child restraint. 3. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap, consult your INFINITI retailer for details.
Booster seat installation GUID-40E07C14-FDFC-455A-BC3F-EBD09D23E55A CAUTION Do not use the lap/shoulder belt Automatic Locking Retractor (ALR) mode when using a booster seat with the seat belts. LRS0453 . Check the booster seat in your vehicle to be sure it is compatible with the vehicle’s seat and seat belt system. . Make sure the child’s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the center of the child’s ears.
fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s instructions for adjusting the seat belt routing. SSS0640 1. If you must install a booster seat in the front seat, move the seat to the rearmost position. 2. Position the booster seat on the seat. Only place it in a forward-facing direction. Always follow the booster seat manufacturer’s instructions.
SUPPLEMENTAL RESTRAINT SYSTEM GUID-F6D913F1-B34B-47D6-B194-2620EAB92591 PRECAUTIONS ON SUPPLEMENTAL RESTRAINT GUID-CE08E248-5EC8-462E-8397-4F3154CA92C6 SYSTEM This Supplemental Restraint System (SRS) section contains important information concerning the following systems. SSS0676 7. If the booster seat is installed in the front passenger seat, push the ignition switch to the ON position.
7 seconds if the systems are operational.
WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. . The front passenger air bag will not inflate if the passenger air bag status light is lit or if the front passenger seat is unoccupied. See “Front passenger air bag and status light” (P.1-45). .
WARNING SSS0008 SSS0009 1-40 Safety — Seats, seat belts and supplemental restraint system . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. . Children may be severely injured or killed when the front air bags, side air bags or curtain and rollover air bags inflate if they are not properly restrained.
SSS0832 SSS0140 SSS0159 WARNING Front seat-mounted side-impact supplemental air bags and roof-mounted curtain sideimpact and rollover supplemental air bags: SSS0833 . The side air bags and curtain and rollover air bags ordinarily will not inflate in the event of a frontal impact, rear impact or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. .
curtain and rollover air bags are most effective when you are sitting well back and upright in the seat. The side air bags and curtain and rollover air bags inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bags on the side of the seatback of the front seat or near the side roof rails. Do not allow anyone sitting in the front seats or rear outboard seats to extend their hand out of the window or lean against the door.
8. Air bag Control Unit (ACU) 9. Satellite sensors 10. Seat belt pretensioners INFINITI ADVANCED AIR BAG SYSTEM (front seats) GUID-894AF5B1-4C87-4697-A7FB-E0BA22FADE03 WARNING To ensure proper operation of the passenger’s advanced air bag system, please observe the following items. SSS0903 1. 2. 3. 4. Crash zone sensor Supplemental front-impact air bag modules Front seat-mounted side-impact supplemental air bag modules Occupant classification sensors (weight sensors) 5. 6. 7.
. Until you have confirmed with your retailer that your passenger seat advanced air bag is working properly, position the occupants in the rear seating positions. This vehicle is equipped with the INFINITI Advanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regulations. It is also permitted in Canada. However, all of the information, cautions and warnings in this manual still apply and must be followed.
close to, or is against, the air bag module during inflation. of injury in an accident. The front air bags deflate quickly after a collision. Status light: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The front passenger air bag status light is located under the climate controls.
Front passenger air bag: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The front passenger air bag is designed to automatically turn OFF when the vehicle is operated under some conditions as described below as permitted by U.S. regulations. If the front passenger air bag is OFF, it will not inflate in a crash. The driver air bag and other air bags in your vehicle are not part of this system.
may or may not be illuminated, depending on the size of the child and the type of child restraint being used. If the passenger air bag status light is not illuminated (indicating that the air bag might inflate in a crash), it could be that the child restraint or seat belt is not being used properly. Make sure that the child restraint is installed properly, the seat belt is used properly and the occupant is positioned properly.
ment should also be done by an INFINITI retailer. The Supplemental Restraint System (SRS) wiring harnesses* should not be modified or disconnected. Unauthorized electrical test equipment and probing devices should not be used on the air bag system. material around the air bag system. . Removing or modifying the front passenger seat may affect the function of the air bag system and result in serious personal injury. .
The side air bags and curtain and rollover air bags are designed to inflate in higher severity side collisions, although they may inflate if the forces in another type of collision are similar to those of a higher severity side impact. They are designed to inflate on the side where the vehicle is impacted. They may not inflate in certain side collisions on the side where the vehicle is impacted.
. Do not make unauthorized changes to your vehicle’s electrical system, suspension system or side panel. This could affect proper operation of the side air bag and curtain and rollover air bag systems. . Tampering with the side air bag system may result in serious personal injury. For example, do not change the front seat by placing material near the seatback or by installing additional trim material, such as seat covers, around the side air bag. .
ing condition should get fresh air promptly. After pretensioner activation, load limiters allow the seat belt to release webbing (if necessary) to reduce forces against the chest. The supplemental air bag warning light is used to indicate malfunctions in the pretensioner system. (See “Supplemental air bag warning light” (P.1-51) for more details.) If the operation of the supplemental air bag warning light indicates there is a malfunction, have the system checked by an INFINITI retailer.
rollover air bag and pretensioner systems need servicing: . The supplemental air bag warning light remains on approximately 7 seconds after the ignition switch is pushed to the ON position. . The supplemental air bag warning light flashes intermittently. . The supplemental air bag warning light does not come on at all. Under these conditions, the front air bag, side air bags, and curtain and rollover air bags or pretensioner systems may not operate properly. They must be checked and repaired.
2 Instruments and controls Cockpit ................................................................ ... 2-3 Instrument panel ................................................. ... 2-5 Meters and gauges .............................................. ... 2-6 Speedometer and odometer ............................ ... 2-6 Tachometer...................................................... ... 2-7 Engine coolant temperature gauge .................. ... 2-8 Fuel gauge ..................................................
Storage ............................................................. ... Cup holders .................................................. ... Sunglasses holder ......................................... ... Glove box ...................................................... ... Console box .................................................. ... Card holder ................................................... ... Coat hooks .................................................... ... Cargo hooks (if so equipped) ......
COCKPIT GUID-786704CA-5415-49E0-B051-5131386B6540 6. 7. 8. 9. 9. 10. SIC4246 1. 2. 3. 4. Outside mirror remote control switch Intelligent Brake Assist (IBA) off switch (if so equipped) Instrument brightness control switch Headlight, fog light and turn signal switch 5. Steering-wheel-mounted controls (left side) — For audio system — For Bluetooth® Hands-Free Phone System (with navigation system) — For Bluetooth® Hands-Free Phone 11. 12. 13. 14. 15.
wheel lever (if so equipped) 16. Manual tilting/telescopic steering wheel lever (if so equipped) 17.
INSTRUMENT PANEL GUID-7F14A382-7F82-4651-BDC7-0E12FD740023 7. 8. 9. 10. 11. 12. 13. Clock Hazard warning flasher switch Front passenger supplemental air bag Hood release handle Fuse box cover Parking brake Steering wheel — Horn — Driver supplement air bag 14. Push-button ignition switch 15. Front passenger air bag status light 16. Rear window defroster switch 17. Power outlet 18. Automatic climate control system 19. Audio system 20.
METERS AND GAUGES GUID-94EC96EF-E97F-4313-B5C0-FA082DDC3327 SIC4277 Speedometer SPEEDOMETER AND ODOMETER GUID-1F7C808F-253F-4AD2-A903-E48E6C10EDCB Speedometer GUID-F273D4A6-E7A5-42CD-9CCD-740E3A14ACFB The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h). SIC3825 1. 2. 3. 4. 5. 2-6 Tachometer Warning/Indicator lights Speedometer Engine coolant temperature gauge Dot matrix liquid crystal display/ Odometer/twin trip odometer Instruments and controls 6.
TRIP A ? TRIP B ? TRIP A Resetting theGUID-D73A39BF-43C8-459F-9C24-47B7F579C407 trip odometer: 3 for Pushing the TRIP A/B RESET switch * more than 1 second resets the trip odometer to zero. Average fuel economy and distance to empty information is also available. (See “Dot matrix liquid crystal display” (P.2-21) and “How to use STATUS button” (P.4-9).
CAUTION SIC3255 ENGINE COOLANT TEMPERATURE GAUGE GUID-C761695C-D4AC-44B4-B7FE-BE6005727882 The gauge indicates the engine coolant temperature. The engine coolant temperature is within the normal range when the gauge needle 1 shown in the points within the zone * illustration. The engine coolant temperature varies with the outside air temperature and driving conditions. If the gauge indicates engine coolant temperature near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature.
COMPASS (if so equipped) GUID-3AF96F2F-5A12-46AE-8F89-742F0F1B456B as soon as it is convenient, preferably before the gauge reaches “E”. There will be a small reserve of fuel in the tank when the fuel gauge needle reaches “E”. The indicates that the fuel-filler door is located on the passenger’s side of the vehicle. needles will sweep in the speedometer and tachometer and the ring illumination will be brightened gradually. This function can be turned off. (See “Trip computer” (P.228).) CAUTION . .
km/h). You can also calibrate the compass by driving your vehicle on your everyday route. The compass will be calibrated once it has tracked 3 complete circles. To turn on and off the compass manually, A while the ignition push the switch * switch is in the ON position.
ZONE VARIATION CHANGE PROCEDURE GUID-0746FCA1-9280-483C-9034-D395D046BED8 The difference between magnetic north and geographical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Push the switch for more than 3 seconds. The current zone number will appear in the display. 2. Find your current location and variance number on the zone map.
WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS GUID-3B7E2B79-E712-41D2-976D-4E1B161E68FC All-Wheel Drive (AWD) warning light (AWD models)* Anti-lock Braking System (ABS) warning light Lane departure warning light (orange)* Front passenger air bag status light Low tire pressure warning light High beam indicator light Intelligent Brake Assist (IBA) off indicator light* Lane Departure Prevention (LDP) ON indicator light (green)* Master warning light Automatic transmission check warning light Preview Fu
WARNING LIGHTS GUID-CA89913F-D836-4B7B-A2FB-404499D455FD warning light turns off, you can drive again. All-Wheel Drive (AWD) warning light (AWD GUID-34B5C08F-9F8A-41FB-8888-5ADA4E0614B0 models) — blinks slowly (about once every 2 seconds): The warning light comes on when the ignition switch is pushed to ON. It turns off soon after the engine is started.
fluid is necessary, add fluid and have the system checked by your INFINITI retailer. (See “Brake fluid” (P.8-16).) 2. If the brake fluid level is correct, have the warning system checked by an INFINITI retailer.
“Engine oil” (P.8-11).) CAUTION Running the engine with the engine oil pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not covered by warranty. Turn off the engine as soon as it is safe to do so. Intelligent Cruise Control (ICC) system warning light (orange; if so equipped) GUID-8A8088B0-D52F-4F2D-9A30-A944A99D8FA4 This light comes on if there is a malfunction in the Intelligent Cruise Control (ICC) system.
SURE information will be displayed. The tire pressure for each tire will also be displayed. When the low tire pressure warning light illuminates, you should stop and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label. The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted.
CAUTION . The TPMS is not a substitute for the regular tire pressure check. Be sure to check the tire pressure regularly. . If the vehicle is being driven at speeds of less than 16 MPH (25 km/h), the TPMS may not operate correctly. . Be sure to install the specified size of tires to the four wheels correctly.
bag warning light will turn off after about 7 seconds if the front-impact air bag and side air bag, curtain air bag systems and/ or pretensioner seat belt are operational. and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a retailer as soon as possible.
further details. Exterior light indicator GUID-3005C741-A5D2-4EF8-A422-AD79F2FE5467 This indicator illuminates when the headlight switch is turned to the AUTO, or position and the front parking lights, instrument panel lights, tail lights, license plate lights or headlights are on. The indicator turns off when these lights are turned off.
light After a few driving trips, the should turn off if no other potential emission control system malfunction exists. If this indicator light remains on for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test. (See “Readiness for Inspection/Maintenance (I/M) test” (P.9-31).
DOT MATRIX LIQUID CRYSTAL DISPLAY GUID-4AAC9BC1-B5DF-469F-AE93-DBABD4F1A42A are not operating. Brake pad GUID-2DC328A4-A19B-422A-8771-C4024443E5BA wear warning AUDIBLE REMINDERS GUID-C0FA3258-142A-4A63-A081-BEA4082ED041 The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion. This scraping sound will first occur only when the brake pedal is depressed.
— “Driving the vehicle” (P.5-15). . Intelligent Cruise Control (ICC) system — “Intelligent Cruise Control (ICC) system (FULL SPEED RANGE)” (P.5-32). . Distance Control Assist (DCA) system — “Distance Control Assist (DCA) system” (P.5-54). . Intelligent Key system — “Intelligent Key system” (P.3-6). — “Push-button ignition switch” (P.511).
JVI0339X Instruments and controls 2-23
INDICATORSGUID-B3F3B2EB-3CA7-4B53-8052-3948B1F3352B FOR OPERATION 4. NO KEY warning GUID-E0AB1906-1D83-4E96-AA37-42D9B6691D10 1. Engine start operation indicator GUID-EB500815-1102-428E-9A0D-6F81FA5B2E69 This warning appears in either of the following conditions. This indicator appears when the selector lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed. 2.
9. Low fuel GUID-EA8889A1-61F8-403A-A526-34488D0E5188 warning 13. Loose fuel cap warning GUID-1C6C5584-0FBF-4D73-B1B2-8C015F279547 16. Cruise indicator (if so equipped) GUID-C331C5D0-489E-4070-87A0-6E00B2E1802A This warning appears when the fuel level in the tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty (E) position. This warning appears when the fuel-filler cap is not tightened correctly after the vehicle has been refueled.
INDICATORS FOR MAINTENANCE GUID-1E75CBB4-79E6-499A-AACC-03BBC065F39F played while the vehicle is controlled by the conventional (fixed speed) cruise control mode of the ICC system. (See “Intelligent Cruise Control (ICC) system (FULL SPEED RANGE)” (P.5-32).) 1. Engine oil replacement indicator GUID-4672A998-8264-469E-ABF9-AE792DD0A1F9 This indicator appears when the customer set time comes for changing the engine oil. You can set or reset the distance for changing the engine oil. (See “Trip computer” (P.
road conditions affect tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does not mean your tires will last that long. Use the tire replacement indicator as a guide only and always perform regular tire checks. Failure to perform regular tire checks, including tire pressure checks could result in tire failure. Serious vehicle damage could occur and may lead to a collision, which could result in serious personal injury or death. 4.
consumption and speed ? Elapsed time and trip odometer ? Distance to empty (dte) ? Outside air temperature (ICY) ? Setting ? Warning check at the same time.) 1. Current GUID-55CD9362-893F-4C68-BBFA-AB2E32D797BB fuel consumption 3. Elapsed time and trip odometer (mls or km)GUID-8B894318-664F-467D-872E-2C525C28B711 The current fuel consumption mode shows the current fuel consumption. 2.
actual fuel consumption. The display is updated every 30 seconds. The dte mode includes a low range warning feature. If the fuel level is low, the warning is displayed on the screen. When the fuel level drops even lower, the dte display will change to “——”. . If the amount of fuel added is small, the display just before the ignition switch is pushed to the OFF position may continue to be displayed. .
SECURITY SYSTEMS GUID-5DB214B2-69FC-4442-B1FB-75EA25141A3E . BACK Select this submenu to return to the top page of the setting mode. . LANGUAGE Select this submenu to choose language for display. . UNIT Select this submenu to choose the unit from MPG or l/100 km. . METER EFFECT Select this submenu to turn on and off the meter/ring illumination and needle sweep function when starting the engine. 7.
SIC2045 5. Confirm that the security indicator light comes on. The security indicator light stays on for about 30 seconds. The vehicle security system is now prearmed. After about 30 seconds the vehicle security system automatically shifts into the armed phase. The security light begins to flash once every approximately 3 seconds. If, during this 30-second pre-arm time period, the door is unlocked, or the ignition switch is pushed to ACC or ON, the system will not arm.
INFINITI VEHICLE IMMOBILIZER SYSTEM GUID-6E3959C6-6FF5-4CA8-81AC-A7E8C959A5CE cause undesired operation of the device. The INFINITI Vehicle Immobilizer System will not allow the engine to start without the use of the registered Intelligent Key. Never leave these keys in the vehicle. FCC Notice: For USA: This device complies with Part 15 of the FCC Rules.
WINDSHIELD WIPER AND WASHER SWITCH GUID-12D5611F-AF2C-4D02-931F-68228D85405E If the light still remains on and/or the engine will not start, see an INFINITI retailer for INFINITI Vehicle Immobilizer System service as soon as possible. Please bring all Intelligent Keys that you have when visiting an INFINITI retailer for service. WARNING In freezing temperatures the washer solution may freeze on the window and obscure your vision which may lead to an accident.
WINDSHIELD WIPER AND WASHER OPERATIONGUID-1CFF399F-D2ED-4A98-8171-56A0C8B75D99 The windshield wiper and washer operates when the ignition switch is in the ON position. SIC3626 Type A SIC4492 Type B 2-34 Instruments and controls Push the lever down to operate the wiper at the following speed: 1 Intermittent — intermittent operation * The intermittent operation can be adjusted by turning the knob toward A B (Slower) or * (Faster) (if so * equipped).
adjusted by turning the knob toward the 2 3 front * (High) or toward the rear * (Low). . High — High sensitive operation . Low — Low sensitive operation To turn the rain-sensing auto wiper system off, push up the lever to the OFF position, or pull down the lever to the LO or HI position. CAUTION SIC4258 . Do not touch the rain sensor and around it when the wiper switch is in the AUTO position and the ignition switch is in the ON position.
REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH GUID-23B70835-37EA-4EFC-9B44-94B7D7487BE3 REAR WINDOW WIPER AND WASHER OPERATIONGUID-330441CC-6FCB-4178-A695-A658CFAFD0F9 If the rear window wiper operation is interrupted by snow etc., the wiper may stop moving to protect its motor. If this occurs, turn the wiper switch to OFF and remove the snow etc. on and around the wiper arms. After about 1 minute, turn the switch ON again to operate the wiper.
HEADLIGHT AND TURN SIGNAL SWITCH GUID-AAE3047B-0510-4871-B95C-8E645802C232 XENON HEADLIGHTS GUID-2C34F8A3-9AD6-4D30-991D-BEF904D3F050 WARNING HIGH VOLTAGE . When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at an INFINITI retailer. . Xenon headlights provide considerably more light than conventional headlights.
The autolight system can turn on the headlights automatically when it is dark and turn off the headlights when it is light. If the ignition switch is pushed to the OFF position and one of the doors is opened and this condition is continued, the headlights remain on for a specified period of time. SIC3268 Autolight system GUID-2ED3057E-F02A-4E5A-9456-69FF03ABE35C The autolight system allows the headlights to be set so they turn on and off automatically. To set the autolight system: 1.
Battery saver system GUID-2697CA72-C2E4-4E8F-A093-1D2ACD8835B1 For automatic headlights off delay setting, see “Comfort settings” (P.4-20). A chime will sound when the driver side door is opened with the light switch in the or position and the ignition switch in the ACC, OFF or LOCK position.
. flat road, select position 0. Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically. WARNING SIC2275 Headlight aiming control (if so equipped) GUID-980E128C-206E-49A3-8E40-A7785E7ED87C Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired.
running lights illuminate once the parking brake is released. The daytime running lights will remain on until the ignition switch is pushed to the OFF position. WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.
to the − side. When reaching the minimum brightness, “MIN” appears on the display 3 . However, “MIN” does not appear * during the nighttime. The dot matrix liquid crystal display returns to the normal display under the following conditions: SIC3830 . when the instrument brightness control switch is not operated for more than 5 seconds. . when the or switch on the right side of the combination meter panel is pushed.
HORN HEATED SEATS (if so equipped) GUID-968A83E9-A8C5-453D-88B2-4441E889A01A GUID-00DFCACE-2206-4FDD-877E-00B1DA043944 WARNING Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have an inability to feel pain in body parts that contact the seat. Use of the seat heater by such people could result in serious injury.
. 3 . Make sure that to the OFF position * the indicator light turns off. Any liquid spilled on the heated seat should be removed immediately with a dry cloth. . When cleaning the seat, never use gasoline, thinner, or any similar materials. . If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system checked by an INFINITI retailer. The heater is controlled by a thermistor, automatically turning the heater on and off.
