Table of Contents Table of Contents ----------------------------------------------------------------- 1 Product Description -------------------------------------------------------------- 2 Installation ------------------------------------------------------------------------- 3 Wiring Configuration ------------------------------------------------------------ 3 General Function of Buttons ---------------------------------------------------- 4 Sign up Display & Home Menu --------------------------------------
Product Description This Infinity PRV350 incorporates a 3.5" TFT color screen, ready to complement your day whether you are on the water, motorcycle, UTV trail, or farm. Following the same footprint as the popular INFPRV250, this stereo is synonymous with excellence. In fact, the INFPRV350 was listed as one of the top new products of 2015 by Boating Industry magazine.
Installation A mounting gasket has been added inside the package for convenience. Trace along the outside edge of the gasket thus revealing your cutout. Mounting Illustration 1. Avoid installing stereo below cup holders! Make sure mounting substrate is flat to avoid flexing of the plastic. 3. To avoid possible water 2. Use the back bracket and ingress into wire harness studs to affix the unit.
General Function of Buttons 1. POWER, MUTE, PAUSE button - With unit off, press to power the unit on. - With the unit on, press and hold for over 2s to power the unit off. - In Radio, SiriusXM, AUX mode, press to MUTE sound output, press again to resume sound output. - In USB, BT Music mode, press to PAUSE playback, press again to resume playback. 2. MENU, ENTER button - In any status, press and hold for 2s to navigate to home display.
Sign Up Display & Home Menu 1. Sign Up Display Once the unit powered on, the introductory home screen appears for 4 seconds, then switches to the last played mode before power off occurred. lnflniW. ~ ~ bv HARMAN Push 2. Home Menu (Source display) At Home Menu, press the TUNE Up/Down button to move to desired source and press ENTER button to confirm. USB SiriusXM BT Music AUXIN Settings Note: icon background changes to two toned burnt orange when selected.
General Op erations 1. VOLUME Control In any mode, press VOL UP/DN button to adjust volume level. Press and hold VOL button to adjust vo lume level rapidly. VOLUME ~· ===~e~~~ 2. MUTE Control In Radio, SiriusXM, or AUX mode, press MUTE button to mute sound output; press again to resume sound output. 3. General Settings Press and hold MENU button to go back to Home Menu, then press TUNE UP/DN button to move highlight to Settings source. Then press ENTER button to go into the Settings mode. 3-1.
General Settings 3-2. Treble Control In Settings screen, press TUNE Up or Down button to select Treb le, then press VOL Up or Down button to adjust Treble level. 3-3. Balance Control ln Settings screen, press TUNE Up or Down button to select Balance, then press VOL Up or Down button to adjust Balance level. 3-4. Fader Control In Settings screen, press TUNE Up or Down button to select Fader, then press VOL Up or Down button to adjust Fader level. 3-5.
General Settings 3-7. Subwoofer Control In Settings screen, press TUNE Up or Down button to select Subwoofer, then press VOL Up or Down button to select ON or OFF. 3-8. Brightness Adj ustment In Settings screen, press TUNE Up or Down button to select Brightness, then press VOL Up or Down button to adjust Brightness level. IiiBass Subwoofer fiiTreble . Balance /'... Brightness 3-9.
Radio Section Operation 1. To Select Radio mode At Home Menu, press TUNE Upi Down button to move the highlight to Radio source, then press ENTER button to go into the Radio mode. Note: highl ight movement indicated by the icon background change to two tone orange. 2. Radio Screen Description Displays EUR or USA to indicate the Area selected in the Settings. I Only shows when the station is a Stereo Channel. ( Displays FM, AM 'if }+FM Only displays in Manual Tune status.
Radio S ection Operation 3. AREA Selection At Home Menu, move highlight to Settings, press ENTER button, then press TUNE Down button to move high1ight to AREA feature, press VOL Up or Down button to select between USAandEUR. 4. BAND Selection In Radio playing mode, press MENU button to activate navigation , then press TUNE Down button to move highlight to BAND. Now press MENU button to toggle and select between FM or AM band. 5.
