CC1 Ins 9/11/98 3:42 PM Page 10 ® Model CC-1 2-Way Center-Channel Speaker Owner’s Manual
CC1 Ins 9/11/98 3:42 PM Page 1 INTRODUCTION FOR CENTER CHANNEL OR SURROUND SOUND... The Infinity CC-1 center-channel speaker is a compact 2-way loudspeaker designed for center-channel use, yet it can also function as a rear- channel speaker. When used as part of an audio/video home entertainment system, the CC-1 center-channel speaker will provide you with a panorama of sound and depth to accurately recreate the cinema experience in your home. FLEXIBLE PLACEMENT...
CC1 Ins 9/11/98 3:42 PM Page 2 PLANNING YOUR SYSTEM To help plan your home theater system, below is a layout representing a typical living room where the home theater system is the main focus (see Figure 1). CENTER CHANNEL USE... For best results, the CC-1 center-channel speaker should be placed horizontally on top of the television. Or, if space is at a premium, an alternate location is below the television on a shelf. Make sure the CC-1 faces the viewing audience. REAR CHANNEL USE...
CC1 Ins 9/11/98 3:42 PM Page 3 PLACEMENT CENTER PLACEMENT... REAR PLACEMENT... The CC-1 center-channel speaker is designed for easy horizontal placement on top of (or on a shelf below) a television. It comes with built-in feet to protect furniture. Simply position the speaker so the front (grille) is even with the TV screen. For surround left and right channels, place a CC-1 speaker on the left and another on the right, horizontally on bookshelves or stands, above and behind the listening area.
CC1 Ins 9/11/98 3:42 PM Page 4 WIRING THE SYSTEM TURN OFF ALL POWER... IMPORTANT! After placing the speaker, you are ready to connect it to your system. First turn off all audio system power. Use high-quality speaker wire to make the connections. Consult the owner’s manuals (included with your amplifier, receiver, or television) for connection and operation procedures.
CC1 Ins 9/11/98 3:42 PM Page 5 Figure 4. This wiring diagram shows polarity connections for a center channel connection (also see the owner’s manual that came with your amplifier, receiver, or television). CC-1 (rear view) Receiver or Amplifier blk – + red (rear view) + – (one channel shown) TESTING THE SPEAKER After placing and wiring the speakers, turn on audio system power. Follow the instructions (packed with your A/V preamplifier or receiver) to calibrate the Dolby® Pro Logic channels.
CC1 Ins 9/11/98 3:42 PM Page 6 CARE OF YOUR SPEAKER SYSTEM The CC-1 cabinet does not require any routine care. When needed, use a soft cloth, dampened with water only, to remove any fingerprints or to wipe off dust. DO NOT USE ANY CLEANING PRODUCTS OR POLISHES. Clean the grille by gentle vacuuming.
CC1 Ins 9/11/98 3:42 PM Page 7 SPECIFICATIONS PERFORMANCE DATA DRIVE UNITS DIMENSIONS Frequency Range: 100 ~ 20,000 Hz Sensitivity: 90 dB @ 2.83 V and 1 m (anechoic conditions) Impedance: 8Ω Maximum Peak Output: 109 dB (spl on program) Amplifier Requirements: Recommended for use with amplifiers 10 ~ 80W (@ 8 Ω) Low/Mid Frequency: 2 x 4" (100 mm) polypropylene cone, magnetically-shielded High Frequency: 1 ⁄2" (12 Crossover Frequency: 3,000 Hz Width: 12 1 ⁄ 2" (318.
CC1 Ins 9/11/98 3:42 PM Page 8 LIMITED FIVE YEAR WARRANTY Who is protected by the warranty? Your Infinity warranty protects the original retail purchaser and all subsequent owners for a period of five (5) years (parts and labor) for all speaker components from any failure as a result of an original manufacturing defect so long as: (1) your Infinity loudspeakers were purchased within the fifty states of the U.S.A.
CC1 Ins 9/11/98 3:42 PM Page 9 ® Infinity Systems, Inc. 20630 Nordhoff Street Chatsworth, CA 91311, USA (818) 407-0228 • FAX (818) 709-9486 P/N .