CLIMATE CONTROLLED SEATS (if so equipped) GUID-BD684AC9-DBD2-48B2-9F6C-A381DF2E81D5 remains on low speed for approximately 60 seconds after turning the switch on or selecting the desired temperature. 4. When the vehicle’s interior is warmed or cooled, and/or before you leave the vehicle, be sure to turn the control knob to the OFF position (center). The B on the control knob indicator light * goes off at the OFF position.
WARNING SYSTEMS SWITCH (if so equipped) GUID-69520B0F-8E6D-49B3-BB99-A8A7C9D2E6D9 the vehicle is traveling close to the vehicle ahead. (See “Forward Collision Warning (FCW) system” (P.5-67).) turn the switch off and have the system checked by an INFINITI retailer. The warning systems switch is automatically turned on when the engine is started, 1 and the warning systems ON indicator * on the switch illuminates. To cancel the warning systems, push the warning systems switch to turn off the system.
SNOW MODE SWITCH GUID-B4FC340E-572F-4017-AB0F-18864F086100 CONTINUOUS DAMPING CONTROL MODE SELECT SWITCH (if so equipped) GUID-3A70661A-85E6-42C5-972D-9CBD43DA4B06 AUTO MODE GUID-706CBD66-BBA8-4870-AE78-7DC376B28461 Push the switch to the AUTO position for a smooth ride. A * SPORT MODE GUID-CCD01BAE-D5C1-4A63-BF3B-32EC37716FBC B Push the switch to the SPORT position * when you desire a quick response all the time. The SPORT mode indicator light will illuminate.
INTELLIGENT BRAKE ASSIST (IBA) OFF SWITCH (if so equipped) GUID-737068A6-79F1-4242-A5D8-DD8B33CBC7DE VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH GUID-0E75EF3A-E6E0-4B47-9774-CB5CF10EBEA4 the engine to turn on the system. (See “Vehicle Dynamic Control (VDC) system” (P.5-83).) SIC3844 JVS0033X The vehicle should be driven with the Intelligent Brake Assist (IBA) system on for most driving conditions. The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions.
CLOCK POWER OUTLET GUID-BB3EAA65-63CC-4F32-9A1D-5C8D3DCEDC45 GUID-0D47D8B1-75C2-462A-AE78-C31F77B07718 SIC3325 If the power supply is disconnected, the clock will not indicate the correct time. Readjust the time. SIC3835 SIC3631 Rear console Front ADJUSTING GUID-74DEF1C7-F832-4803-9312-6291A6683AFA THE TIME 1. To set the clock forward, push the 1 . button * 2. To set the clock backward, push the 2 . button * 3. To move forward or backward faster, push and hold the button more than 5 seconds.
STORAGE GUID-8EEEA6B4-CDF3-4FBB-B8B5-B29FAB461BC4 The power outlet is used for powering electrical accessories such as cellular telephones. CAUTION . The outlet and plug may be hot during or immediately after use. . Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. . Use power outlet with the engine running to avoid discharging the vehicle battery. .
SIC3118 Front To open the cup holder, push the lid 1 . * The flap will be folded down when inserting a large container. To close, lower the cup holder lid and push it down lightly. To clean the front cup holder, pull up the 2 and remove it. inside tray * The cup holder is not designed to store personal effects. SIC3246 SIC3837 Rear The cup holders for rear passengers are located on the rear center armrest.
. Do not leave glasses in the sunglasses holder while parking in direct sunlight. The heat may damage the glasses. SIC3838 GLOVE BOXGUID-E830851B-9B72-4851-862E-E49D0F8A1F76 WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. To open the glove box, pull the handle 1 . * To close, push the lid in until the lock latches. 2 /unlock * 3 the glove box, use To lock * the mechanical key. For the mechanical key usage, see “Keys” (P.3-2).
SIC3840 SIC3839 Front CONSOLE BOX GUID-2C46B8EF-112D-4A24-8DD9-A5076B9AE729 Front GUID-7C361A46-BF70-4DB1-BF9F-5A133A5A63E6 A (front passenger’s seat When the lever * side) is pulled, the upper case is available for storing some small items. When the B (driver’s seat side) is pulled, the lever * bottom case is available for storing some larger ones. Rear GUID-0A5AA4FA-91C3-4C9E-9569-64B962ECDD48 To open the lid, push the button pull up the lid.
SIC3663 CARD HOLDER GUID-97E6647C-8807-49DC-AE40-3C99461021B5 1 and slide a card Pull the sun visor down * A . in the card holder * SIC3248 COAT HOOKS GUID-025674FB-C7C6-4974-9A2C-ACBAA5885EC5 The coat hooks are equipped beside the rear personal lights. CAUTION Do not place items which are more than 2 lb (1 kg) on the hook. 2-54 Instruments and controls SIC3849 CARGO HOOKS (if so equipped) GUID-96EA5D34-5C09-4FA4-AE6D-9E194BEEC79A WARNING . Always make sure that the cargo is properly secured.
. CAUTION Do not apply a total load of more than 22 lb (10 kg) to a single hook. Be sure to secure all four hooks into the retainers. The cargo restrained in the net must not exceed 30 lb (13.6 kg) or the net may not stay secured. SIC3850 CARGO NETGUID-8A451884-6108-427F-B920-2C513E2E942C (if so equipped) The cargo net helps keep packages in the cargo area from moving around while your vehicle is driven. To install the cargo net, attach the hooks to the retainers. WARNING .
To remove the cargo cover, 1. Return the rear seatback to the full upright position. 2. Fold the flap 1 . * 3. Lift up the rear side of the cargo cover 2 to unlatch the rear side of the cargo * A from the hanger bars. cover * 4. Then, tilt up the cargo cover and 3 to unhook slightly slide it forward * B the front side of the cargo cover * from the hanger bars. 5. Incline the cargo cover above the hanger bars towards the front of the 4 and lower the cargo cover.
holder. . . If the cargo cover contacts the top tether strap when it is attached to the top tether anchor, remove the cargo cover from the vehicle or secure it on the cargo floor below its attachment location. If the cargo cover is not removed, it may damage the top tether strap during a collision. Your child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged. .
driver’s door pillar). For more information regarding GVWR and GAWR, see “Vehicle loading information” (P.9-15). WARNING SIC3845 . Drive extra carefully when the vehicle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack. . Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sudden or unusual handling maneuvers. . Roof rack load should be evenly distributed. .
WINDOWS GUID-F2B513F0-C5CA-4602-990F-EB320D693D5A POWER WINDOWS GUID-6BC632B6-9662-4E86-B386-6BD43E9ADE31 Locking passengers’ windows GUID-119E3EBA-1712-456B-B5FC-314E60575911 C is pushed in, only When the lock button * the driver side window can be opened or closed. Push it in again to cancel. WARNING . Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows.
Auto reverse function GUID-F3457513-D4E9-4D42-8FC6-81FE07ABE22F WARNING There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window. SIC3241 Passenger side power window switch GUID-B51E7521-24F7-4258-90F3-91DEADADEE74 The passenger side switch will open or close only the corresponding window. To open or close the window, push down or pull up the switch and hold it.
MOONROOF GUID-614EBDFD-6558-4707-B43E-D90728735967 If the windows do not close automatically GUID-BEB4F124-A4F8-4D29-BAB0-A1F127A5F338 If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. WARNING . In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints. .
moonroof switch and release it; it need not be held. The roof will automatically open or close all the way. To stop the roof, push the switch once more while it is opening or closing. Auto reverseGUID-F72E8E14-12B4-49C6-86B1-0F1839FF9097 function WARNING SIC3243 Sunshade GUID-654A9C45-DBB8-4D8E-877C-EE7D24836BA2 The sunshade will open automatically when the moonroof is opened. However, it must be closed manually.
WELCOME LIGHT INTERIOR LIGHTS GUID-AE67C9A9-471A-40D6-B204-7FAAE38B3994 GUID-6FD80748-9586-4C48-AB1E-B9A2EC82667D approach the vehicle with the Intelligent Key (within approximately 3.3 feet (1 m) of the antenna built inside the door handles) and the following conditions are met. . All doors are closed and locked. . The ignition switch is in the LOCK or OFF position. . The Intelligent Key is outside the vehicle. . The puddle light operates within a set duration.
SIC3250 SIC3251 PERSONAL GUID-0C0F640C-E28C-4C80-A359-ED9156EF8799 LIGHTS INTERIOR LIGHT CONTROL SWITCH GUID-5472874C-63B7-4BAB-B073-477FF060309D Rear The interior light control switch has three positions: ON, DOOR and OFF. GUID-DE748F3D-E993-465D-8864-C0F70AE4E8D1 Push the button as illustrated to turn the light on or off. ON position GUID-04C519DC-B063-4C85-BC2F-4C69DEC80F98 1 When the switch is in the ON position * the map lights and rear personal lights will illuminate.
VANITY MIRROR LIGHTS CARGO LIGHT GUID-EA8F0FF8-ECD8-4ABD-96D8-9478339E89CB GUID-393CF4A3-A8FF-45FD-9DF7-2C6830877CC8 OFF position GUID-0848C0A2-C26A-4618-85A5-C154CB2100FD 3 , When the switch is in the OFF position * the lights will not illuminate, regardless of the condition. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. SIC3869 The light on the vanity mirror will turn on when the cover on the vanity mirror is opened.
HomeLink® UNIVERSAL TRANSCEIVER GUID-250D58C4-A60D-4350-82C0-40723C71E6FC The HomeLink® Universal Transceiver provides a convenient way to consolidate the functions of up to three individual handheld transmitters into one built-in device. features as required by federal safety standards. (These standards became effective for opener models manufactured after April 1, 1982).
customers and gate openers” (P.2-68). JVI0428X 2. Using both hands, simultaneously press and hold the desired HomeLink® button and handheld transmitter button. DO NOT release until the ® 1 HomeLink indicator light * flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released. (The rapid flashing indicates successful programming.
stand on your vehicle to perform the next steps. HomeLink® web site at: www. homelink.com or call 1-800-355-3515. 4. At the receiver located on the garage door opener motor in the garage, locate the “learn” or “smart” button (the name and color of the button may vary by manufacturer but it is usually located near where the hanging antenna wire is attached to the unit). If there is difficulty locating the button, reference the garage door opener’s manual.
mitted. For convenience, the hand-held transmitter of the device may also be used at any time. PROGRAMMING TROUBLESHOOTING GUID-0C0B41AE-D602-46C7-AA98-C2CB74E99831 If the HomeLink® does not quickly learn the hand-held transmitter information: . replace the hand-held transmitter batteries with new batteries. . position the hand-held transmitter with its battery area facing away from the HomeLink® surface. . press and hold both the HomeLink® and hand-held transmitter buttons without interruption. .
FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
3 Pre-driving checks and adjustments Keys .................................................................... ... 3-2 Intelligent Key ................................................. ... 3-2 Valet hand-off.................................................. ... 3-3 Doors .................................................................. ... 3-4 Locking with mechanical key ........................... ... 3-4 Opening and closing windows with the mechanical key................................................ .
KEYS GUID-94E843C0-8427-4D89-B6DF-18D25D089B3C A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see an INFINITI retailer for duplicates by using the key number. INFINITI does not record any key numbers so it is very important to keep track of your key number plate. INFINITI Vehicle Immobilizer System of your vehicle.
— Do not change or modify the Intelligent Key. CAUTION — Do not use a magnet key holder. Always carry the mechanical key installed in the Intelligent Key. — Do not place the Intelligent Key near an electric appliance such as a television set or personal computer. VALET HAND-OFF GUID-A722005A-6639-4D5F-B67D-EDDC260A1F06 — Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the system function. .
DOORS GUID-42F0E4A6-FA32-4223-BC12-35C12246924D . You can switch the lock system to the mode that allows you to open all the doors when the key is turned once. (See “How to use SETTING button” (P.415).) WARNING . Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle.
Lockout protection GUID-600B95AC-F681-4E58-9CF3-84550796266B When the power door lock switch (driver or front passenger) is moved to the lock position with the Intelligent Key in the port and any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle (not in the Intelligent Key port) and any door open, all doors will unlock automatically and a chime will sound after the door is closed.
INTELLIGENT KEY SYSTEM GUID-FE158A8C-9076-41F0-869D-CF4E0A33487A 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more than 5 seconds. WARNING . Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use. . The Intelligent Key transmits radio waves when the buttons are pushed.
CAUTION . Be sure to carry the Intelligent Key with you when operating the vehicle. . Never leave the Intelligent Key in the vehicle when you leave the vehicle. The Intelligent Key is always communicating with the vehicle as it receives radio waves. The Intelligent Key system transmits weak radio waves. Environmental conditions may interfere with the operation of the Intelligent Key system under the following operating conditions. .
. Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers. If an Intelligent Key is lost or stolen, INFINITI recommends erasing the ID code of that Intelligent Key from the vehicle. This may prevent the unauthorized use of the Intelligent Key to operate the vehicle. For information regarding the erasing procedure, contact an INFINITI retailer.
you carry the key with you and then lock the doors. . Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. . The Intelligent Key system (opening/ closing doors with the door handle request switch) can be set to remain inactive. (See “Vehicle information and settings” (P.4-9).) SPA2326 DOOR LOCKS/UNLOCKS PRECAUTION GUID-B00D3208-6D21-48F7-BDBA-06C2F22EF1B8 .
When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch A or the lift (driver’s or front passenger’s) * B within the range of gate request switch * operation. When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” (P.3-16). SPA2779 or ON position.
Lockout protection: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 To prevent the Intelligent Key from being accidentally locked in the vehicle, lockout protection is equipped with the Intelligent Key system. When the driver’s side door is open, the doors are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automatically unlock and the door buzzer sounds.
switch on the instrument panel or lower part of the lift gate. See “Lift gate” (P.3-18). BATTERY SAVER SYSTEM GUID-786D2EEA-5854-4E6B-9C0A-3296C3FF1B0A When all the following conditions are met for a period of time, the battery saver system will cut off the power supply to prevent battery discharge. . The ignition switch is in the ACC position, and . All doors are closed, and . The selector lever is in the P (Park) position.
TROUBLESHOOTING GUIDE GUID-71D02555-16BF-4091-AA2F-FBA43C0FB588 Symptom Possible cause Action to take The SHIFT P warning appears on the display When pushing the ignition switch and the inside warning chime sounds conto stop the engine tinuously or for a few seconds. The selector lever is not in the P (Park) position. Shift the selector lever to the P (Park) position. When shifting the selector lever to the P (Park) position. The ignition switch is in the ACC or ON position.
REMOTE KEYLESS ENTRY SYSTEM GUID-DE778BCF-B99A-4DA7-94C5-DF2F772B0219 WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight.
Locking doors and fuel-filler door GUID-69AC6A3D-261B-4C88-9BC9-DD3A27C88837 1. Move the selector lever to the P (Park) position, push the ignition switch to the OFF position and make sure you carry the Intelligent Key with you.* 2. Close all the doors and the lift gate. 3. Push the LOCK Intelligent Key. button 1 * on the 4. All the doors, the lift gate and fuel-filler door will lock. 5. The hazard indicator flashes twice and the horn chirps once.
be operated when the ignition switch is in the ON position. If horns are not necessary, the system can be switched to the hazard indicator mode. Using panicGUID-9452550C-005D-4C29-9F19-31ED802F61C3 alarm In hazard indicator mode, when the LOCK button is pushed, the hazard indicator flashes twice. When the UNLOCK button is pushed, neither the hazard indicator nor the horn operates. If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 4 on the 1.
Hazard indicator and horn mode: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 DOOR LOCK Intelligent Key system (Using door handle or lift gate request switch) Remote keyless entry system (Using , or button) DOOR UNLOCK HAZARD - twice OUTSIDE CHIME - twice HAZARD - once OUTSIDE CHIME - once HAZARD - twice HORN - once HAZARD - once HORN - none Hazard indicator mode: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 DOOR LOCK Intelligent Key system (Using door handle or lift gate request switch) Remote keyless ent
HOOD LIFT GATE GUID-EC94A04A-3559-4474-821D-9E1BE1DBE3F1 GUID-FE000314-D7F0-4AD6-AF71-5B82F75F04B0 WARNING . Always be sure the lift gate has been closed securely to prevent it from opening while driving. . Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Exhaust gas (carbon monoxide)” (P.5-3) of this manual. . Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls.
OPERATING GUID-35B29182-0FF6-42A9-B62E-4541B5E1C075 POWER LIFT GATE To operate the power lift gate, the selector lever must be in the P (Park) position. The power lift gate will not operate if the battery voltage is under approximately 11V. SPA2547 Power lift gate main switch GUID-FE0D0D13-F8D5-41FC-9FEC-CE57F3DA2CD9 SPA2843 Power lift gate switch — Instrument panel The power lift gate operation can be turned on or off by the power lift gate main switch on the instrument panel.
Power openGUID-93B776BA-7F85-429E-AC0F-D7C96F88027B When the lift gate is fully closed, the lift gate will fully open automatically by performing one of the following operations: SPA2463 Power lift gate button — Intelligent Key A . Pushing the power lift gate switch * on the instrument panel. B . . Pushing the lift gate opener switch * C . Pushing the power lift gate button * on the Intelligent Key for more than 1 second.
the ignition switch is in the ON position. Auto reverse function GUID-EC8F1C01-9FE1-4B41-9A22-0A678FDFA5A1 The auto-reverse function enables the lift gate to automatically reverse when something is caught in the lift gate as it is opening or closing. When the control unit detects an obstacle, the lift gate will reverse and return to the full open or full close position. Make sure that all passengers keep their hands, etc., clear from the lift gate opening before closing the lift gate.
3. Push lift gate opener switch again. The lift gate will stop at user selected position when lift gate is opening or closing. 4. The lift gate will fully open when the lift 1 gate opener switch * is pressed again. 5. The lift gate will fully close when the lift 2 on the lower part of the gate switch * lift gate is pressed.
function. However, this may result in minor personal injury if someone is behind the vehicle when the switch is activated, or damage to the lift gate. NOTE: . To avoid damaging the lift gate system, do not manually force the lift gate to open or close when the lift gate is moving. When manually operating the lift gate from the full close or full open position, do not use excessive force. Using excessive force may damage the system. . Do not install accessories such as bike racks onto the lift gate.
FUEL-FILLER DOOR GUID-43AE9E8E-F3CD-48F7-8AD7-53E32AEE6BB1 . Insert the mechanical key into the door lock cylinder and turn it to the rear of the vehicle. . Push the power door lock switch to the UNLOCK position. To lock, close the fuel-filler door securely and lock all doors by operating the door handle request switch, the LOCK button on the Intelligent Key, the mechanical key or the power door lock switch.
built-in safety valve needed for proper operation of the fuel system and emission control system. An incorrect cap can result in a serious malfunction and possible injury. It could also cause the malfunction indicator light to come on. . Never pour fuel into the throttle body to attempt to start your vehicle. . Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer.
A on the right 3. Push the reset switch * side of the combination meter for about 1 second to turn off the LOOSE FUEL CAP warning after tightening the fuel cap. SPA2524 To remove the fuel-filler cap: 1. Turn the fuel-filler cap counterclockwise to remove. 2. Put the fuel-filler cap on the cap holder A while refueling. * To install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuel-filler tube. 2. Turn the fuel-filler cap clockwise until a single click is heard.
TILT/TELESCOPIC STEERING GUID-95892D7A-9426-4BF3-9790-B203F407E3FE WARNING . Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident. . Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort. The driver’s air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways or out of position in any way, you are at greater risk of injury or death in a crash.
SUN VISORS GUID-0E6A7B36-6F14-49B7-8E47-FADFD89E0563 2. To block glare from the side, remove the main sun visor from the center mount and swing the visor to the side 2 . * For more information, see “Automatic drive positioner” (P.3-32). 3. Slide the sun visor needed. SPA2471 1. To block glare from the front, swing 1 .
MIRRORS GUID-7EA98A31-E7A3-4913-AD21-96E01843E14F Automatic anti-glare type GUID-03C3FC21-1717-4122-B190-E80C6E9E78DE The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position.
For the HomeLink® Universal Transceiver operation, see “HomeLink ® Universal Transceiver” (P.2-66). Adjusting outside mirrors GUID-173800D2-EA0E-45DA-A1C3-3B5C444AAE84 The outside mirror control switch is located at the lower part of the instrument panel. The outside mirror will operate only when the ignition switch is in the ACC or ON position. 1 2 Move the switch right * or left * to select the right or left side mirror, then 3 using the control switch.
them again electrically before driving. The outside rearview mirror remote control operates when the ignition switch is in the “ACC” or “ON” position. To fold the outside rearview mirrors, push the outside rearview mirror folding switch 1 . To unfold, to the “CLOSE” position * 2 . push to the “OPEN” position * SPA1732A Foldable outside mirrors GUID-6304F622-C60E-4C4E-AD43-2AD64F0E8BCF CAUTION . Do not touch the mirrors while they are moving. Your hand may be pinched, and the mirror may malfunction. .
AUTOMATIC DRIVE POSITIONER (if so equipped) GUID-5D3DB23B-FAEA-453A-AE25-5951BD40B382 The automatic drive positioner system has three features: . Entry/exit function . Seat synchronization function . Memory storage ENTRY/EXITGUID-263AEFC2-F492-458F-9233-42DCA35945C7 FUNCTION SIC3869 VANITY MIRROR GUID-3780BCDB-5920-42A8-A7E5-61F0F7698B59 To use the front vanity mirror, pull down the sun visor and pull up the cover.
Initialize entry/exit function GUID-CF566402-5592-4485-AD8B-9C26CE39C0D0 The seat synchronization function operates under the following conditions: If the battery cable is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before. In such a case, after connecting the battery or replacing with a new fuse, open and close the driver’s door more than two times after the ignition switch is turned from the ON position to the LOCK position.
holding the SET switch for more than 10 seconds while the ignition switch is in the ACC position. The indicator lights on the memory switches (1 and 2) will blink once when the function is canceled, and the indicator lights will blink twice when the function is activated. Note that the indicator lights may illuminate after 5 seconds while holding the SET switch. This indicates readiness for linking the Intelligent Key to a stored memory position.
Selecting the memorized position GUID-2FEA9244-0775-4478-9531-20E8C2DBBEC5 1. Move the selector lever to the P (Park) position. 2. Use one of the following methods to move the driver’s seat, the outside mirrors and the steering wheel. . Push the ignition switch to the ON position and push the memory switch (1 or 2) fully for at least 1 second. . Within 45 seconds of opening the driver’s door, push the memory switch (1 or 2) fully for at least 1 second.
MEMO 3-36 Pre-driving checks and adjustments
4 Monitor, climate, audio, phone and voice recognition systems Safety note .......................................................... ... 4-3 Center multi-function control panel ...................... ... 4-3 How to use INFINITI controller.......................... ... 4-5 How to use touch screen (models with navigation system) .......................................... ... 4-5 Menu options (models with navigation system) .......................................... ... 4-7 How to select menus on the screen .
CD/DVD/USB memory care and cleaning ....... ... 4-90 Steering-wheel-mounted controls for audio.... ... 4-91 Antenna ........................................................ ... 4-92 Car phone or CB radio ....................................... ... 4-93 Bluetooth® Hands-Free Phone System (models with navigation system)........................ ... 4-94 Regulatory information .................................. ... 4-95 Voice commands ........................................... ... 4-95 Control buttons ........
SAFETY NOTE CENTER MULTI-FUNCTION CONTROL PANEL GUID-BF01B3FB-964A-4D69-9FDE-7AD7A547038E GUID-6CACAD55-F243-4D7E-9CE2-A0E27940A9E4 WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. .
SAA1524 Models without navigation system 1. “AUX” button (P.4-54) If you use the system with the engine not 2. “RADIO AM·FM” band selector button running (ignition ON or ACC) for a long (P.4-54) time, it will use up all the battery power, and the engine will not start. 3. INFINITI controller (P.4-5) 4. “ OFF” brightness control and display ON/OFF button (P.4-9) 5. “INFO” vehicle information button (P.4-9) 6. “DISC” selector button (P.4-54) 7. “STATUS” status display button (P.4-9) 8. “SETTING” button (P.
HOW TO USE INFINITI CONTROLLER GUID-6837BE8C-F9DA-48E4-B182-4FB0EA348AE5 Choose an item on the display using the 2 (or additional main directional buttons * 6 models with navidirectional buttons * 3 , and push gation system) or center dial * 1 for operation. the ENTER button * 4 before the If you push the BACK button * setup is completed, the setup will be canceled and/or the display will return to the previous screen. This button can also be used to delete characters that have been input.
SAA2473 Example Touch screen operation GUID-2D242F95-D6A4-4173-9153-286308D4DDDB With this system, the same operations as those for the INFINITI controller are possible using the touch screen operation. Selecting theGUID-D73A39BF-43C8-459F-9C24-47B7F579C407 item: Touch an item to select it. To select the “Audio” settings, touch the “Audio” area 1 on the screen. * SAA2474 Example Adjusting an GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 item: 1 or − * 2 button to adjust Touch the + * the settings.
. Delete: Deletes the last character that has been input with one touch. Push and hold the button to delete all of the characters. . OK: Completes character inputs. Touch screen maintenance GUID-AC92A1AA-5F9B-4121-ADE4-61BD97D61473 If you clean the display screen, use a dry, soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or detergent. Dampen the cloth first, and then wipe the screen.
HOW TO SELECT MENUS ON THE SCREEN GUID-AA4D7312-EEA8-4B34-94A3-5187625DBB9E Vehicle functions are viewed on the display screen in menus. To select each key item, highlight the preferred item using the INFINITI controller and push the ENTER button. Whenever a menu selection is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details. SAA2477 Models with navigation system 1. Header: Shows the path used to get to the current screen.
VEHICLE INFORMATION AND SETTINGS GUID-045F576B-8C5C-48C7-9686-4E43E7F36A01 HOW TO USE STATUS BUTTON GUID-FC579136-5898-4FA8-800F-01E110DC09EF You can check information related to the audio, climate control system, fuel consumption and navigation system (if so equipped) by pressing the STATUS button repeatedly.
Vehicle information display GUID-24CF37C9-3DF2-46E7-BB0D-F09593646A3F 1. Push the INFO button on the control panel. 2. Select an item from the INFO menu. 3. After viewing or adjusting the information on the following screens, push the BACK button to return to the INFO menu. See the separate Navigation System Owner’s Manual for the following items: . . . . .
TIRE PRESSURE information GUID-CF46107C-599A-4D58-858B-D3DD48166CF4 Fuel Economy information GUID-57037A3E-D138-4A88-B1B9-AF4F7EB7B3F0 The approximate distance to empty, average fuel economy and current fuel economy will be displayed for reference. WARNING To reset the average fuel economy (Avg Fuel Econ), select the “Reset Fuel Eco” or “Reset” key.
the “Select Units” key (models with navigation system) with the INFINITI controller and push the ENTER button. In case of low tire pressure, LOW PRESSURE information will be displayed on the screen. Check the pressure of all tires. Tire pressure rises and falls depending on the heat caused by the vehicle’s traveling condition and the temperature. After tire rotation is performed, tire pressure will not be displayed in the actual tire position.
Maintenance information GUID-52717FA3-EE30-48ED-B71F-0859F9F079C0 button” (P.4-15).) The maintenance intervals can be displayed for the engine oil, oil filter, tire and other reminders. To set a maintenance interval, select a preferred item from the list. You can also set to display a message to remind you that the maintenance needs to be performed. The following example shows how to set the engine oil maintenance information. Use the same steps to set the other maintenance information. SAA3003 1.
GPS Position:GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 For the details of this item, see the separate Navigation System Owner’s Manual. Voice Recognition: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 For the details of this item, see “INFINITI Voice Recognition System (models with navigation system)” (P.4-119).
HOW TO USE SETTING BUTTON GUID-21D2D825-C781-4D7A-802D-5DBBC611FDD4 Audio settings GUID-59211225-C397-4F93-903A-3EAE007978A0 The display as illustrated will appear when the SETTING button is pushed. The display as illustrated will appear when pushing the SETTING button and selecting the “Audio” key. Designs and items displayed on the screen may vary depending on the models.
played. For some music, it may be difficult to realize the effect of this feature. (models with navigation system)” (P.4-94). DivX® Registration Code (models with navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The registration code for a device that is used to download DivX® files will be displayed on the screen. If a disc is loaded or a USB memory is connected to the audio system, this function will not be activated.
Guidance Volume: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 To adjust the guidance voice volume, select the “Guidance Volume” and adjust it with the INFINITI controller. You can also adjust the guidance voice volume by turning the VOLUME control knob while voice guidance is being announced. Ringtone/Incoming Call/Outgoing Call: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 For the details of these items, see “Bluetooth® Hands-Free Phone System (models with navigation system)” (P.4-94).
To turn on the screen, set this item to the “ON” position or push the “ OFF” button. When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5 seconds after the operation is finished.
This clock will indicate the time almost exactly because it is always adjusted by the GPS system (models with navigation system). Clock Format GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 (24h): When this item is turned to ON, the 24hour clock is displayed. When this item is not turned to ON, the 12-hour clock is displayed.
SAA2489 SAA2488 Example Models with navigation system Others settings (models with navigation system) GUID-D4DB2F44-35D0-4833-B384-106AB311A866 Comfort settings GUID-D2700228-D394-4197-AB85-F1FE23BD05F5 The Others settings display will appear when pushing the SETTING button and selecting the “Others” key. The following items are available: . . . . . .
Lift Steering Wheel on Exit (if so equipped): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When this item is turned on, the steering wheel moves upward for easy exit if the ignition switch is in the LOCK position and the driver’s door is opened. After getting into the vehicle and pushing the ignition switch to the ACC position, the steering wheel moves to the previous position.
Select Units: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Select the “Select Units” key. Choose “US” (Mile, 8F, MPG) or “Metric” (km, 8C, L/100 km) for your favorite display appearance. Select Units (Tire Pressure): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Choose the “Select Units (Tire Pressure)” key and push the ENTER button. From the following display, select “kPa” or “psi”. *When the ignition switch is in the ACC position, the “Select Units (Tire Pressure)” key is not displayed.
file. stop the vehicle in a safe location and apply the parking brake. . (Previous) Select the “ ” key to display the previous file. Setting the Image Viewer: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The Image Viewer setting display will appear when selecting the “Settings” key on the full screen display. The following settings are available for the full screen display.
REARVIEW MONITOR (models without navigation system) GUID-DE353CB5-DE54-4EC4-8FC7-9C5E78A69C7D — Maximum Resolution: 2048 6 1536 pixels — Maximum Size: 2-MB — Colors: 32768 (15-bit) — Maximum File Name lengths: 253Bytes — Maximum Folders: 500 — Maximum Images per Folder: 1024 . If an electronic device (such as a digital camera) is directly connected to the vehicle using a USB cable, no image will be displayed on the screen. . If the file name is too long, some file names may not be entirely displayed. .
up. Predictive course lines 6 : * Indicate the predictive course when backing up. The predictive course lines will be displayed on the monitor when the selector lever is in the R (Reverse) position and the steering wheel is turned. The predictive course lines will move depending on how much the steering wheel is turned and will not be displayed while the steering wheel is in the neutral position.
the selector lever is moved to the R (Reverse) position. SAA1897 HOW TO PARK WITH PREDICTIVE COURSE LINES GUID-59AAF71A-D98A-484D-9CC4-31B90C68404B 1. Visually check that the parking space is safe before parking your vehicle. 2. The rearview of the vehicle is displayed A as illustrated when on the screen * 4-26 Monitor, climate, audio, phone and voice recognition systems SAA1898 3. Slowly back up the vehicle adjusting the steering wheel so that the predicB enter the parking tive course lines * C .
guide lines C . space * D * actual distance. For example, the display A , but the shows 3 ft (1 m) to the place * actual 3 ft (1 m) distance on the hill is the B . Note that any object on the hill is place * further than it appears on the monitor. parallel to the parking 5. When the vehicle is parked in the space completely, move the selector lever to the “P” (Park) position and apply the parking brake.
B . Note that any object on is the place * the hill is closer than it appears on the monitor. SAA1979 Backing upGUID-8C5A07EB-1FF9-4681-8CA9-B5329E4077F2 on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown further than the actual distance.
may hit the object when backing up to the A if the object projects over the position * actual backing up course. SAA2606 PREDICTIVE GUID-A1B564F1-24FA-4947-A33F-A367488D81D9 COURSE LINE SETTINGS To turn ON or OFF the predictive course line display, push the SETTING button, select the “Camera” key and push the ENTER button. SAA1980 Backing up behind a projecting object GUID-670CA3F8-9400-411F-8372-B86FED77E300 C is shown further than the The position * B in the display.
HOW TO ADJUST SCREEN GUID-FEF721F4-FD6F-4B52-A3A2-CB66E29E880C To adjust the Display ON/OFF, Brightness, Tint, Color, Contrast and Black Level of the rearview monitor, push the SETTING button with the rearview monitor on, select the “Display” key on the screen and select the item key and adjust the level using the INFINITI controller. Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the rearview monitor while the vehicle is moving. Make sure the parking brake is firmly applied.
AROUND VIEWTM MONITOR (AVM) (models with navigation system) GUID-1C82F6B0-F35D-4D10-8883-9C4F05B7CE7C When you push the CAMERA button or shift the selector lever into the R (Reverse) position while the ignition switch is in the ON position, the Around View Monitor operates. The monitor displays various views of the position of the vehicle. monitor WARNING .
may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. . Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock. CAUTION Do not scratch the lens when cleaning dirt or snow from the front of the camera.
: : : Shift the selector lever Select the “Change View” key on the screen Push the CAMERA button A : Original * B : * C : * D : * E : * F : * G : * screen before the Around View Monitor is operated Rear view/bird-eye view screen Rear view/front-side view screen Rear-wide view screen Front view/bird-eye view screen Front view/front-side view screen Front-wide view screen HOW TO SWITCH THE DISPLAY GUID-F4C8E097-E6ED-4346-BF4F-F8006370ADFD The Around View Monitor display consists of the left and the right
played. . When selecting the “Change View” key on the screen, the view on the screen will switch between the available views 11 /* 13 /* 20 . * . The view on the driver’s side or the wide view switches to the rear view B /* C /* D when the selector lever is * shifted into the R (Reverse) position 15 /* 17 /* 19 . The view on the driver’s * side or the wide view returns to the E /* F /* G when the selecfront view * tor lever is shifted out of the R (Reverse) 14 /* 16 /* 18 . position * .
Front and rearview GUID-58A6B780-BD44-4999-A025-3284F1E11B62 NOTE: Guiding lines, which indicate the vehicle width and distances to objects with reA , are ference to the vehicle body line * displayed on the monitor. When the monitor displays the front view and the steering wheel turns about 90 degrees or less from the neutral position, both the right and left predictive course 6 are displayed.
. . When the corner of the vehicle moves closer to an object, the corner sonar 3 appears. indicators * A line on the ground may be misaligned and is not seen as being straight at the seam of the views. The misalignment will increase as the line proceeds away from the vehicle. The driver can check the direction and angle of the tire on the display by tire icon 4 when driving the vehicle forward or * backward.
when a corner of the vehicle moves closer to an object. the predictive course lines are shown at back of the vehicle. 4 The corner sonar indicator * can be turned off. See “Around view monitor settings” (P.4-45). CAUTION The turn signal light may look like with the side-of-vehicle line. This is not a malfunction. SAA1842 Front-side view GUID-DAA5B21F-4CA9-4881-BCF0-35538422B752 Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor.
Front-wide/rear-wide view GUID-4CCE7ECF-CBC4-4E29-9EFB-18866D91A6B1 The front-wide/rear-wide view shows a wider area on the entire screen and allows the checking of the blind corners on the right and left sides. The front-wide/rearwide view displays an approximately 180degree area while the front view and the rear view display an approximately 150degree area. The predictive course lines are not displayed on the front-wide/rear-wide view.
B . Note that any object on the hill is place * viewed in the monitor closer than it appears. DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DISTANCES GUID-3CC6A82D-7360-4E34-99EF-49B6229F18C4 Moving to aGUID-A98524A9-57FE-4537-A08C-DBE905A32176 steep uphill When moving the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display A , but the shows 3 ft (1 m) to the place * actual 3 ft (1 m) distance on the hill is the B .
actual moving course. CAMERA AIDING CORNER SONAR FUNCTION GUID-D90B754B-3DDE-47BC-8232-29D6EC7F4A58 When the corner of the vehicle moves closer to the object while the Around View Monitor is displayed, an indicator is displayed and a tone is sounded by the corner sonar function to warn the driver. WARNING SAA1923 Moving near a projecting object GUID-AD77F4BA-FA47-438B-94C2-96C482A52387 A The predictive course lines * do not touch the object in the display.
. compressed-air brakes or a pneumatic drill may affect the function of the system; this may include reduced performance or a false activation. . This function is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. Excessive noise (such as audio system volume or an open vehicle window) will interfere with the tone and it may not be heard. .
. When vehicle speed decreases below approximately 6 MPH (10 km/h). . When the ignition switch is placed in the “OFF” position and turned back to the “ON” position again. . When the switch is selected, the MOD function will also be turned off. To prevent the sonar system from activating altogether, use the “Camera Settings” menu. For more information, see “Around view monitor settings” (P.4-45) in this section.
check the surrounding to ensure it is safe to maneuver. . The MOD system does not have the function to detect the surrounding stationary objects. JVH0289X Bird-eye view JVH0291X Front-wide view / rear-wide view When the MOD system detects a moving object surrounding the vehicle, the yellow frame will be displayed on the view where the objects are detected and a chime will sound once. While the MOD system continues to detect moving objects, the yellow frame continues to be displayed.
While the sonar is beeping, the MOD system does not chime. 3 is displayed in the A blue MOD icon * view where the MOD system is operative. A 3 is displayed in the view gray MOD icon * where the MOD system is not operative. 4 is selected, the When the “MOD” key * MOD system will turn off temporarily and 5 will turn off. At the same the indicator * time a camera-aiding sonar will also be turned OFF. When the “MOD” key is selected again, the indicator will turn on and the MOD system will turn back on.
Non-viewable Area Reminder: View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied. With this item turned to ON, the nonviewable area is highlighted in yellow for several seconds after the bird-eye view is displayed. It will be shown only the first time after the ignition switch is in the “ON” position. Buzzer Volume: Adjust the volume of the buzzer. Corner Sonar Sensitivity: JVH0323M Adjust the sensitivity level of the corner sonar higher (right) or lower (left).
turned to OFF (indicator turns off), the front and rear sonar is deactivated. The amber markers are displayed at the corners of the vehicle icon and the sonar icon will disappear on the . When the MOD is turned OFF on the setting menu as well, the “MOD” will disappear. The next time the ignition switch is placed in the “ON” position, “Sonar is OFF” is displayed briefly. Towing Mode: JVH0269X Moving Object Detection (MOD): When this item is turned ON, only the rear sonar is OFF.
JVH0271X When the “[X]” icon is displayed on the screen, the camera image may be receiving temporary electronic disturbances from surrounding devices. This will not hinder normal driving operation but the system should be inspected by an INFINITI retailer if it occurs frequently. OPERATINGGUID-C4FD04C9-2801-414F-9A88-67816EB6BDC9 TIPS .
VENTILATORS AUTOMATIC CLIMATE CONTROL GUID-83C5DBDC-2EF4-436C-B8F0-F68300F11357 GUID-3937E88E-58B2-4D4C-A81D-034656C15E84 WARNING SAA2149 Center ventilators . The air conditioner cooling function operates only when the engine is running. . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either.
You can individually set the driver and front passenger side temperature using each temperature control button.
1. SAA1527 Without Advanced Climate Control System (ACCS) SAA2153 With Advanced Climate Control System (ACCS) 4-50 Monitor, climate, audio, phone and voice recognition systems “AUTO” automatic climate control ON button/Temperature control dial (driver side) 2. “A/C” air conditioner ON/OFF button 3. “ ” fan speed increase button 4. “ ” front defroster button 5. “MODE” manual air flow control button 6. “DUAL” zone control ON/OFF button/ Temperature control dial (passenger side) 7.
AUTOMATICGUID-0BE1694A-DD97-4BA4-BF44-857EEABBA6F7 CLIMATE CONTROL Automatic operation GUID-EEBF6925-BD00-4785-857D-0DF075978760 Cooling and/or dehumidified heating (AUTO): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 This mode may be used all year round. The system works automatically to control the inside temperature, air flow distribution and fan speed after the preferred temperature is set manually. 1. Push the “AUTO” button on. (The indicator on the button will illuminate and AUTO will be displayed.) 2.
Manual operation GUID-98E726A1-B84E-4603-A00E-6B4E72820C32 Fan speed control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Push the fan speed increase “ ” or decrease “ ” buttons to manually control the fan speed. Push the “AUTO” button to return to automatic control of the fan speed. Temperature control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Turn the temperature control dial to set the desired temperature. . The temperature can be set within the following range. — For U.S.
The amount of Plasmacluster® ions increases according to the amount of air flow. When the air flow is high, “ ” is displayed on the screen and when the air flow is low, the indication in the screen changes to “ ”. Plasmacluster® and Plasmacluster® ion are registered trademarks of Sharp Corporation.
AUDIO SYSTEM GUID-3EAB71B4-A10F-4A54-9F10-43B665795E96 SAA1983 A on the instrument The sunload sensor * panel helps maintain a constant temperature. Do not put anything on or around this sensor. IN-CABIN MICROFILTER GUID-B5FB0932-D5C6-4573-A11E-E201E99F47D1 To make sure that the air conditioner heats, defogs and ventilates efficiently, replace the filter according the specified maintenance intervals listed in the INFINITI Service and Maintenance Guide. To replace the filter, contact an INFINITI retailer.
from a station transmitter, the signals will tend to fade and/or drift. equipment is used. These characteristics are completely normal in a given reception area, and do not indicate any malfunction in your INFINITI radio system. Static and flutter: During signal interference from buildings, large hills or due to antenna position, usually in conjunction with increased distance from the station transmitter, static or flutter can be heard.
cles exist. Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights. Satellite radioGUID-D73A39BF-43C8-459F-9C24-47B7F579C407 reception: When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly. This is not a malfunction. Wait more than 10 minutes with the satellite radio ON and the vehicle outside of any metal or large building for the satellite radio to receive all of the necessary data.
tion. — 3.1 in (8 cm) discs — CDs that are not round — CDs with a paper label — CDs that are warped, scratched, or have abnormal edges . This audio system can only play prerecorded CDs. It has no capabilities to record or burn CDs. . If the CD cannot be played, one of the following messages will be displayed. CHECK DISC: . Confirm that the CD is inserted correctly (the label side is facing up, etc.). . Confirm that the CD is not bent or warped and it is free of scratches.
identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.
. . . . . LHA0484 DVD (Digital Versatile Disc) player (models with navigation system) GUID-2917B6C0-CBFF-450D-9DAB-241FE2148356 . Do not force a compact disc into the CD/DVD insert slot. This could damage the CD/DVD player. . During cold weather or rainy days, the player may malfunction due to humid- . ity. If this occurs, remove the CD/DVD and dehumidify or ventilate the player completely. The player may skip while driving on rough roads.
temperature of the player returns to normal. If the error persists, consult your local retailership. Unplayable File: . The file may be copy protected. . The file is not MP3, WMA, AAC, M4A or DivX® type. Region Invalid: . The DVD is not for region 1 or all regions. Use DVDs with a region code “1”, “ALL” or “1 included” for your DVD entertainment system. (The region code A is displayed as a small symbol * B .
. To avoid damage and loss of function when using a USB device, note the following precautions. The vehicle is not equipped with a USB device. USB devices should be purchased separately as necessary. — Do not bend the cable excessively (1.6 in (40 mm) radius minimum). This system cannot be used to format USB devices. To format a USB device, use a personal computer. — Do not twist the cable excessively (more than 180 degrees). — Do not pull or drop the cable.
Notes for iPod® use: iPod ® is a trademark of Apple Inc., registered in the U.S. and other countries. . Improperly plugging in the iPod® may cause a checkmark to be displayed on and off (flickering). Always make sure that the iPod® is connected properly. . An iPod nano® (1st Generation) may remain in fast forward or rewind mode if it is connected during a seek operation. In this case, please manually reset the iPod®. .
* Windows® and Windows Media® are registered trademarks or trademarks of Microsoft Corporation in the United States of America and/or other countries. . The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order. . Music playback order of compressed audio files is as illustrated. SAA2494 Playback order: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 .
Specification GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 chart: Supported media CD, CD-R, CD-RW, DVD-ROM*5, DVD±R*5, DVD±RW*5, DVD±R DL*5, USB2.0 CD, CD-R, CD-RW, DVD-ROM*5, DVD±R*5, DVD±RW*5, DVD±R DL*5: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista-based computer) are not supported. UDF Bridge (UDF1.02+ISO9660), UDF1.5, UDF2.0 * VDF1.5/VDF2.0 (packet writing) is not supported.
*3 *4 *5 Available codes depend on what kind of media, versions and information are going to be displayed. When VBR files are played, the playback time may not be displayed correctly.
Troubleshooting guide: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Symptom Cause and Countermeasure Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player will play correctly after it returns to the normal temperature.
Compressed Video Files (models with navigation system) GUID-4B1EFDE5-D60B-46F6-8744-1D218BD322BB mined by the bit rate used when encoding the file. Explanation of terms: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 . DivX® - DivX® refers to the DivX® codec owned by DivX, Inc. used for a lossy compression of video based on MPEG4. . AVI - AVI stands for Audio Video Interleave. It is a standard file format originated by Microsoft Corporation. A “.divx” encoded file can be saved into the “.
Requirement for Supporting Video Playback: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Media File Systems File Types CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.0 Memory ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02 CD, +ISO9660), UDF1.5, UDF2.0 CD-R, - ISO9660 Level 3 (packet writing) is not supported. CD-RW, - Files saved using the Live File System component (on a Windows VistaDVD, based computer) are not supported. DVD±R, - VDF1.5/VDF2.0 (packet writing) is not supported.
dation and wireless connection disruption. . While an audio device is connected through a Bluetooth® wireless connection, the battery power of the device may discharge quicker than usual. . This system supports the Bluetooth® Audio Distribution Profile (A2DP, AVRCP). . Wireless LAN (Wi-Fi) and the Bluetooth® functions share the same frequency band (2.4 GHz). Using the Bluetooth® and the wireless LAN functions at the same time may slow down or disconnect the communication and cause undesired noise.
The audio control buttons are also located on the center multi-function control panel. JVH0138X 1. 2. Models with navigation system AM·FM·SAT radio band select button DISC·AUX button SAA2922 Models without navigation system 1. AUX/Satellite radio band select button 2. RADIO AM·FM band select button 3. DISC button FM-AM-SAT RADIO WITH COMPACT DISC (CD) PLAYER GUID-C021FE70-07D4-42D4-9BB9-C221E5410862 For all operation precautions, see “Audio operation precautions” (P.4-54).
activation signal after subscribing the SiriusXM Satellite Radio. After receiving the activation signal, an available channel list will be automatically updated in the radio. Push the ignition switch from LOCK to ACC to update the channel list. Audio mainGUID-2414549C-6269-47A8-96D6-0C3005C0154F operation Head unit: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback.
. For SiriusXM Satellite Radio Turn the radio tuning knob to seek channels from all of the categories when any category is not selected. SEEK tuning/CATEGORY (CAT): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 . For AM and FM radio Push the SEEK·CAT or TRACK button to tune from low to high or high to low frequencies and to stop at the next broadcasting station. . For SiriusXM Satellite Radio Push the SEEK·CAT or TRACK button to tune to the first channel of the next or previous category.
turned off and the CD will start to play. stored as the new preset. . Customize Channel List Selects specific channels to skip while using the TUNE, SEEK/CATEGORY or Menu-Categories feature. . Favorite Artists & Songs Stores the current artist or song that is being played. Touch the “Alert” key to be reminded when the stored artist or song is playing on a station while listening to SiriusXM. .
information from CDs. Text (models GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 without navigation system): When the “Text” key is selected in the screen using the INFINITI controller and then the ENTER button is pushed while the CD is being played, the music information below will be displayed on the screen. CD: . Disc title . Track title CD with compressed audio files: . . . . .
. tint, color and contrast, select the “Display Adjustment” key and then select each key. Do not attempt to modify the system to display a movie on the front screen while the vehicle is being driven. Doing so may distract the driver and may cause a collision and serious personal injury or death. Then you can adjust each item using the INFINITI controller. After changes have been made push the BACK button to save the setting. CAUTION . Only operate the DVD while the vehicle engine is running.
matically after a period of time. To turn it on again, push the DISC·AUX button again. DVD operation keys: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When the DVD is playing without the operation screen being shown, you may use the touch screen to select items from the displayed video. You may also use the INFINITI controller to select an item from the displayed video. When the operation screen is being shown, use the INFINITI controller or touch screen to select an item from the displayed menus.
Hide: Hide the operation key. Title Menu (DVD-VIDEO): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Some menus specific to each disc will be shown. For details, see the instructions on the disc. Title Search (DVD-VIDEO, DVD-VR): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The scene with the specified title will be displayed each time the “+” side or “−” side is selected. SAA2498 Example DVD settings GUID-32629F51-527A-4BF7-91A5-DAB13226A19F Select the “Settings” key to adjust the following settings.
DVD Language (DVD-VIDEO, VIDEO-CD): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Select the “DVD Language” key to open the number entry screen. Input the number corresponding to the preferred language and select the “OK” key. The DVD top menu language will be changed to the one specified. CAUTION Display: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 To adjust the image quality of the screen, select the preferred adjustment items.
Audio file operation GUID-66474C30-8A89-4B24-B08E-898987A726FC or PLAY: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When the DISC·AUX or AUX button is pushed with the system off and the USB memory inserted, the system will turn on. If another audio source is playing and a USB memory is inserted, push the DISC·AUX or AUX button repeatedly until the center display changes to the USB memory mode.
When the REW button is pushed for less than 1.5 seconds after 3 seconds from when the current track started playing, the beginning of the current track will be played. The INFINITI controller can also be used to select tracks when the USB memory is being played. Folder selection: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 To change to another folder in the USB memory, turn the folder selector or choose a folder displayed on the screen using the INFINITI controller.
mode. ing to the movie playback mode. . Play Mode Select the preferred play mode. Operation keys: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 To operate the USB memory, select the desired key displayed on the operation screen using the INFINITI controller. Pause ” key to pause the movie Select the “ file. To resume playing the movie file, select the “ ” key.
Skip (Previous chapter) Select the “ ” key to skip the chapter(s) of the disc backward. The chapters will go back the number of times the “ ” key is selected. . List: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Select the “List” key on the movie file operation screen to display the file list. . SAA2504 . Example 4-82 Settings: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Select the “Settings” key to adjust the following settings. . . Audio File Playback Switch to the audio playback mode.
Bluetooth® STREAMING AUDIO (models with navigation system) GUID-CCAA3EF0-821B-4E76-AFEA-36C868643DF3 Your INFINITI is equipped with Bluetooth® Streaming Audio. If you have a compatible Bluetooth® device with streaming audio (A2DP profile), you can set up the wireless connection between your Bluetooth® device and the in-vehicle audio system. This connection allows you to listen to the audio from the Bluetooth® device using your vehicle speakers.
SAA2505 Connecting GUID-90E68FE5-9EFB-4A01-95F4-823B7AC70F2D procedure SAA2506 2. Select the “Connect Bluetooth” key. 1. Push the SETTING button and select the “Bluetooth” key. 4-84 Monitor, climate, audio, phone and voice recognition systems SAA2507 3. A confirmation screen will be displayed. Select “No”. Note: Selecting “Yes” will only connect the hands free phone portion of a Bluetooth® device.
DISC·AUX button: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When the DISC·AUX button is pushed with the system off and the Bluetooth audio device connected, the system will turn on. If another audio source is playing and the Bluetooth® audio device is connected, push the DISC·AUX button repeatedly until the display changes to the Bluetooth audio mode. SAA3005 4. When a passkey appears on the screen, operate the compatible Bluetooth® audio device to enter the passkey.
when the current track started playing, the beginning of the current track will be played. The INFINITI controller can also be used to select tracks when the Bluetooth® audio play mode screen is shown on the display. (“Bluetooth audio” will be indicated on the header of the screen.) REPEATGUID-D73A39BF-43C8-459F-9C24-47B7F579C407 (RPT), RANDOM (RDM): To change the play mode, push the button repeatedly and the mode changes as follows.
Connected Devices: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Registered devices are shown on the list. Select a Bluetooth device from the list, the following options will be available. . Select Select “Select” to connect the selected device to the vehicle. If there is a different device currently connected, the selected device will replace the current device. . Edit Rename the selected Bluetooth device using the keypad displayed on the screen.
* iPod® is a trademark of Apple Inc., registered in the U.S. and other countries. CAUTION . Depending on size and shape of iPod® and iPod® cable, the console lid may not fully close. Do not force console lid closed as this may damage iPod® and iPod® cable. . Do not force the iPod® cable into the USB port. Inserting the iPod® cable tilted or up-side-down into the port may damage the iPod® cable and the port. Make sure that the iPod® cable is connected correctly into the USB port.
display changes to the iPod® mode. Interface: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The interface for iPod® operation shown on the vehicle center display is similar to the iPod® interface. Use the INFINITI controller and the ENTER or BACK button to play the iPod® with your favorite settings. Next/Previous Track and FastForward/Rewind: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Push the FF or REW button for more than 1.5 seconds while a iPod® is being played to fast-forward or rewind through the track.
trial use. . A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. USB memory GUID-940B4369-4D85-4B45-8859-78CF64C6BA21 SAA0451 CD/DVD/USB MEMORY CARE AND CLEANING GUID-83AF00DE-DD3E-437A-85E8-3C4433AB98CF CD/DVD GUID-44E4FB83-C3B4-42F0-AF0D-BEB6E3898F99 . Handle a CD/DVD by its edges. Never touch the surface of the disc. Do not bend the disc. .
1. 2. 3. 4. Audio source switch Menu control switch (models with navigation system) or audio tuning switch (models without navigation system) Back switch Volume control switch STEERING-WHEEL-MOUNTED CONTROLS FORGUID-C972F4C0-4825-48BA-A398-1AA830A1E14B AUDIO Menu control switch (models with navigation system) or audio tuning switch (models without navigation system) GUID-16BE89C2-F2B5-474E-B9DC-823D2817C2C0 next station. . Pushing the menu control switch will show the list of preset stations.
Bluetooth streaming audio (models with navigation system): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 . Tilting up/down for less than 1.5 seconds will scroll up or down through the track numbers. ANTENNA GUID-AE2A1B06-214C-4AED-96FD-BEAB368761F3 Window antenna GUID-12947480-6DBF-480B-8E69-BF1B2D324CA2 The antenna pattern is printed inside the rear window. BACKGUID-DACC6D2C-1D0D-448F-9E17-7B65E141CC04 switch Push this switch to go back to the previous screen or cancel the selection if it is not completed.
CAR PHONE OR CB RADIO GUID-40C10CB6-3B65-48C2-8CF5-A166E26D8D19 — The vehicle enters an automatic car wash. — The vehicle enters a garage with a low ceiling. — The vehicle is covered with a car cover. . Always properly tighten the antenna rod during installation. Otherwise, the antenna rod may break during vehicle operation.
Bluetooth® HANDS-FREE PHONE SYSTEM (models with navigation system) GUID-61CB5DE5-0726-4AEF-AD72-315D1B535D73 WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. . If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so.
. Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption. . While a cellular phone is connected through the Bluetooth® wireless connection, the battery power of the cellular phone may discharge quicker than usual. . If the Bluetooth® Hands-Free Phone System seems to be malfunctioning, please visit www.InfinitiUSA.com/bluetooth for troubleshooting help. .
SAA2248 SAA2519 CONTROL BUTTONS GUID-7B91C5E2-B43D-4525-A730-4E8AD453F2F8 CONNECTING PROCEDURE GUID-B3579665-9529-4255-AA3B-80A86E45F1F1 1. 2. 1. Push the button, and select the “Connect Phone” key. TALK button PHONE SEND button SAA2520 2. When a PIN code appears on the screen, operate the compatible Bluetooth® cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for the details.
Phone menu display. PHONE SELECTION GUID-9468F7A4-90AE-4C93-9E43-03E8792BEB34 Up to 5 cellular phones can be registered to the system. To switch to connect another cellular phone, push button and select the “Connected Phones” key. The registered cellular phones are shown on the list. If you select a cellular phone that is different from the one currently connected, the newly selected phone will be connected to the system.
options instead of “Enter Number by Keypad” in step 3. SAA2523 5. Select the “Voicetag” key to record a name to speak when using the INFINITI Voice Recognition system. . Copy from Call History The system will show a list of incoming, outgoing or missed calls that were downloaded from the connected cellular phone (depending on the phone’s compatibility). Select one of these entries to save in the vehicle phonebook. .
tags allow easy dialing using the INFINITI Voice Recognition system. (See “INFINITI Voice Recognition System (models with navigation system)” (P.4119).) To delete an entry, select the “Delete” key at step 3. SAA2523 The following editing items are available: . Entry # Changes the displayed number of the selected entry. . Name Edit the name of the entry using the keypad displayed on the screen. . Number Edit the phone number using the keypad displayed on the screen. .
. Dial Number Input the phone number manually using the keypad displayed on the screen. (See “How to use touch screen (models with navigation system)” (P.45).) SAA2621 5. Select the “Call” key to start dialing the number. There are different methods to make a call. Select one of the following options instead of “Handset Phonebook” in step 2 above. . Vehicle Phonebook Select an entry stored in the Vehicle’s Phonebook. .
. Cancel Mute This will appear after “Mute” is selected. Mute will be canceled. . Switch Call* Select “Switch Call” to answer another incoming call. By selecting “Hang up”, you can end a call and can speak to a caller who is on hold again. * This function may not be usable, depending on the model of phone . Hold Call Put an incoming call on hold. . Reject Call Reject an incoming call. To finish the call, perform one of the following procedures listed below. 1. Select the “Hang up” key. 2. Push the wheel.
Download Handset Phonebook GUID-CFB7E243-6F58-449E-84A7-DF028AF48B2F Download the contacts registered in a Bluetooth® cellular phone. Availability of this function depends on each cellular phone. The memory downloading procedure from the cellular phone also varies according to each cellular phone. See cellular phone Owner’s Manual for details.
TROUBLESHOOTING GUIDE GUID-98FF02E9-7F46-478E-BE66-E2A96DB25729 The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution 1. Ensure that the command is valid. (See “INFINITI Voice Recognition System (models with navigation system)” (P.4-119).) 2.
Bluetooth® HANDS-FREE PHONE SYSTEM (models without navigation system) GUID-15D0990F-B975-4602-B3D0-498739F41B2C WARNING . . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so.
. . . . . . may be difficult to hear the other person’s voice during a call. Immediately after the ignition switch is pushed to the “ON” position, it may be impossible to receive a call for a short period of time. Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption.
Bluetooth® is a trademark owned by Bluetooth SIG, Inc., and licensed to Visteon Corporation. VOICE RECOGNITION SYSTEM GUID-3FF35FBA-0271-43D5-B7F4-337176E6E4FA You can also use the Bluetooth® handsfree phone system with Voice Recognition System. INFO SAA2634 CONTROL BUTTONS GUID-ADC5794C-CA38-4CAA-98F7-BEDAF8071AEF 1. 2. 4-106 PHONE SEND button Push the button to initiate a Voice Recognition (VR) session or answer an incoming call.
. Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands correctly. . Wait until a tone sounds before speaking a command. . Speak a voice command within 5 seconds after the beep sound. If no voice command is given, the system will ask you for a number. If no further command is given, the session ends. .
command recognition mode . 4. The system acknowledges the command and announces the next set of available commands. 5. After the tone sounds, speak the phone number. 6. When you have finished speaking the phone number, the system repeats it back and announces the available commands. 7. After system responds, speak “Dial” and the system dials the spoken numbers. Operating tips: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 . Voice commands cannot be accepted when the icon is . .
cent Calls, Connect Phone or Help”. 3. Give your instructions to the system by saying: “Dial John” for example (“John” must have been previously set as a voice tag for John’s phone number) or “Dial One” if John is classified as one in the phonebook. current operation, and then perform the first procedure of voice command. If the system cannot understand your command, repeat it according to the recommendations mentioned in “How to speak commands” (P.4-108). 4.
List of voice commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 COMMAND ACTION “Call/Dial” “” Dials the specified . “Call/Dial” “Redial” Dials the last number. “Call” “” Dials the specified . “Phonebook” “Number” “” Displays the specified in the phonebook. “Phonebook” “List Names” Displays all the names in the phonebook. “Phonebook” “Transfer Entry” Transfers the phonebook data to the system.
SAA2575 PAIRING PROCEDURE GUID-AAD5B7D6-C780-438F-A7EA-17D9D1E2392F Up to 5 cellular phones can be registered. 1. Push the button on the steering wheel. The system announces the available commands. 2. Speak: “Connect Phone”. The system acknowledges the command and announces the next set of available commands. SAA2576 3. Speak: “Add Phone”. The system acknowledges the command and asks you to initiate connecting from the phone handset.
book. SAA2578 5. The system asks the user to speak a name for the phone. Speak: “Yes”. The system acknowledges the command and registers the cellular phone. If the name is too long or too short, the system tells the user, then prompts the user for a name again. Also, if more than one phone is connected and the name sounds too much like a name already used, the system tells the user, then prompts the user for name again.
call. 5. Once the call has ended, press the button on the steering wheel. RECEIVING GUID-46C9F656-861B-4B20-A7D1-9B4923621ADC A CALL When the ring tone is heard, press the button on the steering wheel. Once the call has ended, press the button on the steering wheel. NOTE: SAA2580 To reject a call when the ring tone is heard, press the button on the steering wheel.
call. . “Mute on/off” — Use the Mute command to mute the user’s voice so the other party cannot hear it. Use the mute command again to unmute the user’s voice. . “Transfer Handset” — Use the Transfer Handset command to transfer the call from the Bluetooth® Hands-Free Phone System to a cellular phone when privacy is desired. The system announces, “Transfer Handset. The call is transferred to the handset only.” The system then ends the VR session.
SAA2583 PhonebookGUID-9B091183-6430-43A2-813C-9DDBF64B5197 . (a name) Use the name command to seek the name and locations registered in the phonebook in alphabetical order. When the system acknowledges the alphabet the user spoke, the system announces all registered names and locations beginning with that alphabet. Playback of the list can be stopped at any time by pressing a button on the steering wheel. The system ends the VR session. .
. Callback Use the Callback command to dial the last incoming call. . Help The system announces the available commands. SAA2584 SAA2585 Recent CallsGUID-052499E8-9446-4B18-B352-F87C669017FD Connect Phone GUID-A9CAF86D-6E73-4203-9784-F6BE0F3C2476 . Incoming Use the Incoming command to make a call viewing the list of incoming calls. . Missed Use the Missed command to make a call viewing the list of missed calls. . Outgoing Use the Outgoing command to make a call viewing the list of outgoing calls. .
existing phone. If the user tries to connect a phone that has already been connected to the vehicle system, the system announces the name that the phone is already using. The connecting procedure will then be cancelled. The Add Phone command is not available when the vehicle is moving. . Select Phone Use the Select Phone command to select a phone of lesser priority when two or more phones connected with Bluetooth® Hands-Free Phone System are in the vehicle at the same time.
will prompt you to overwrite one. Follow the instructions provided by the system. Training phrases GUID-7A6C37C4-0427-453B-BBD7-D45378797D7C 7. When preparation is complete and you are ready to begin, press the button. (The system will prompt you for each phrase.) 8. The speaker adaptation mode will be explained. Follow the instructions provided by the system. 9. When training is finished, the system will tell you an adequate number of phrases have been recorded. 10.
INFINITI VOICE RECOGNITION SYSTEM (models with navigation system) GUID-575395B9-727F-43FF-A15B-EDACD818AC35 INFINITI Voice Recognition allows handsfree operation of the Phone, Navigation, Information and Audio systems in one of two modes, Standard Mode or Alternate Command Mode. In Standard Mode, commands that are available are always shown on the display and announced by the system. You can complete your desired operation by simply following the prompts given by the system.
SAA2530 SAA2531 4. Select the “Alternate Command Mode” key. 1. Push the INFO button on the instrument panel. 5. The indicator turns off and the Standard Mode activates. 2. Select the “Others” key. Displaying GUID-BB6A08D4-0739-466D-9C42-841BD18D531E user guide 4. Select the “User Guide” key. If you use the INFINITI Voice Recognition system for the first time or you do not know how to operate it, you can display the User Guide for confirmation. 5. Select a preferred item.
Voice Recognition. SAA2532 SAA2534 Getting Started GUID-841DA7DA-BD1C-4126-9035-0A1C589FE36F Let’s Practice GUID-6B2C8C01-0AB9-4EB1-B868-A1CAAB4C6B5C Before using the INFINITI Voice Recognition system for the first time, you can confirm how to use commands by viewing the Getting Started section of the User Guide. This mode helps learn how to use the INFINITI Voice Recognition system. 1. Select the “Getting Started” key. 2.
USING THE GUID-39C2460F-8E7F-41DE-8D53-32F381B5CD7B SYSTEM InitializationGUID-E326306F-0251-4EFC-8B3A-6757119AA3DE When the ignition switch is pushed to the ON position, INFINITI Voice Recognition is initialized, which may take up to one minute. When completed, the system is ready to accept voice commands. If the TALK switch is pushed before the initialization completes, the display will show the message: “System not ready.” or a beep sounds.
Selecting the “Help” key can display the detailed information of the each command. SAA2167 Giving voiceGUID-085677B5-7320-4911-A84F-01206F17119B commands 1. Push the TALK switch located on the steering wheel. SAA2535 2. A list of commands appears on the screen, and the system announces, “Would you like to access Phone, Navigation, Information, Audio or Help?”. 3. After the tone sounds and the icon on the screen changes from to , speak a command. Selecting the “Practice” key will start the practice mode.
steering switch or use the audio system volume knob while the system is making an announcement. How to speakGUID-D73A39BF-43C8-459F-9C24-47B7F579C407 numbers: INFINITI Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples. General rule Only single digits 0 (zero) to 9 can be used. (For example, if you would like to say 500, “five zero zero” can be used, but “five hundred” cannot.) Examples .
Command List GUID-51E96D88-63BA-462B-914B-A7595C5813C2 Category Command: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Command Action Phone Operates the Phone function Navigation Operates the Navigation function Information Displays the vehicle Information function Audio Operates the Audio function. Help Displays User Guide . Phone Command: Command Action Dial Number Makes a call to a spoken phone number up to 10 digits.
Command Action Previous Destinations Sets a route to a previous destination. . Information Command: Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Traffic Information Displays the [Info On Route] screen when a route to the destination is set. Displays the [Nearby Traffic Info.] screen when a route to the destination is not set. Tire Pressure Displays tire pressure information. Where am I? Displays your current location. .
Voice command examples GUID-33326639-5C75-4573-840C-AD81EF0BD841 To use the INFINITI Voice Recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here. For navigation system commands, see the separate Navigation System Owner’s Manual. SAA2167 Example 1 - Placing a call to the phone number 800-662-6200: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 1.
SAA2536 4. Speak “Dial Number”. SAA2537 5. Speak “8 0 0”. Selecting the “Manual Controls” key switches the screen to the keypad to input the phone number manually. 4-128 Monitor, climate, audio, phone and voice recognition systems SAA2538 6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Speak “6 6 2”.
SAA2539 SAA2540 8. The system announces, “Please say the last four digits” or say change number. 10. The system announces, “Dial or Change Number?” 9. Speak “6 2 0 0”. 11. Speak “Dial”. 12. The system makes a call to 800-6626200. . You can only say a phone number using the 3-3-4 grouping, 7 digits, and 10 digits using this command. Please use the “International Call” command for all other formats. .
SAA2167 Example 2 - Placing an international call to the phone number 011-81-111-222-3333: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 1. Push the TALK switch located on the steering wheel. 4-130 SAA2535 2. The system announces, “Would you like to access Phone, Navigation, Information, Audio or Help?” 3. Speak “Phone”. Monitor, climate, audio, phone and voice recognition systems SAA2536 4. Speak “International Call”.
INFINITI VOICE RECOGNITION ALTERNATE COMMAND MODE GUID-918CFB1A-8B4D-4654-9F94-4AB4B38ADAC2 The following section is applicable when Alternate Command Mode is activated. When Alternate Command Mode is activated, an expanded list of commands can be used after pressing the TALK switch. In this mode, available commands are not fully shown on the display or prompted. Review the expanded command list when this mode is active. See examples of Alternate Command Mode screens. SAA2541 5. Speak “011811112223333”.
JVH0137M Activating Alternate Command Mode GUID-EF112A55-FA80-4F29-AE0D-AB5292D985F6 When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode. 1. Push the SETTING button on the instrument panel. 2. Highlight the “Others” key. 3. Highlight the “Voice Recognition” key. 4-132 SAA2543 SAA2544 4. Highlight the “Alternate Command Mode” key. 1. Push the INFO button on the instrument panel. 5. The confirmation message is displayed on the screen.
SAA2545 5. Select a category from the list. SAA2546 6. Select an item. 7. If necessary, scroll the screen using the INFINITI controller to view the entire list. 8. Press the BACK button to return to the previous screen.
Command List GUID-87B206E2-2109-4ADC-86CE-25460316F2DB Phone Commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Command Action Dial Number Makes a call to a spoken phone number. Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook. Handset Phonebook Call History Makes a call to a contact that is stored in the mobile phone. Incoming Calls Makes a call to the incoming call number. Outgoing Calls Makes a call to the dialed number.
Navigation Commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current vehicle location. Address Book Searches for stored information in the Address Book. Previous Destinations Sets a route to a previous destination.
Information Commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Where am I? Displays your current location. Traffic Information Displays the [Info On Route] screen when a route to the destination is set. Displays the [Nearby Traffic Info.] screen when a route to the destination is not set. Tire Pressure Displays tire pressure information. Weather Information Displays weather information.
Audio Commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Command Action CD Starts to play a CD. FM Turns to the FM band, selecting the station last played. AM Turns to the AM band, selecting the station last played. XM Turns to the SiriusXM Satellite Radio band, selecting the channel last played. USB Turns on the USB memory. Bluetooth Audio Turns on the Bluetooth® audio player.
Help Commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Command Command List Navigation Commands Action Displays the navigation command list. Phone Commands Displays the phone command list. Audio Commands Displays the audio command list. Information Commands Displays the information command list. Help Commands Displays the help command list. User Guide Displays the User Guide. Speaker Adaptation The system can memorize the voices of up to three persons.
General Commands: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Command Action Go back Corrects the last recognition result to return to the previous screen Exit Cancels Voice Recognition Monitor, climate, audio, phone and voice recognition systems 4-139
4. Highlight the “User Guide” key using the INFINITI controller and push the ENTER button. 5. Highlight an item using the INFINITI controller and push the ENTER button. SAA2547 Displaying user guide GUID-5779FB8A-7E05-4BCB-9E6D-E1F132279F73 You can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2.
. When the air conditioner is in the AUTO mode, the fan speed decreases automatically for easy recognition. . Wait until a tone sounds before speaking a command. . Speak in a natural voice without pausing between words. SAA2167 Giving voice command GUID-4666E63F-987E-4BB7-BD98-A0C3184022B4 1. Push and release the TALK located on the steering wheel. switch SAA2548 2. A list of commands appears on the screen, and the system announces, “Please say a command”. 3.
Repeat the command in a clear voice. . Push the BACK button once to return to the previous screen. . If you want to cancel the command, switch for push and hold the TALK 1 second. The message “Voice canceled” will be announced. . To skip the voice guidance function and give the command immediately, press the TALK switch to interrupt the system. Remember to speak after the tone. .
SAA2549 Speaker adaptation function (for Alternate Command Mode) GUID-AB0FED7B-F214-4CBB-AFB6-5106B03407A0 The voice recognition system has a function to learn the user’s voice for better voice recognition performance. The system can memorize the voices of up to three persons. Having the system learn the user’s voice: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 1. Push the SETTING button on the instrument panel and select the “Others” key. 2. Select the “Voice Recognition” key. SAA2550 4.
“None” to “Stored”. SAA2552 SAA2553 8. The system requests that you repeat a command after a tone. Speaker Adaptation function settings: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Edit User Name 9. After the tone sounds and the icon on the screen changes from to , speak the command that the system requested. Edit the user name using the keypad displayed on the screen. 10. When the system has recognized the voice command, the voice of the user is learned.
Minimize voice feedback (for Alternate Command Mode) GUID-776C67B9-F5B6-494C-A6EA-3153E3F336F7 To minimize the voice feedback from the system, perform the following steps. 1. Push the SETTING button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key. 4. Select the “Minimize Voice Feedback” key. 5. The setting is turned to ON and the voice guidance will now be reduced when using the Voice Recognition system.
TROUBLESHOOTING GUIDE GUID-F9B6FCF1-C9A0-4FA6-B77F-4A70F687A6D8 The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message Solution The system fails to interpret the command correctly. 1.
5 Starting and driving Precautions when starting and driving ................. ... 5-3 Exhaust gas (carbon monoxide) ....................... ... 5-3 Three-way catalyst ........................................... ... 5-3 Tire Pressure Monitoring System (TPMS).......... ... 5-4 Avoiding collision and rollover......................... ... 5-6 On-pavement and off-road driving precautions.......................................... ... 5-7 Off-road recovery ............................................. ...
Distance Control Assist (DCA) system (if so equipped) ..................................................... ... Precautions on distance control assist system ................................................ ... Distance control assist operation................... ... Forward Collision Warning (FCW) system (if so equipped) ..................................................... ... Precautions on FCW system ........................... ... Intelligent Brake Assist (IBA) system (if so equipped) .................
PRECAUTIONS WHEN STARTING AND DRIVING GUID-D68C0968-2C03-4229-A9B4-5A1EDD2A115A WARNING . . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals. death.
TIRE PRESSURE MONITORING SYSTEM (TPMS) GUID-A3B333D2-3D24-45BC-BA2B-1D802B3D86B3 cause a fire. CAUTION . Do not use leaded gasoline. Deposits from leaded gasoline seriously reduce the three-way catalyst’s ability to help reduce exhaust pollutants. . Keep your engine tuned up. Malfunctions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat.
Additional information GUID-391AE1C7-1CD5-4C27-A223-5241FF59940A . The TPMS does not monitor the tire pressure of the spare tire. . The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving). . The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted.
and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your INFINITI retailer as soon as possible for tire replacement and/or system resetting. . Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS. . Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors.
and avoid driving when tired. Never drive when under the influence of alcohol or drugs (including prescription or over-thecounter drugs which may cause drowsiness). Always wear your seat belt as outlined in the “Seat belts” (P.1-11) of this manual, and also instruct your passengers to do so. Seat belts help reduce the risk of injury in collisions and rollovers.
RAPID AIR GUID-CB38C0C5-B0D4-4330-A2B0-DB2F4D9DF493 PRESSURE LOSS collision and result in personal injury. Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on under-inflated tires. . The vehicle generally moves or pulls in the direction of the flat tire. . Do not rapidly apply the brakes. . Do not rapidly release the accelerator pedal. .
Don’t drive if your ability to operate your vehicle is impaired by alcohol, drugs, or some other physical condition. DRIVING SAFETY PRECAUTIONS GUID-0E6CF00A-19F1-4544-8B05-1C59AC0392D6 Your INFINITI is designed for both normal and off-road use. However, avoid driving in deep water or mud as your INFINITI is mainly designed for leisure use, unlike a conventional off-road vehicle.
unlevel surface, do not spin the wheel excessively. by strong side winds. Slower speeds ensure better vehicle control. . Do not drive beyond the performance capability of the tires, even with AWD engaged. . Accelerating quickly, sharp steering maneuvers or sudden braking may cause loss of control. . For AWD equipped vehicles, do not attempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running.
PUSH-BUTTON IGNITION SWITCH GUID-387E946E-D3FB-4B7C-A35C-9AFED0ADFEE4 someone who does not carry the Intelligent Key, to push the ignition switch to start the engine. WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the ignition switch is pushed and held for more than 2 seconds.
to LOCK until the selector lever is moved to the P (Park) position. When the ignition switch cannot be pushed toward the LOCK position, proceed as follows: 1. Move the selector lever into the P (Park) position. 2. Push the ignition switch to the OFF position. The ignition switch position indicator will not illuminate.
To remove the Intelligent Key from the port, push the ignition switch to the OFF position and pull the Intelligent Key out of the port. CAUTION Do not leave the vehicle with the pushbutton ignition switch in ACC or ON positions when the engine is not running for an extended period. This can discharge the battery. NOTE: The Intelligent Key port does not charge the Intelligent Key battery. If you see the low battery indicator in the dot matrix liquid crystal display, replace the battery as soon as possible.
BEFORE STARTING THE ENGINE GUID-C6A44AD2-C9E9-4EA9-964E-986163AC0A36 . Make sure the area around the vehicle is clear. . Check fluid levels such as engine oil, coolant, brake fluid and window washer fluid as frequently as possible, or at least whenever you refuel. . Check that all windows and lights are clean. . Visually inspect tires for their appearance and condition. Also check tires for proper inflation. . Lock all doors. . Position seat and adjust head restraints. . Adjust inside and outside mirrors.
DRIVING THE VEHICLE GUID-04B77CD5-6D75-49CF-AB6F-F9F1077FB597 start. 5. To stop the engine, shift the selector lever to the P (Park) position and push the ignition switch to the OFF position. NOTE: Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone chargers, GPS, DVD players, etc.) 2.
shift to P (Park), D (Drive) or DS (Drive Sport) while vehicle is moving rearward. Failure to do so could cause you to lose control and have an accident. WARNING Apply the parking brake if the selector lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. CAUTION . . . Except in an emergency, do not shift to the N (Neutral) position while driving.
the selector lever to the P (Park) position. CAUTION Use this position only when the vehicle is completely stopped. R (Reverse): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Use this position to back up. Always be sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed and the selector lever button pushed in to move the selector lever from the P (Park) position, the N (Neutral) position or any drive position to the R (Reverse) position.
The transmission shifts to the lower range. down long slopes. When canceling the manual shift mode, return the selector lever to the D (Drive) position. The transmission returns to the normal driving mode. M When you pull the paddle shifter (if so equipped) while in the D (Drive) position, the transmission will shift to the upper or lower range temporarily. The transmission will automatically return to the D (Drive) position after a short period of time.
4. Push down the shift lock illustrated. should return to its normal operating condition. If it does not return to its normal operating condition, have an INFINITI retailer check the transmission and repair if necessary. B * as C and 5. Push the selector lever button * move the selector lever to N (Neutral) D position * while holding down the shift lock. Push the ignition switch to the ON position. Now the vehicle may be moved to the desired location.
PARKING BRAKE GUID-257948B5-20A0-48CE-9506-5664ADA8E8EF Control on downhill roads: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The adaptive shift control system shifts to a low gear that suits the degree of the slope, and uses the engine braking to reduce the number of times that the brake must be used.
LANE DEPARTURE WARNING (LDW) SYSTEM/LANE DEPARTURE PREVENTION (LDP) SYSTEMGUID-AB657AC3-44F0-4111-80FB-3866A16BCDB1 (if so equipped) The Lane Departure Warning (LDW) system/Lane Departure Prevention (LDP) system will operate when the vehicle is driven at speeds of approximately 45 MPH (70 km/h) and above, and when it is traveling close to either the left or the right of a traveling lane. Each system functions as follows: SPA2331 To apply: Fully depress the parking brake 1 . pedal * To release: 1.
The LDW and LDP systems monitor the lane markers on the traveling lane using the 1 located above the inside camera unit * mirror. When the camera unit detects that the vehicle is traveling close to either the left or the right of the traveling lane, the 2 lane departure warning light * on the instrument panel blinks in orange and a warning chime sounds.
. When traveling close to the vehicle in front of you, which obstructs the lane camera unit detection range. . When rain, snow or dirt adheres to the windshield in front of the lane camera unit. . When the headlights are not bright due to dirt on the lens or if the aiming is not adjusted properly. . When strong light enters the lane camera unit. (For example, the light directly shines on the front of the vehicle at sunrise or sunset.) . When a sudden change in brightness occurs.
1 on the warning systems ON indicator * systems switch illuminates. To cancel the LDW system, push the warning systems switch. The warning systems ON indicator will turn off. To turn on the system, push the warning systems switch again. When the warning systems switch is pushed, the FCW system will also turn on or off simultaneously. See“FCW system operation” (P.
