Operation Manual

(171,1)
[ Edit: 2015/ 6/ 25 Model: S51-D ]
. pushing the power lift gate switch
*
D
on the lower part of the lift gate
The outside chime sounds when the lift
gate starts to reverse.
The power lift gate button
*
C
on the
Intelligent Key cannot be operated when
the ignition switch is in the ON position.
Auto reverse function
GUID-EC8F1C01-9FE1-4B41-9A22-0A678FDFA5A1
The auto-reverse function enables the lift
gate to automatically reverse when some-
thing is caught in the lift gate as it is
opening or closing. When the control unit
detects an obstacle, the lift gate will
reverse and return to the full open or full
close position.
If a second obstacle is detected, the lift
gate motion will stop and the drive motor
will disengage. The lift gate will enter the
manual mode.
A pinch sensor is mounted on each side of
the lift gate. If an obstacle is detected by
the pinch sensor during power close, the
lift gate will reverse and return to the full
open position immediately.
NOTE:
If the pinch sensor is damaged or removed,
the power close function will not operate.
WARNING
There is a small distance immediately before
the closed position that cannot be detected.
Make sure that all passengers keep their
hands, etc., clear from the lift gate opening
before closing the lift gate.
SPA2879
Pre-driving checks and adjustments 3-21
Condition: