Instruction Manual

Compositions Overture OVTR 2/OVTR 3 – Owner’s Manual
1
3-WAY FLOOR-STANDING
SPEAKERS WITH
INTEGRATED POWERED
SUBWOOFERS...
A
BOUT THIS MANUAL...
P
ARTS LIST...
T
OOLS AND SUPPLIES
(NOT ENCLOSED)...
INTRODUCTION
Infinity Compositions Overture OVTR 2 and OVTR 3 speaker systems
are a pair of advanced, 3-way full-range, floor-standing speakers with
integrated powered subwoofers. Housed in slender columns, these
highly-efficient speakers require only minimal power to produce sound
levels greater than those heard in a movie theater. Moreover, even
though they excel at reproduction of front left and right home-theater
channels, you’ll find these speakers also provide the highest musical
fulfillment when listening to CDs, LPs, or tapes.
To start enjoying your new Compositions Overture speakers, first read
and then perform all instructions listed in this manual, as well as those
found in the owner’s manuals of associated components in your audio system.
Also, please read the enclosed Important Safety Instructions for detailed
safety precautions. Save all instructions for future reference. These speakers
are covered by a limited five-year warranty (see page 12), so save the bill of
sale to protect your purchase and aid in any service-related questions.
UNPACKING THE SPEAKERS
Finish unpacking each speaker box. If you suspect damage from transit,
report it immediately to your dealer and/or delivery service. Keep the
shipping cartons and packing materials for future use. Open each
accessory pack and verify the following contents:
(4) Feet
(4) Locking Nuts
(4) Nylon Domes
(1) Wrench
(2) Spare 5 A (250 V) Fuses for OVTR 2 or
(2) Spare 5A (250V) Fuses for OVTR 3
Owner’s Manual (P/N 331350-001) and Warranty Registration Card
You may also need the following tools and supplies:
High-quality speaker wire (also see Wiring The System on page 5)
Wire strippers
Small flat-blade screwdriver (for fuse replacement, if needed)
(4) Banana plugs or spade terminals (optional)
Level (optional for adjusting feet)
Overture 2/3 Ins 9/11/98 4:23 PM Page 1