SiriusXM Section Operation 1. What is SiriusXM Listen to Everything, Eve1ywhere. SiriusXM bas 175+ Channels available with SiriusXM All Access package. A SiriusXM Vehicle Tuner (sold separately), satellite antenna, and Subscription are required. For more infonnation, visit www.siriusxm.com. To listen to SiriusXM Satellite Radio, first activate the SiriusXM Vehicle Tuner using one of the two methods below: -Online: Go to www.siriusxm.
SiriusXM Section Operation 3. SiriusXM Screen Description Only displays when EQ I LOUD ON was selected in the Settings. ((>) • [Channel No.] 3 02 [ Channel Name Th e Strobe )f--------'t Only displays when the P4 +--- Iisten station is a preset station. Da nce/ El ectro n ic §-;---------~ SAVE: To save current channel into P.List. JUMP: To directly input a channel No. C. List: To display the Category List. P.LIST: To display the Preset List. 4.
SiriusXM S ection Operation 8. Direct C hannel Input (JUMP) (Cisxm>>) In SiriusXM mode, ftrst press MENU button to Enter Channel Number activate navigation, then press TUNE Down button to move nighlight to JUMP, and press ENTER button. It will display the key board. Press VOL Up or Down button to select the desired digit, then press ENTER after each selection to move to next input. After three digit input, simply press ENTER button again to jump to the selected Channel.
SiriusXM Section Operation 13. Channel Parental Lock lf you want to lock any private Channel, go back to Home Menu and select Settings. Press TUNE button to choose SXM Code. SXM Code - To Lock I Unlock all channels Press VOL UP!DN button to move highlight to ALL, then press ENTER, it will prompt for pass code, input four digit with VOL button and after each input press ENTER button to jump to next input. After four digit input, press ENTER button to or unlock all channels.
Bluetooth Section Operation 1. To Select Bluetooth mode At Home Menu, press TUNE button to move the highlight to Bluetooth source, then simply press ENTER button to go into the Bluetooth mode. Note: highlight movement indicated by the icon background change. 2. Bluetooth Sceen Description OnJy displays when EQ I LOUD ON was selected in the Settings. 103 tag: Song name Artist Album .j Tr y .. : rh e :, Try . ........ to R e me mb er lf already has BT device connected, here ,ffisplay DISCON.
Bluetooth Section Operation 4. Play/Pa use Play Once the BT device being paired is successful, music will begin to play. Note: For some Bluetooth enabled phones, you might act ivate play from your phone first. It depends on the phone itself. While BT Music playing, press the PAUSE button to pause the playback, and press it again to resume playback. Note: I refers to PLAY; ~ refers to PAUSE. 5. Track UpfOown While BT Music is playing, press T UNE Up or Down button to select the next or previous track.
USB Section Operation 1. To Select USB mode At Home Menu, press TUNE button to move the highlight to USB source, then press ENTER button to go into the USB mode. Note: This input is dsigned to read and play USB drives (mp3 and warn files), not media/ phones. You can charge most phones through the USB input. Music, however, needs to be played back by using eigher BT or Aux input. 2. USB Screen Description [Track No.
USB S ection Operation 4. Tr ack Up/Down While USB playing, simply press TUNE Up or Down button to select the next or previous track. To fast forward or rewind, press and hold TUNE button. 5. Scan Play While USB playing, simply press MENU button to activate navigation, it will highlight at SCAN, now repeat press MENU button to toggle select Track Scan, Directory Scan, or SCAN OFF. (Note: The play mode icon would change simul taneously.) S CN D.
A UX Section Operation 1. To Select USB mode At Home Menu, press TUNE Up or Down to move the highlight to AUX source, then press ENTER button to go into the AUX mode. Note: highlight movement indicated by the icon background change. The use of auxiliary mode allows you to play the portable music device through the headphone jack. Note: An additional accessory/adaptor must be purchased in order for this to happen. Prospec's part, SEAMINI2 or SEAUSBMINI36 fulfills this option. .........
Troubleshooting *Note: In many respects, a stereo acts much like a computer and occasionally requires a reboot. In the unlikely event of product malfunction, a reset can usually fix the issue. For software reset operation, please refer to page 8. Issue Cause Solution No power 1. Incorrect wiring 2. Fuse is blown 3. Low battery voltage 1. Double check wiring 2. Replace fuse 3. Check voltage of vehicle battery with multimeter. Voltage must be at least 11 V. No Sound 1. Speaker connection came loose 2.