— When driving on roads where the lane width is too narrow. — When driving without normal tire conditions (for example, tire wear, low tire pressure, installation of spare tire, tire chains, non-standard wheels). — When the vehicle is equipped with nonoriginal brake parts or suspension parts. — When you are towing a trailer. . If the LDP system malfunctions, it will cancel automatically. The lane departure warning light (orange) on the instrument panel will illuminate. .
the vehicle to the center of the traveling lane. The warning and assist functions will stop when the vehicle returns to a position inside of the lane marker. SSD0672 LDP ON indicator light (green)/ Warning light (orange) LDP systemGUID-A0FBDA55-1A13-4B54-8692-FD3F53246940 operation The LDP system provides a lane departure warning and brake control assistance when the vehicle is driven at speeds of approximately 45 MPH (70 km/h) and above.
Setting LDP system to ON/OFF: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 1 button and high1. Push the SETTING * light the “Driver Assistance” key on the display using the INFINITI controller. 2 button. Then push the ENTER * system will not turn on even if the dynamic driver assistance switch is pushed to on. To set the system to on or off on the display, see “Setting LDP system to ON/OFF” (P.527). 2. Highlight the “Dynamic Assistance set2 tings” key, and push the ENTER * button.
Automatic deactivation GUID-F669BA1F-0061-47C4-AD9A-CA7A381B2E67 Condition A: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The warning and assist functions of the LDP system are not designed to work under the following conditions: SSD0886 3. To set the LDP system to on or off, highlight the “Lane Departure Prevention” key, select ON or OFF and push 2 button.
era unit’s capability of detecting the lane markers. . Do not strike or damage the areas around the camera unit. Do not touch the camera lens or remove the screw located on the camera unit. If the camera unit is damaged due to an accident, contact an INFINITI retailer.
CRUISE CONTROL (if so equipped) GUID-3AF831C5-B9AE-429C-98EA-DD3D081712CA PRECAUTIONS ON CRUISE CONTROL GUID-C2EADEDF-B79F-40E7-9778-48FFABE14340 . If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the dot matrix crystal display will then blink to warn the driver. . If the engine coolant temperature becomes excessively high, the cruise control system will be canceled automatically. .
COAST/SET switch and release it. (The CRUISE SET indicator will come on in the instrument panel.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed. . To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. . The vehicle may not maintain the set speed on winding or hilly roads. If this happens, drive without the cruise control. To cancel the preset speed, follow any of these methods: 1.
INTELLIGENT CRUISE CONTROL (ICC) SYSTEM (FULL SPEED RANGE) (if so equipped) GUID-9419D013-FCF6-417B-973D-87903F341120 The Intelligent Cruise Control (ICC) system maintains a selected distance from the vehicle in front of you within the speed range of 0 to 90 MPH (0 to 144 km/h) up to the set speed. The set speed can be selected by the driver between 20 to 90 MPH (32 to 144 km/h). The vehicle travels at a set speed when the road ahead is clear. The ICC system can be set to one of two cruise control modes. .
SELECTING THE VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE GUID-73C83CCC-DF26-4F50-AD25-3E0D824851A8 To choose the vehicle-to-vehicle distance 1 , quickly push and release control mode * A . the MAIN switch * VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE GUID-1033BBEC-3D95-4F4A-AA90-4DFC7F7487F2 SSD0913 1. 2.
sary. The detection range of the sensor is approximately 390 ft (120 m) ahead. . Oncoming vehicles in the same lane . Motorcycles traveling offset in the travel lane WARNING WARNING JVS0124X . This system is only an aid to assist the driver and is not a collision warning or avoidance device. It is the driver’s responsibility to stay alert, drive safely and be in control of the vehicle at all times. . The system is primarily intended for use on straight, dry, open roads with light traffic.
conditions. To avoid accidents, never use the Intelligent Cruise Control system under the following conditions: — On roads where the traffic is heavy or there are sharp curves — When traffic conditions make it difficult to keep a proper distance between vehicles because of frequent acceleration or deceleration . Do not use the Intelligent Cruise Control system if you are towing a trailer. The system may not detect a vehicle ahead. .
traveling ahead. The sensor generally detects the signals returned from the reflectors on a vehicle ahead. Therefore, if the sensor cannot detect the reflector on the vehicle ahead, the ICC system may not maintain the selected distance. The following are some conditions in which the sensor cannot detect the signals: . When the reflector of the vehicle ahead is positioned high on the vehicle (trailer, etc.) . When the reflector on the vehicle ahead is missing, damaged or covered .
standstill with a warning chime. . When the vehicle traveling ahead has moved out from its lane of travel, the vehicle-to-vehicle distance control mode accelerates and maintains vehicle speed up to the set speed. The ICC system does not control vehicle speed or warn you when you approach stationary and slow moving vehicles. You must pay attention to vehicle operation to maintain proper distance from vehicles ahead when approaching toll gates or traffic congestion.
SSD0253 When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the ICC sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the ICC system to decelerate or accelerate the vehicle. The detection of vehicles may also be affected by vehicle operation (steering maneuver or traveling position in the lane, etc.) or vehicle condition.
4. DISTANCE switch: Changes the vehicle’s following distance: . Long . Middle . Short 5. MAIN (ON·OFF) switch: Master switch to activate the system SSD0914 Intelligent cruise control switch GUID-17F085DA-9D45-4B45-A9C6-44F2E0025210 The system is operated by a MAIN switch and four control switches, all mounted on the steering wheel. 1. ACCELERATE/RESUME switch: Resumes set speed or increases speed incrementally. 2. COAST/SET switch: Sets desired cruise speed, reduces speed incrementally. 3.
4. Indicates your vehicle 5. Set vehicle speed indicator: Indicates the set vehicle speed. For Canadian models, the speed is displayed in km/h. 6. Intelligent Cruise Control system warning light (orange): The light comes on if there is a malfunction in the ICC system. SSD0607 When the ignition switch is pushed to the ON position, the indicators come on as illustrated to check for a burned-out bulb, and it turns off when the engine is started.
. When the parking brake is applied . When the brakes are operated by the driver SSD0916 To set cruising speed, accelerate your vehicle to the desired speed, push the COAST/SET switch and release it. (Vehicle ahead detection indicator, set distance indicator and set vehicle speed indicator come on.) Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.
SSD0614 When the COAST/SET switch is pushed under the following conditions, the system cannot be set. A warning chime will sound and the ICC indicators will blink. . When the SNOW mode switch is ON (To use the ICC system, turn off the SNOW mode switch, push the MAIN switch to turn off the ICC and reset the ICC switch by pressing the MAIN switch again.) For details about the SNOW mode switch, see “Snow mode switch” (P.247). . When the VDC system is off (To use the ICC system, turn on the VDC system.
Vehicle detected ahead: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When a vehicle is detected in the lane ahead, the ICC system decelerates the vehicle by controlling the throttle and applying the brakes to match the speed of a slower vehicle ahead. The system then controls the vehicle speed based on the speed of the vehicle ahead to maintain the driver selected distance. The stoplights of the vehicle come on and the brake pedal depresses when braking is performed by the ICC system. SSD0610 1. 2.
How to change the set vehicle speed GUID-20E117B0-BF05-4A66-93D5-4A22FE20F309 the ICC system is in operation, the system controls the distance to that vehicle. When a vehicle is no longer detected under approximately 15 MPH (24 km/h), the system will be canceled. To cancel the preset speed, use any of these methods: SSD0611 When passing another vehicle, the set speed indicator will flash when the vehicle speed exceeds the set speed.
To reset at a slower cruising speed, use one of the following methods: . Lightly tap the brake pedal. When the vehicle attains the desired speed, push the COAST/SET switch and release it. . Push and hold the COAST/SET switch. The set vehicle speed will decrease by approximately 5 MPH (5 km/h for Canada). . Push, then quickly release the COAST/ SET switch. Each time you do this, the set speed will decrease by approximately 1 MPH (1 km/h for Canada).
and ICC system display. Decelerate by depressing the brake pedal to maintain a safe vehicle distance if: . The chime sounds. . The vehicle ahead detection and set distance indicator blink. The warning chime may not sound in some cases when there is a short distance between vehicles. Some examples are: . When the vehicles are traveling at the same speed and the distance between vehicles is not changing . When the vehicle ahead is traveling faster and the distance between vehicles is increasing .
Also, the sensor sensitivity can be affected by vehicle operation (steering maneuver or driving position in the lane) or traffic or vehicle condition (for example, if a vehicle is being driven with some damage). Automatic GUID-ABE70B6C-3B5C-4BED-A154-45426567DEC1 cancellation . When driving into a strong light (for example, sunlight) . When distance measurement becomes impaired due to adhesion of dirt or obstruction to the sensor .
Action to take: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When the conditions listed above are no longer present, turn the system off using the Intelligent Cruise Control MAIN Switch. Turn the ICC system back on to use the system. SSD0614 Warning light and display GUID-C81AFEED-63C2-4DE9-9167-6D1539AC39D1 Condition A: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 Under the following conditions, the Intelligent Cruise Control system is automatically canceled.
an INFINITI retailer. SSD0621 Condition C: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When the ICC system is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and set the ICC system again.
INFINITI retailer. . Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause failure or malfunction.
3. Cruise system warning light: Comes on if there is a malfunction in the cruise control system. SSD0618 Conventional (fixed speed) cruise control mode display and indicators GUID-078516D5-42A5-4906-9C7B-8E13AFD2CE68 The display is located between the speedometer and tachometer. 1. MAIN switch indicator: Indicates that the MAIN switch is ON. 2. Cruise set switch indicator: Displays while the vehicle speed is controlled by the conventional (fixed speed) cruise control mode of the ICC system.
To cancel the preset speed, use any of the following methods: set your desired cruising speed. Pushing the MAIN switch again will turn the system completely off. 1. Push the CANCEL button. The SET indicator will go out. When the ignition switch is pushed to the OFF position, the system is also automatically turned off.
the COAST/SET switch and release it. . When a wheel slips 2. Push and hold the COAST/SET switch. Release the switch when the vehicle slows down to the desired speed. 3. Push, then quickly release the COAST/ SET switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). To resume the preset speed, push and release the ACCELERATE/RESUME switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).
DISTANCE CONTROL ASSIST (DCA) SYSTEM (if so equipped) GUID-60933ED4-CE13-4B9A-AC58-63AE98E2A597 retailer.
The detection range of the sensor is approximately 390 ft (120 m) ahead. WARNING JVS0124X PRECAUTIONS ON DISTANCE CONTROL ASSIST SYSTEM GUID-31D93BDE-9B9D-4868-879E-F7B824453238 The system is intended to assist the driver to keep a following distance from the vehicle ahead traveling in the same lane and direction. A detects a slower If the distance sensor * moving vehicle ahead, the system will reduce the vehicle speed to help assist the driver to maintain a following distance.
the vehicle ahead, the DCA system may not operate. — When rain, snow or dirt adhere to the system sensor The following are some conditions in which the sensor cannot detect the signals: — On steep downhill roads (frequent braking may result in overheating the brakes) — On repeated uphill and downhill roads . Do not use the Distance Control Assist system if you are towing a trailer. The system may not detect a vehicle ahead. .
In these instances, the Distance Control Assist (DCA) system may not be able to decelerate the vehicle properly. Be sure to check and clean the sensor regularly. stationary and slow moving vehicles. You must pay attention to vehicle operation to maintain proper distance from vehicles ahead. The DCA system is designed to help assist the driver to maintain a following distance from the vehicle ahead.
SSD0252 The detection zone of the sensor is limited. A vehicle ahead must be in the detection zone for the system to operate. A vehicle ahead may move outside of the detection zone due to its position within the same lane of travel. Motorcycles may not be detected in the same lane ahead if they are traveling offset from the centerline of the lane. A vehicle that is entering the lane ahead may not be detected until the vehicle has completely moved into the lane.
SSD0253 When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the system to work inappropriately. The detection of vehicles may also be affected by vehicle operation (steering maneuver or traveling position in the lane, etc.) or vehicle condition.
mately 3 MPH (5 km/h). The light comes on if there is a malfunction in the DCA system. WARNING When the DCA system is not necessary, be sure to turn off the dynamic driver assistance switch. Using the system when it is not necessary may result in an accident. SSD1183 Operating Distance Control Assist (DCA) system GUID-4F5A6015-46BB-46C3-91FE-2B62D77CFBB3 To turn on the DCA system, push the dynamic driver assistance switch on the steering wheel after starting the engine.
Setting DCA system to ON/OFF: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 1 button and high1. Push the SETTING * light the “Driver Assistance” key on the display using the INFINITI controller. 2 button. Then push the ENTER * 2. Highlight the “Dynamic Assistance set2 tings” key, and push the ENTER * button. SSD0884 SSD0886 3. To set the DCA system to on or off, highlight the “Distance Control Assist” key, select ON or OFF and push the 2 button.
SSD0771 Under the following conditions, the Distance Control Assist system will not operate and the Distance Control Assist (DCA) system switch indicator light will blink: . When the SNOW mode switch is ON (To use the DCA system, turn off the SNOW mode switch, then turn on the dynamic driver assistance switch.) For details about the SNOW mode switch, see “Snow mode switch” (P.247). . When the VDC system is off (To use the DCA system, turn on the VDC, then push the dynamic driver assistance switch.
When vehicleGUID-D73A39BF-43C8-459F-9C24-47B7F579C407 approaches a vehicle ahead: . If the driver’s foot is not on the accelerator pedal, the system activates the brakes to decelerate smoothly as necessary. If the vehicle ahead comes to a stop, the vehicle decelerates to a standstill within the limitations of the system. . If the driver’s foot is on the accelerator pedal, the system moves the accelerator pedal upward to assist the driver to release the accelerator pedal. SSD0746 1. 2.
WARNING . When the vehicle ahead detection indicator light is not illuminated, system will not control or warn the driver. . Never place your foot under the brake pedal. Your foot may be caught when the system controls the brake. . Depending on the position of the accelerator pedal, the system may not be able to assist the driver to release the accelerator pedal appropriately. . If the vehicle ahead comes to a standstill, the vehicle decelerates to a standstill within the limitations of the system.
Also, the sensor sensitivity can be affected by vehicle operation (steering maneuver or driving position in the lane) or traffic or vehicle condition (for example, if a vehicle is being driven with some damage). SSD0284A SSD0771 NOTE: Automatic cancellation GUID-57BEFADF-F3F3-402E-82E3-46DB1ABDB630 The approach warning chime may sound and the system display may blink when A the sensor detects some reflectors * which are fitted on vehicles in other lanes or on the side of the road.
. When driving into a strong light (for example, sunlight) Action to take: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When the conditions listed above are no longer present, turn the system off with the dynamic driver assistance switch. Turn the DCA system back on to use the system. SSD0772 Condition B: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 When the sensor window is dirty, making it impossible to detect a vehicle ahead, the DCA system is automatically canceled.
FORWARD COLLISION WARNING (FCW) SYSTEM (if so equipped) GUID-9D0FF075-F758-4F25-807A-567019792C9D conditions, have the vehicle checked at an INFINITI retailer. Sensor maintenance GUID-F63B8BC7-76AF-4CF0-AE7C-656B1B653597 How to handle the sensor: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 The sensor for the DCA system is common with Intelligent Cruise Control and is located below the front bumper.
PRECAUTIONS ON FCW SYSTEM GUID-900DF3B0-1E06-4D16-AD92-2F3F31C98251 WARNING . . SSD1156 Warning systems switch The FCW system uses the distance sensor A located below the front bumper to * measure the distance to the vehicle ahead. When the system judges that your vehicle is getting close to the vehicle ahead in the travel lane, the vehicle ahead detection indicator light on the instrument panel blinks and a warning chime sounds. The FCW system will be turned on/off by pushing the warning systems switch.
sensor is covered with ice, a transparent or translucent plastic bag, etc., the system may not detect them. In these instances the system may not be able to warn the driver properly. Be sure to check and clean the sensor regularly. — When abruptly accelerating or decelerating. — On a steep downhill slope or on roads with sharp curves. . — When there is a highly reflective object near the vehicle ahead (for example, being very close to another vehicle, signboard, etc.) .
INTELLIGENT BRAKE ASSIST (IBA) SYSTEM (if so equipped) GUID-665A8ADA-374A-4EAF-A460-D7783922A131 warning systems switch. The warning systems ON indicator light will turn off. To turn on the system, push the warning systems switch again. When the warning systems switch is pushed, the LDW system will also turn on or off simultaneously. See “Lane Departure Warning (LDW) system/Lane Departure Prevention (LDP) system” (P.5-21).
A The IBA system uses a distance sensor * located below the front bumper to measure the distance to the vehicle ahead. When the system judges that your vehicle is getting close to the vehicle ahead in the traveling lane, the vehicle ahead detection indicator light on the instrument panel blinks and a warning chime sounds. The IBA system will be turned on/off by pushing the IBA OFF switch. The IBA OFF indicator light display will illuminate when the system is turned off.
system may detect highly reflective objects such as reflectors, signs, white markers, and other stationary objects on the road or near the traveling lane and provide unnecessary warning. road spray. — When visibility is low (such as rain, fog, snow, etc.). — When snow or road spray from traveling vehicles is splashed. — When dense exhaust or other smoke (black smoke) from vehicles reduces the visibility of the sensor.
system may not detect them. In these instances the system may not be able to warn the driver properly. Be sure to check and clean the sensor regularly. . Excessive noise will interfere with the warning chime sound, and the chime may not be heard. . Never place your foot under the brake pedal when the IBA system turns on. Your foot may be caught when the system controls the brake. .
BREAK-IN SCHEDULE GUID-BBE8A815-8277-48E0-B723-3E38508B3029 pushed again, the system will turn on and the IBA OFF indicator light will turn off. The IBA system will remain in the last ON or OFF state it was left in until it is manually changed by pressing the IBA OFF switch. Illumination of the IBA OFF indicator light without the warning chime sound is an indication that the IBA system is temporarily unavailable. It will occur under the following conditions: .
ALL-WHEEL DRIVE (AWD) (if so equipped) GUID-44459E62-6D34-4985-AA7E-DB14511A5AF5 If any malfunction occurs in the AWD system while the engine is running, the warning light will come on. The warning light may blink rapidly (about twice per second) while trying to free a stuck vehicle due to high power train oil temperature. The driving mode may change to two-wheel drive. If the warning light blinks rapidly during operation, stop the vehicle with the engine idling in a safe place immediately.
PARKING/PARKING ON HILLS GUID-DFDB9EA5-E13F-4559-98B4-938C338DC9E5 the AWD system. Reduce the vehicle speed and have your vehicle checked by an INFINITI retailer as soon as possible. . If the warning light remains on after the above operation, have your vehicle checked by an INFINITI retailer as soon as possible. . The power train may be damaged if you continue driving with the warning light blinking. SD1006MA WARNING 5-76 Starting and driving .
POWER STEERING GUID-69A8E429-58F0-4CCE-9B6D-523B3C9744B5 2. Move the selector lever to the P (Park) position. 3. To help prevent the vehicle from rolling into the street when parked on a sloping drive way, it is a good practice to turn the wheels as illustrated. . HEADED DOWNHILL WITH CURB: * 1 Turn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. .
BRAKE SYSTEM GUID-6DF590D4-0002-43C1-827E-52B2DE446E09 Set the Continuous Damping Control mode A for a select switch to the AUTO position * smooth ride. B Set the switch to the SPORT position * when you desire a quick response all the time. The SPORT mode indicator light will illuminate. BRAKING PRECAUTIONS GUID-EA2FD39A-BD9D-4E8E-AF4A-9322C69DA0C2 during braking. The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels.
BRAKE ASSIST GUID-01CCB45E-CD0C-45A3-8A40-83FF9D02ADC2 PARKING BRAKE BREAK-IN GUID-36411D19-F299-446A-83AC-A14A35BE9B8C Break in the parking brake shoes whenever the stopping effect of the parking brake is weakened or whenever the parking brake shoes and/or drums/rotors are replaced, in order to assure the best braking performance. This procedure is described in the vehicle service manual and can be performed by an INFINITI retailer.
