Beta 10-20-40-50-C250-C360 OM 6/30/04 3:45 PM Page 3 INFINITY BETA SPEAKER SYSTEMS ™ Owner’s Guide Beta 10 Beta 20 Beta 40 Beta 50 Beta C250 Beta C360
Beta 10-20-40-50-C250-C360 OM 6/30/04 3:45 PM Page 4 INFINITY BETA SERIES Home Theater The Infinity Beta™ Series of loudspeakers continues Infinity’s longstanding commitment to accurate sound reproduction.
Beta 10-20-40-50-C250-C360 OM 6/30/04 3:45 PM Page 5 INSTALLING FEET Beta 40 and Beta 50 These models feature four rubber feet, which enables them to be placed on a smooth-surfaced floor, such as tile or hardwood. Four metal spikes are supplied for use when the speaker is to be placed on a carpeted surface, to decouple the speaker from the floor and prevent unwanted damping.To insert the spikes, gently lay the speaker on its side (not its front or back) on a soft, nonabrasive surface.
Beta 10-20-40-50-C250-C360 OM 6/30/04 3:45 PM Page 6 WIRING THE SYSTEM Beta 40 and Beta 50 IMPORTANT: Make sure all equipment is turned off before making any connections. For speaker connections, use a high-quality speaker wire with polarity coding.The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., +). NOTE: If desired, consult your local Infinity dealer about speaker wire and connection options.
Beta 10-20-40-50-C250-C360 OM 6/30/04 3:45 PM Page 7 BI-WIRING FINAL ADJUSTMENTS The outer connection panel and internal dividing network of the Beta 40 and Beta 50 are designed so that separate sets of speaker cables can be attached to the low-frequency transducer and midrange/highfrequency transducer portions of this dividing network.This is called bi-wiring. Bi-wiring can provide several sonic advantages and considerably more flexibility in power amplifier selection.
Beta 10-20-40-50-C250-C360 OM 6/30/04 3:45 PM Page 8 SPECIFICATIONS Beta 10 Beta 20 Beta 40 60Hz – 20kHz (±3dB) 55Hz – 40kHz (– 6dB) 58Hz – 20kHz (±3dB) 52Hz – 40kHz (– 6dB) 45Hz – 20kHz (±3dB) 40Hz – 40kHz (– 6dB) Recommended Amplifier Power Range: 10 – 125 Watts 10 – 150 Watts 10 – 200 Watts Sensitivity: 88dB 90dB 91dB Nominal Impedance: 8Ω 8Ω 8Ω Crossover Frequency: 3.4kHz; 12dB/octave 2.4kHz; 12dB/octave 600Hz, 18dB/octave; 3.
Beta 10-20-40-50-C250-C360 OM 6/30/04 3:45 PM Page 9 NOTES Declaration of Conformity We, Harman Consumer International 2, route de Tours 72500 Chateau-du-Loir France declare in own responsibility that the products described in this owner’s manual are in compliance with technical standards: EN 61000-6-3:2001 EN 61000-6-1:2001 Robin Marshall Harman Consumer International Chateau-du-Loir, France 7/04 BETA SPEAKER SYSTEMS 7
Beta 10-20-40-50-C250-C360 OM 6/30/04 3:45 PM Page 2 © 2004 Harman International Industries, Incorporated Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4INF (4463) www.infinitysystems.com Infinity is a registered trademark, and Infinity Beta and CMMD (patent nos. 6,327,372 and 6,404,897) are trademarks, of Harman International Industries, Incorporated. Part No.