. This system will not operate when the vehicle is moving at approximately 20 MPH (32 km/h) or less. . The pre-pressure function ceases when the following conditions are met: 1) When the driver depresses the accelerator pedal or the brake pedal. 2) If the driver does not operate the accelerator or brake pedal within approximately 1 second. all times. SSD0338 .
How to handle the sensor GUID-5632CECC-F890-4367-AFBB-85D65FBBD291 — Vehicle position in the lane may cause the sensor to temporarily not detect a vehicle in the same lane or may detect objects or vehicles in other lanes. The sensor for the Preview Function is common with Intelligent Cruise Control and is located below the front bumper.
ANTI-LOCK GUID-05BD6092-1B8E-4209-895B-C61E290C6BAD BRAKING SYSTEM (ABS) WARNING . . The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot prevent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking on slippery surfaces. Remember that stopping distances on slippery surfaces will be longer than on normal surfaces even with ABS.
VEHICLE DYNAMIC CONTROL (VDC) SYSTEM GUID-D67A8026-F86D-4968-84F4-BD8A6825F8E0 Normal operation GUID-073F731A-9A7E-4179-A85D-2D7BE89E5EE1 The ABS operates at speeds above 3 to 6 MPH (5 to 10 km/h). The speed varies according to road conditions. When the ABS senses that one or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly.
reset to on when the ignition switch is placed in the off position then back to the on position. bars, bushings and wheels are not INFINITI recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly. This could adversely affect vehicle handling performance, and the VDC warning light may illuminate. See “Vehicle Dynamic Control (VDC) warning light” (P.2-18) and “Vehicle Dynamic Control (VDC) off indicator light” (P.
REAR ACTIVE STEER SYSTEM (if so equipped) COLD WEATHER DRIVING GUID-A774F1A5-9918-4359-9334-8165D44064A0 GUID-FAC2ED51-CA52-4528-B158-8817EBFB6B45 The Rear Active Steer system is an electronically controlled four-wheel steering system. FREEING A FROZEN DOOR LOCK GUID-AC851344-BEA1-476B-965E-E02FA2886BDF The angle of the rear wheels are adjusted by the Rear Active Steer system, depending on the vehicle speed and steering angle.
TIRE EQUIPMENT GUID-1A7BBCE1-397B-4946-94A0-5BF38232E314 SPECIAL WINTER EQUIPMENT GUID-85D9615F-2E15-46C3-A083-8ABF8710732C SUMMER tires have a tread designed to provide superior performance on dry pavement. However, the performance of these tires will be substantially reduced in snowy and icy conditions. If you operate your vehicle on snowy or icy roads, INFINITI recommends the use of MUD & SNOW or ALL SEASON tires on all four wheels.
ENGINE BLOCK HEATER (if so equipped) GUID-16E27802-4A4A-4696-B0C2-99BC154BED39 Engine block heaters are used to assist with cold temperature starting. WARNING . Do not use your engine block heater with an ungrounded electrical system or a 2pronged adapter. You can be seriously injured by an electrical shock if you use an ungrounded connection. . Disconnect and properly store the engine block heater cord before starting the engine.
MEMO 5-88 Starting and driving
6 In case of emergency Hazard warning flasher switch ............................. ... Roadside assistance program .............................. ... Emergency engine shut off .................................. ... Flat tire................................................................ ... Tire Pressure Monitoring System (TPMS).......... ... Changing a flat tire ......................................... ... 6-2 6-2 6-3 6-3 6-3 6-4 Jump starting ...................................................... ...
HAZARD WARNING FLASHER SWITCH ROADSIDE ASSISTANCE PROGRAM GUID-625ECD32-3C69-42A6-A197-C5CDC9EA34AC GUID-8A4B8BE2-9A68-48E3-B588-BA5343A1DA47 . Turn signals do not work when the hazard warning flasher lights are on. The flasher can be actuated with the ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving. SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency conditions.
EMERGENCY ENGINE SHUT OFF FLAT TIRE GUID-84BCA28C-0818-44A2-B472-211FDD73486F GUID-56154336-6F9C-40A3-825E-5A5E88DAC7C3 To shut off the engine in an emergency situation while driving perform the following procedure: TIRE PRESSURE MONITORING SYSTEM (TPMS)GUID-9B66B09D-505A-46D8-9986-C762A481A3BD . Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or . Push and hold the push-button ignition switch for more than 2 seconds.
. Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CHANGING A FLAT TIRE GUID-FA679F87-F997-4151-B522-0DE43FDBA746 If you have a flat tire, follow the instructions below. Stopping the vehicle GUID-381E5766-03AF-4FD3-89C7-7ED8727FAD06 1. Safely move the vehicle off the road and away from traffic. WARNING . Make sure the parking brake is securely applied and the automatic transmission is in the P (Park) position. .
Jacking up the vehicle and removing the damaged tire GUID-814AF3D9-ACA5-4AFC-AC40-8774905BF685 WARNING SCE0766 Getting theGUID-0DFA8917-4964-498D-B184-9E0295C657AC spare tire and tools 1. Remove the cargo cover (if so equipped). See “Cargo cover” (P.2-56). 2. Raise the luggage room floor cover A , then hang it on using the handle * the edge of the luggage room opening B . using the hook * . Never get under the vehicle while it is supported only by the jack.
Carefully read the caution label attached to the jack body and the following instructions. SCE0771 Jack-up point 1. Place the jack directly under the jack-up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of the jack head between the notches as shown. The jack should be used on level firm ground.
SCE0504 SCE0661 2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. Installing the spare tire GUID-CF42A2BB-652A-43B4-A57C-ED927D7D7766 3. Carefully raise the vehicle until the tire clears the ground. To lift the vehicle, securely hold the jack lever and rod with both hands as shown above. Remove the wheel nuts, and then remove the tire. 1.
4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle completely. WARNING . Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. This could cause an accident. . Do not use oil or grease on the wheel studs or nuts. This could cause the nuts to become loose. .
JUMP STARTING GUID-D634C67C-A8EA-4F4B-B8C2-6543FA38779A To start your engine with a booster battery, the instructions and precautions below must be followed. . Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. . Do not attempt to jump start a frozen battery. It could explode and cause serious injury. .
WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. Remove the engine compartment cover, if necessary. See “Engine compartment check locations” (P.8-7). SCE0772 VQ37VHR engine 2. If the booster battery is in another A , position the two vehicles vehicle * A B ) to bring their batteries (* and * into close proximity to each other. Do not allow the two vehicles to touch. 3. Apply parking brake.
PUSH STARTING GUID-8F734789-4805-4E0C-92FB-50388D51A3B4 CAUTION . Always connect positive (+) to positive (+) and negative (−) to body ground (as illustrated) — not to the battery. . Make sure the jumper cables do not touch moving parts in the engine compartment and that clamps do not contact any other metal. 6. Start the engine of the booster vehicle A and let it run for a few minutes. * 7.
IF YOUR VEHICLE OVERHEATS GUID-677EEC53-B524-4F63-88AA-5536A89B6328 CAUTION . Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. . To avoid the danger of being scalded, never remove the radiator cap while the engine is still hot. When the radiator cap is removed, pressurized hot water will spurt out, possibly causing serious injury. . Do not open the hood if steam is coming out.
TOWING YOUR VEHICLE GUID-1937801A-8C43-4A34-98FB-067C4D2FEE47 When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. Towing instructions are available from an INFINITI retailer. Local service operators are familiar with the applicable laws and procedures for towing.
SCE0768 Two-wheel drive models TOWING RECOMMENDED BY INFINITI GUID-34DF7332-3927-4A5F-A5CB-1643FD04A697 Two-WheelGUID-C85BC796-4F54-47C4-A1DD-C031FAEA4A2E Drive (2WD) models INFINITI recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION .
SCE0736 All-wheel drive models All-Wheel Drive (AWD) models GUID-ED4C6466-2031-4B2E-A84B-2EAA13822FA0 INFINITI recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. JVE0038X CAUTION Never tow AWD models with any of the wheels on the ground as this may cause serious and expensive damage to the powertrain.
VEHICLE RECOVERY (freeing a stuck vehicle) GUID-07A45EE1-5A3F-4E29-AC26-C85B78AE7705 . WARNING . Stand clear of a stuck vehicle. . Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged. Pulling a stuck vehicle GUID-39E653E9-900F-47F5-885F-798EB29ECE5A If your vehicle is stuck in sand, snow, mud, etc., use a tow strap or other device designed specifically for vehicle recovery.
7 Appearance and care Cleaning exterior ................................................. ... Washing .......................................................... ... Waxing ............................................................ ... Removing spots ............................................... ... Underbody ...................................................... ... Glass............................................................... ... Wheels ...........................................................
CLEANING EXTERIOR GUID-7DA65DF6-984A-4FE6-81A9-B97E4987FE00 In order to maintain the appearance of your vehicle, it is important to take proper care of it. To protect the paint surface, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain . after driving on coastal roads . when contaminants such as soot, bird droppings, tree sap, metal particles or bugs get on the paint surface .
. Wax your vehicle only after a thorough washing. Follow the instructions supplied with the wax. . Do not use a wax containing any abrasives, cutting compounds or cleaners that may damage the vehicle finish. Machine compound or aggressive polishing on a base coat/clear coat paint finish may dull the finish or leave swirl marks.
CLEANING INTERIOR GUID-DE9D8124-DEFF-4BB6-A81E-2BB69F093795 ambient temperature. . Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME PARTS GUID-28FAC3FB-0B34-4D74-B52E-7428720F5196 Clean chrome parts regularly with a nonabrasive chrome polish to maintain the finish. TIRE DRESSING GUID-EA7B6EDA-07C1-4C18-98DA-E54E3BF3E5A5 INFINITI does not recommend the use of tire dressings.
CAUTION . Never use benzine, thinner, or any similar material. . Small dirt particles can be abrasive and damaging to the leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, detergents or ammonia-based cleaners as they may damage the leather’s natural finish. . Only use fabric protectors approved by INFINITI. . Do not use glass or plastic cleaner on meter or gauge lens covers. It may damage the lens cover.
cal solvents to clean the seat belts, since these materials may severely weaken the seat belt webbing. SAI0055 SAI0039 Floor mat positioning aid GUID-E56B69B7-55B5-4A96-AB92-03F37761DFB1 This model includes front floor mat brackets to act as floor mat positioning aid. NISSAN floor mats have been specially designed for your vehicle model. The front floor mats have grommet holes in them.
CORROSION PROTECTION GUID-066BD795-9CC4-4ADE-8C1C-ED6C1A7E3278 MOST COMMON FACTORS CONTRIBUTING TOGUID-EE337E21-AE9D-4463-8D40-C1336FD809DC VEHICLE CORROSION . The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. . Damage to paint and other protective coatings caused by gravel and stone chips or minor traffic accidents.
MEMO 7-8 Appearance and care
8 Maintenance and do-it-yourself Maintenance requirement .................................... ... 8-2 Scheduled maintenance .................................. ... 8-2 General maintenance....................................... ... 8-2 Where to go for service ................................... ... 8-2 General maintenance ........................................... ... 8-2 Explanation of maintenance items ................... ... 8-2 Maintenance precautions ..................................... ...
MAINTENANCE REQUIREMENT GENERAL MAINTENANCE GUID-226C1B86-67EB-4586-90B1-9230A1EC3F0C GUID-6D234818-99A3-4E79-AC55-3831D0E77D4C Some day-to-day and regular maintenance is essential to maintain your INFINITI’s fine mechanical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed.
is released. When driving in areas using road salt or other corrosive materials, check lubrication frequently. Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also check headlight aim. Road wheel nuts (lug nuts)*: When checking the tires, make sure no wheel nuts are missing, and check for any loose wheel nuts. Tighten if necessary.
seat adjusters, seatback recliner, etc. to ensure they operate smoothly and that all latches lock securely in every position. Check that the head restraints move up and down smoothly and that the locks (if so equipped) hold securely in all latched positions. Steering wheel: Check for changes in the steering conditions, such as excessive free play, hard steering or strange noises. Warning lights and chimes: Make sure that all warning lights and chimes are operating properly.
MAINTENANCE PRECAUTIONS GUID-9DA65E6F-BFE5-4ED0-B735-87C7784512BB those used on icy roads or to control dust. It is very important to remove these substances, otherwise rust will form on the floor pan, frame, fuel lines and around the exhaust system. At the end of winter, the underbody should be thoroughly flushed with plain water, being careful to clean those areas where mud and dirt may accumulate. For additional information, see “Cleaning exterior” (P.7-2).
are under high pressure even when the engine is off. CAUTION . Do not work under the hood while the engine is hot. Turn the engine off and wait until it cools down. . Avoid direct contact with used engine oil and coolant. Improperly disposed engine oil, coolant, and/or other vehicle fluids can damage the environment. Always conform to local regulations for disposal of vehicle fluid. This “8.
ENGINE COMPARTMENT CHECK LOCATIONS GUID-591BFA5B-ACC0-4C10-805D-84A972DE4007 SDI2262 VQ37VHR ENGINE GUID-A9A92F72-9984-4610-9A98-DDA348D7EADC 1. 2. 3. 4. 5. Fuse/fusible link holder Battery Radiator filler cap Engine oil dipstick Engine oil filler cap 6. 7. 8. 9. 10. 11.
SDI2263 VK50VE ENGINE GUID-DFD7D79A-6F21-4FB4-8FEC-7DC094004184 To remove the engine compartment covers, A located as illustrated. unhook the clips * To remove the engine cover, pull the cover 1 and then toward the front upward first * 2 .
ENGINE COOLING SYSTEM GUID-D578AF43-9C89-4D61-B7ED-7173E3DD4951 The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide yearround anti-freeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary. WARNING SDI2264 1. 2. 3. 4. 5. 6.
CAUTION . Never use any cooling system additives such as radiator sealer. Additives may clog the cooling system and cause damage to the engine, transmission and/or cooling system. . When adding or replacing coolant, be sure to use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent. Genuine NISSAN Long Life Antifreeze/Coolant (blue) is pre-diluted to provide antifreeze protection to −348F (−378C).
ENGINE OIL GUID-5210A6E6-C6B7-4FCD-AA09-0EDFFFC94B9C If the cooling system requires coolant frequently, have it checked by an INFINITI retailer. Engine coolant must be disposed of properly. Check your local regulations. CHANGING GUID-033EF515-5494-4AB1-84BA-077C94E5729B ENGINE COOLANT Major cooling system repairs should be performed by an INFINITI retailer. The service procedures can be found in the appropriate INFINITI Service Manual.
CHECKING ENGINE OIL LEVEL GUID-88F2BE58-218A-440E-9B33-A125F33C91B7 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn off the engine. Wait more than 15 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Reinsert it all the way. 5. Remove the dipstick again and check the oil level. It should be within the 1 .
Waste oil must be disposed of properly. . Check your local regulations. 4. (Perform steps 4 to 7 only when the engine oil filter change is needed.) . 2 with an oil filter Loosen the oil filter * wrench. Remove the oil filter by turning it by hand. 5. Wipe the engine oil filter mounting surface with a clean rag. SDI2335 VQ37VHR engine — 2WD models SDI2266 VK50VE engine Engine oil and filter GUID-C484B1D4-4796-401A-AB5C-5EEA342E054A 1. Place a large drain pan under the drain plug. 2.
8. Clean and re-install the drain plug with a new washer. Securely tighten the drain plug with a wrench. Drain plug tightening torque: 22 to 29 ft-lb (29 to 39 N·m) 11. Turn the engine off and wait more than 15 minutes. Check the oil level with the dipstick. Add engine oil if necessary. After the operation GUID-7C3C0239-7ED0-4AE3-A52F-2180EF497C43 1. Install the engine undercover into position as the following steps. Do not use excessive force. a. Pull the center of the small plastic clip out. 9.
AUTOMATIC TRANSMISSION FLUID GUID-57DE2F85-5B99-4BF8-8E37-3E09A9B16B2E POWER STEERING FLUID GUID-09E75EC1-1AD4-47E4-A931-D89C5B44A139 Contact an INFINITI retailer if replacement is required. CAUTION CAUTION . Use only Genuine NISSAN Matic S ATF. Do not mix with other fluids. .
BRAKE FLUID WINDOW WASHER FLUID GUID-2DDDC4D2-AE5E-46EC-B052-FE391115B3E2 GUID-0ABA4A17-3963-4E68-8380-8E5E3D7B6E5A For further brake fluid specification information, see “Capacities and recommended fuel/lubricants” (P.9-2) of this manual. WARNING . Use only new fluid from a sealed container. Old, inferior or contaminated fluid may damage the brake system. The use of improper fluids can damage the brake system and affect the vehicle’s stopping ability. .
BATTERY GUID-F3960FAE-D588-413D-8041-2482079DAD1F Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreeze. Follow the manufacturer’s instructions for the mixture ratio. Refill the reservoir more frequently when driving conditions require an increased amount of window washer fluid. Recommended fluid is Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent. CAUTION .
ated by the battery is explosive. Do not allow battery fluid to contact your skin, eyes, fabrics, or painted surfaces. After touching a battery or battery cap, do not touch or rub your eyes. Thoroughly wash your hands. If the acid contacts your eyes, skin or clothing, immediately flush with water for at least 15 minutes and seek medical attention. . Do not operate the vehicle if the fluid in the battery is low.
VARIABLE VOLTAGE CONTROL SYSTEM DRIVE BELTS GUID-05CDF06C-B4F9-4EF4-8E28-B9EF84AC9671 GUID-8EFC3123-4B89-4F5B-A796-63FB00FD5B0F JUMP STARTING GUID-40948495-A7CB-4589-B06B-B465B0A3334B If jump starting is necessary, see “Jump starting” (P.6-9). If the engine does not start by jump starting, the battery may have to be replaced. Contact an INFINITI retailer. CAUTION . Do not ground accessories directly to the battery terminal.
SPARK PLUGS GUID-5185F31D-BAF7-44C6-B33E-3321ADFDFCAF ess. If the belt is in poor condition or loose, have it replaced or adjusted by an INFINITI retailer. 2. Have the belts checked regularly for condition and tension in accordance with the maintenance schedule in your “INFINITI Service and Maintenance Guide”. WARNING Be sure the engine and the ignition switch are off and that the parking brake is engaged securely. CAUTION SDI1411B 1. 2. 3. 4. 5.
AIR CLEANER GUID-1D2058ED-A85C-4A74-99D6-E47E69B6E892 Always replace spark plugs with recommended or equivalent ones. SDI2020 REPLACING GUID-72A1B54E-E710-47A8-83D4-3549078FDD28 SPARK PLUGS If replacement is required, see an INFINITI retailer for servicing. Iridium-tipped spark plugs GUID-6A0A8CDC-45E6-43BA-9D94-7B44EC872AD0 It is not necessary to replace the iridiumtipped spark plugs as frequently as the conventional type spark plugs since they will last much longer.
WINDSHIELD WIPER BLADES GUID-D93761D7-59ED-4282-8998-764FDC2F88AC wipe the inside of the air cleaner housing and the cover with a damp cloth. WARNING . . Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner not only cleans the air, it stops flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the air cleaner removed.
SDI2048 REPLACINGGUID-AD379CCA-9AF2-4BC3-8BBE-76D4568A2624 CAUTION Replace the wiper blades if they are worn. 1. Pull the wiper arm. A , and then 2. Push the release tab * move the wiper blade down the wiper 1 while pushing the release tab arm * to remove. . 3. Insert the new wiper blade onto the wiper arm until a click sounds. . 4. Rotate the wiper blade so the dimple is in the groove.
REAR WINDOW WIPER BLADES GUID-0113D1DF-9C7F-426E-BFC2-6791CF890827 Contact an INFINITI retailer if checking or replacement is required. BRAKES GUID-4E660802-2B18-4F2E-BA05-680E29FD0E98 If the brakes do not operate properly, have the brakes checked by an INFINITI retailer. SELF-ADJUSTING BRAKES GUID-9B64AAF3-64AC-4DFC-A400-5537D306079D Your vehicle is equipped with self-adjusting brakes. The disc-type brakes self-adjust every time the brake pedal is applied.
FUSES GUID-1FFE3F37-9A0E-403A-AB85-F46C763F61A1 2. Open the engine hood and remove the cover on the battery. 3. Remove the fuse/fusible link holder cover. 4. Remove the fuse with the fuse puller. SDI1479A ENGINE COMPARTMENT GUID-52624265-87A7-4571-8C28-08C50EC3EF99 CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1.
SDI2704 SDI2034 PASSENGERGUID-9F151796-01BF-4EB6-89CB-D2932E45E349 COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch is pushed to the OFF or LOCK position and the headlight switch is turned to OFF. 8-26 Maintenance and do-it-yourself 2. Open the fuse box lid. 3.
INTELLIGENT KEY BATTERY REPLACEMENT GUID-C26BD3DD-C31B-406C-B9E9-1FBAAEABFC84 case, remove the extended storage switch and replace it with a new fuse of the same rating. How to remove the extended storage switch: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407 1. To remove the extended storage switch, be sure the ignition switch is in the OFF or LOCK position. CAUTION Be careful not to allow children to swallow the battery and removed parts. 2. Be sure the headlight switch is in the OFF position. 3.
ence received, including interference that may cause undesired operation. the upper part from the lower part. 3. Replace the battery with a new one. NOTE: Recommended battery: CR2032 or equivalent. . Do not touch the internal circuit and electric terminals as it could cause a malfunction. . Hold the battery by the edges. Holding the battery across the contact points will seriously deplete the storage capacity. . Make sure that the + side faces the bottom of the case.
LIGHTS GUID-9C564204-F2FB-40D8-AD0D-9E2E9A9E424C 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
HEADLIGHTS GUID-4AD3ECC7-3D82-48E2-B8AE-10CFFBF7F486 Replacing EXTERIOR AND INTERIOR LIGHTS GUID-60D504DD-FB69-4A8B-B1AE-63FF7F412A5A Item GUID-473483AB-2DF6-4F55-AB96-7C071B73F17A Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact an INFINITI retailer.
Replacement procedures GUID-BC03F8C1-99EA-4AAD-A381-341D7579A20F All other lights are either type A, B, C, D, E or F. When replacing a bulb, first remove the lens and/or cover.
WHEELS AND TIRES GUID-C9D0BB2A-393E-4E74-924C-613E773CAD1A If you have a flat tire, see “Flat tire” (P.63). TIRE PRESSURE GUID-78198506-E051-440E-A60D-6844A6ED8029 Tire Pressure Monitoring System (TPMS) GUID-6D695B32-5EAB-4CE1-A6B7-DF027C985ED6 SDI1500B Cargo light This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare.
WARNING . Improperly inflated tires can fail suddenly and cause an accident. . The Gross Vehicle Weight rating (GVWR) is located on the F.M.V.S. S./C.M.V.S.S. certification label. The vehicle weight capacity is indicated on the Tire and Loading Information label. Do not load your vehicle beyond this capacity. Overloading your vehicle may result in reduced tire life, unsafe operating conditions due to premature tire failure, or unfavorable handling characteristics and could also lead to a serious accident.
ered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.6 km) at moderate speeds. The recommended cold tire inflation is set by the manufacturer to provide the best balance of tire wear, vehicle handling, driveability, tire noise, etc., up to the vehicle’s GVWR. * 5 Tire size — see “Tire labeling” (P.8-36).
SDI1949 Checking the tire pressure GUID-8E0E69DD-16D5-4BB2-81F8-419999A87B5D 1. Remove the valve stem cap from the tire. 2. P r e s s t h e p r e s s u r e g a u g e squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove the gauge. 4.
4. 5. 6. SDI1575 Example TIRE LABELING GUID-C06F0174-1C35-4FD5-9775-02BD3370873A Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall.
SDI1607 * 2 Example TIN (Tire Identification Number) for a new tire (example: DOT XX XX XXX XXXX) 1. DOT: Abbreviation for the “Department of Transportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. Two-digit code: Manufacturer’s identification mark 3. Two-digit code: Tire size 4. Three-digit code: Tire type code (Optional) 5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and year the tire was built.
bears white lettering or bears manufacturer, brand and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or (2) the outward facing sidewall of an asymmetrical tire that has a particular side that must always face outward when mounted on a vehicle. TYPES OF TIRES GUID-15388D9E-36C3-4875-A608-ADADAE22690F WARNING . . . When changing or replacing tires, be sure all four tires are of the same type (Example: Summer, All Season or Snow) and construction.
TIRE CHAINS GUID-72A4B18E-532D-4B95-B54E-0D219FBB6687 Use of tire chains may be prohibited according to location. Check the local laws before installing tire chains. When installing tire chains, make sure they are the proper size for the tires on your vehicle and are installed according to the chain manufacturer’s suggestions. Use only SAE Class S chains. Class “S” chains are used on vehicles with restricted tire to vehicle clearance.
The wheel nuts must be kept tightened to the specification at all times. It is recommended that wheel nuts be tightened to the specification at each tire rotation interval. WARNING . After rotating the tires, check and adjust the tire pressure. . Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). . Do not include the T-type spare tire or any other small size spare tire in the tire rotation. .
Replacing wheels and tires GUID-50D27E9A-C359-494D-A9B1-ACD968EE6ABE When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. (See “Specifications” (P.9-8) for recommended types and sizes of tires and wheels.) WARNING . .
placed with tires of the same size, brand, construction and tread pattern. The tire pressure and wheel alignment should also be checked and corrected as necessary. Contact an INFINITI retailer. not function. Observe the following precautions if the Ttype spare tire must be used, otherwise your vehicle could be damaged or involved in an accident. Wheel balance GUID-84CA0E50-F38E-4E24-835E-33BF7157AA2A Unbalanced wheels may affect vehicle handling and tire life.
. Because the TEMPORARY USE ONLY spare tire is smaller than the original tire, ground clearance is reduced. To avoid damage to the vehicle, do not drive over obstacles. Also do not drive the vehicle through an automatic car wash since it may get caught.
MEMO 8-44 Maintenance and do-it-yourself
9 Technical and consumer information Capacities and recommended fuel/lubricants ....... ... 9-2 Fuel recommendation ...................................... ... 9-4 Engine oil and oil filter recommendation ......... ... 9-6 Air conditioning system refrigerant and lubricant recommendations ............................. ... 9-7 Specifications ...................................................... ... 9-8 Engine ............................................................. ... 9-8 Wheels and tires ..............
CAPACITIES AND RECOMMENDED FUEL/ LUBRICANTS GUID-48931BE6-8CB1-42AD-9316-C84EE80464B2 The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity.
*1: For additional information, see “Engine oil” (P.8-11) for changing engine oil. *2: INFINITI recommends Genuine NISSAN Ester Engine Oil available at INFINITI retailers. *3: Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the INFINITI new vehicle limited warranty.
FUEL RECOMMENDATION GUID-9FE4EF10-75DC-47EE-817B-C3BE5AF491FA . Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If premium gasoline is not available, unleaded regular gasoline with an octane rating of 87 AKI number (Research octane number 91) may be temporarily used, but only under the following precautions: .
15%.) . E-15 fuel contains more than 10% oxygenate. E-15 fuel will adversely affect the emission control devices and systems of the vehicle and should not be used. Damage caused by such fuel is not covered by the INFINITI new vehicle limited warranty. . If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol). It should also contain a suitable amount of appropriate cosolvents and corrosion inhibitors.
above symptoms are encountered, have your vehicle checked at an INFINITI retailer or other competent service facility. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is no cause for concern, because you get the greatest fuel benefit when there is light spark knock for a short time under heavy engine load. JVT0116X 1. 2.
Oil which may contain foreign matter or has been previously used should not be used. filter quality and/or viscosity is not covered by the new INFINITI vehicle limited warranties. Oil viscosity GUID-F3855EFB-B07A-438C-BCBB-413373B28445 Your engine was filled with a high quality engine oil when it was built. You do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle.
SPECIFICATIONS GUID-9871FDBA-D97A-4878-B5F8-F5BF185B27FF Contact an INFINITI retailer when servicing your air conditioning system. ENGINE GUID-CA2E3267-31C6-4935-A9C5-1AD5B4A6552D Model VK50VE VQ37VHR Type Gasoline, 4-cycle 8-cylinder, V-slanted at 908 3.760 6 3.453 (95.5 6 87.7) 306.7 (5,026) 1-8-7-3-6-5-4-2 Gasoline, 4-cycle 6-cylinder, V-slanted at 608 3.760 6 3.385 (95.5 6 86.0) 225.
WHEELS AND TIRES GUID-D638F2F8-DA49-4C08-83F7-562AED633CC3 Road wheelGUID-CAE1A699-BCE5-4A3E-8A71-5956FB428C41 Type Size Offset in (mm) 18 6 8J Conventional 20 6 8J 1.97 (50) 21 6 9-1/2J Spare 18 6 4-1/2T 1.18 (30)/0.
DIMENSIONS GUID-2D600776-9DE1-495C-9B09-FD7C708BD79F Overall length (With front license plate) Overall width Overall height Front tread Rear tread Wheelbase *1: Model without roof rack *2: Model with roof rack 9-10 Technical and consumer information in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) 191.3 (4,860) 75.9 (1,925) 65.0 (1,650)*1 66.1 (1,680)*2 64.4 (1,635) 64.6 (1,640) 113.
WHEN TRAVELING OR REGISTERING YOUR VEHICLE IN ANOTHER COUNTRY GUID-2219A828-FF43-4C5E-8727-2B7B70127420 VEHICLE IDENTIFICATION GUID-7AF738ED-4EF7-4A6E-B6AB-A911475C7BFB If you plan to travel in another country, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
ENGINE SERIAL NUMBER GUID-EE9E0254-9A46-4729-A2D4-B56B1F343430 The number is stamped on the engine as shown. STI0584 VK50VE engine STI0448 F.M.V.S.S./C.M.V.S.S. CERTIFICATION LABELGUID-46B1ABAE-E1E2-46A1-A0B4-F366EF7A1503 The Federal/Canadian Motor Vehicle Safety Standards (F.M.V.S.S./C.M.V.S.S.) certification label is affixed as shown.
STI0422 STI0373 STI0495 EMISSION CONTROL INFORMATION LABEL GUID-272AD403-9633-4959-87B5-5695C542AF87 TIRE AND LOADING INFORMATION LABEL GUID-658A04C7-A37F-4A12-AC64-F251B17B1022 AIR CONDITIONER SPECIFICATION LABEL GUID-ADCFB1CA-1E95-4B6B-AA9B-B1A3650B0613 The emission control information label is attached as shown. The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. The air conditioner specification label is attached as shown.
INSTALLING FRONT LICENSE PLATE GUID-668278F1-1E9D-42E6-8C9E-2CCF21C37E2B Use the following steps to mount the license plate. Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. Only use the recommended mounting position, otherwise Intelligent Cruise Control (ICC) sensor obstruction (if so equipped) may result. . . . . 1. License plate bracket J-nut 6 2 Screw 6 2 Screw grommet 6 2 Park the vehicle on flat, level ground. A 2.
VEHICLE LOADING INFORMATION GUID-C4FA74CC-1F05-48F9-BF22-DBF7AC5BAC7A 5. Insert grommets into the hole on the fascia. 6. Insert a flat-blade screwdriver into the grommet hole to add 908 turn onto the E . part * 7. Insert a J-nut into the license plate bracket before placing the license plate bracket on the fascia. 8. Install the license plate bracket with screws. 9. Install the license plate with bolts that are no longer than 0.55 in (14 mm).
of the load (passengers and cargo) for the vehicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be included as part of the cargo load. This information is located on the Tire and Loading Information label. . Cargo capacity - permissible weight of cargo, the weight of total occupants weight subtracted from the load limit.
VEHICLE LOAD CAPACITY GUID-FB0AE9D8-2912-40C9-99F6-E501B3AC2449 Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Loading Information label. To get “the combined weight of occupants and cargo”, add the weight of all occupants, then add the total luggage weight. Examples are shown in the illustration.
the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. SIC3849 SECURING THE LOAD GUID-F6084B6B-3E67-44EC-BE8D-E9432D2288E3 There are tie down hooks located in the cargo area as shown. The tie down hooks can be used to secure cargo with ropes or other types of straps. Do not apply a total load of more than 22 lb. (98 N) to a single hook when securing cargo. WARNING . Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting.
TOWING A TRAILER GUID-3C1AB11D-0F45-45FA-933F-EDBD8DDEAE36 serious accident and personal injury. Failures caused by overloading are not covered by the vehicle’s warranty. MEASUREMENT OF WEIGHTS GUID-FF731B9F-26FE-4448-9DAA-A440EB7F1BB4 Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads.
towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The transmission high fluid temperature protection mode, which helps reduce the chance of transmission damage, could activate and automatically decrease engine power. Vehicle speed may decrease under high load. Plan your trip carefully to account for trailer and vehicle load, weather and road conditions.
Towing capacities are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load. The vehicle and trailer need to be weighed to confirm the vehicle is within the GVWR, Front GAWR, Rear GAWR, Gross Combined Weight Rating (GCWR) and Towing capacity.
available maximum tongue load. To determine the available towing capacity, use the following procedure. 1. Find the GCWR for your vehicle on the “Towing Load/Specification” chart found later in this section. 2. Subtract the actual vehicle weight from the GCWR. The remaining amount is the available maximum towing capacity. To determine the Gross Trailer Weight, weigh your trailer on a scale with all equipment and cargo, that are normally in the trailer when it is towed.
TOWING LOAD/SPECIFICATION GUID-9DEAF7DC-13F1-45B3-AD70-83B558B3FB7B TOWING SAFETY GUID-502AD8CF-53DB-4BD3-B0C3-603BB71C8E5B TOWING LOAD/SPECIFICATION CHART Unit: lb (kg) MAXIMUM TRAILER WEIGHT*1 MAXIMUM TONGUE LOAD GROSS COMBINED WEIGHT RATING RECOMMENDED EQUIPMENT*2 1: 2: 3: 4: VQ37VHR VK50VE Two-Wheel Drive (2WD) All-Wheel Drive (AWD) model model All-Wheel Drive (AWD) model — 2,000 (907)*3 3,500 (1,588)*4 3,500 (1,588) — 200 (91)*3 350 (159)*4 350 (159) — 7,355 (3,336)*3 8,825 (4,003)*4
of the ball. . Choose the proper class hitch ball based on the trailer weight. . The diameter of the threaded shank of the hitch ball must be matched to the ball mount hole diameter. The hitch ball shank should be no more than 1/16 smaller than the hole in the ball mount. . The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least 2 threads showing beyond the lock washer and nut.
to the hitch, not to the vehicle bumper or axle. The safety chains can be attached to the bumper if the hitch ball is mounted to the bumper. Be sure to leave enough slack in the chains to permit turning corners. Trailer lights GUID-1CCD0FE7-6819-4DAE-9A10-4FBDB197405F hooking up trailer lights, contact an INFINITI retailer or reputable trailer retailer.
inadvertently becoming unlatched. . Avoid abrupt starts, acceleration or stops. . Avoid sharp turns or lane changes. . Always drive your vehicle at a moderate speed. Some states or provinces have specific speed limits for vehicles that are towing trailers. Obey the local speed limits. . When backing up, hold the bottom of the steering wheel with one hand. Move your hand in the direction in which you want the trailer to go. Make small corrections and back up slowly.
ling. If swaying does occur, firmly grip the steering wheel, steer straight ahead, and immediately (but gradually) reduce vehicle speed. This combination will help stabilize the vehicle. Never increase speed. Do the following if the trailer begins to sway: 1. Take your foot off the accelerator pedal to allow the vehicle to coast and steer as straight ahead as the road conditions allow. This combination will help stabilize the vehicle. . Do not correct trailer sway by steering or applying the brakes. 2.
UNIFORM TIRE QUALITY GRADING GUID-D27865F7-1A35-45B1-BDA7-03315092F58C . . DO NOT tow an All-Wheel Drive (AWD) vehicle with any of the wheels on the ground. Doing so may cause serious and expensive damage to the powertrain. For emergency towing procedures refer to “Towing recommended by INFINITI” (P.6-14) of this manual.
EMISSION CONTROL SYSTEM WARRANTY GUID-553C46D2-2165-497F-BCEB-7ABD58FBA4B8 tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded.
REPORTING SAFETY DEFECTS GUID-A35A5D9A-E5FD-442E-B85E-832B378D5E4D For USA If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying INFINITI. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
READINESS FOR INSPECTION/ MAINTENANCE (I/M) TEST EVENT DATA RECORDERS (EDR) GUID-C151B503-0A3F-49A6-AEAC-8F28390506AF A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipment. Make sure you inform test facility personnel that your vehicle is equipped with AWD before it is placed on a dynamometer.
OWNER’S MANUAL/SERVICE MANUAL ORDER INFORMATION GUID-3ED68FB2-D2E1-4482-B4A3-30238D123257 crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation. To read data recorded by an EDR, special equipment is required and access to the vehicle or the EDR is needed.
10 Index A ABS (Anti-lock Braking System) ......................... ... 5-82 Adaptive front lighting system (AFS) .................. ... 2-41 Adaptive shift control (ASC) .............................. ... 5-19 Advanced air bag system .................................. ... 1-43 Aiming control, Adaptive front lighting system (AFS) ..................................................... ... 2-41 Air bag system Advanced air bag system ............................. ...
Cargo light ........................................................ ... 2-65 Cargo net .......................................................... ... 2-55 Catalytic converter, Three way catalyst ................ ... 5-3 CD/CF/USB memory care and cleaning ............. ... 4-90 Center multi-function control panel ..................... ... 4-3 Child restraints ................................................. ... 1-20 Booster seats ............................................... ... 1-34 LATCH system .......
If your vehicle overheats .............................. ... 6-12 Starting the engine ...................................... ... 5-14 Entry/exit function, Automatic drive positioner ... ... 3-32 Event Data Recorders (EDR) ............................... ... 9-31 Exhaust gas (carbon monoxide) .......................... ... 5-3 F F.M.V.S.S./C.M.V.S.S. certification label ............. ... 9-12 Filter Air cleaner housing filter .............................. ... 8-21 Changing engine oil and filter ...........
Lights .......................................................... ... 2-18 INFINITI Vehicle Immobilizer System .................. ... 2-32 INFINITI voice recognition system .................... ... 4-119 INFO button ........................................................ ... 4-9 Inside mirror ..................................................... ... 3-29 Inspection/maintenance (I/M) test .................... ... 9-31 Instrument brightness control ........................... ... 2-42 Instrument panel ......
Low washer fluid warning ................................. ... 2-25 Luggage hooks ................................................. ... 2-54 N M Net, Cargo net .................................................. ... 2-55 New vehicle break-in ......................................... ... 5-74 No key warning ................................................. ... 2-24 Maintenance Battery ......................................................... ... 8-17 General maintenance ...................................
Preview Function warning light .......................... ... 2-17 Push starting .................................................... ... 6-11 “PUSH” warning ... ............................................... 2-24 Push-button ignition switch ..................... ... 5-11, 5-12 R Radio ................................................................ ... 4-54 Car phone or CB radio ................................. ... 4-93 FM-AM-SAT radio with Compact Disc (CD) player ......................................
Rear Active Steer system ............................. ... 5-85 Steering-wheel-mounted controls for audio ...................................................... ... 4-91 Tilt/telescopic steering ................................. ... 3-27 Storage ............................................................. ... 2-50 Sun visors ........................................................ ... 3-28 Sunglasses holder ............................................ ... 2-51 Supplemental air bag warning labels ..........
Vehicle Dimensions .................................................. ... 9-10 Identification number (VIN) .......................... ... 9-11 Loading information ..................................... ... 9-15 Recovery (freeing a stuck vehicle) ................ ... 6-16 Security system ........................................... ... 2-30 Vehicle dynamic control (VDC) off switch ...... ... 2-48 Vehicle dynamic control (VDC) system .......... ... 5-83 Vehicle information and settings (display) ...... ...
MEMO 10-9
11 Gas station information GAS STATION INFORMATION GUID-82EC6D6E-24CE-4796-8CB6-34CFC2CA3F26 FUEL RECOMMENDATION: GUID-6E0A95CF-9B90-42E5-963A-62586B3D6FA4 Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). . Under no circumstances should a leaded gasoline be used, because this will damage the three-way catalyst. . Do not use E-15 or E-85 fuel in your vehicle. Your vehicle is not designed to run on E-15 or E-85 fuel.
Printing: June 2012 (12) / OM3E 0S51U0 / Printed in U.S.A. 2013 Infiniti FX 1179129 EN Infiniti FX OM.indd 1 For your safety, read carefully and keep in this vehicle.
