Owner's Manual

INF-BC4 OPERATION
....... -----------/---------\---\----------------@
1. POWER ON/OFF button, VOL knob
- Press the knob to power the controller on or
off
- Tum right and left to adjust volume level.
(Remark: A beep tone indicates volume has reached maximum or minimum level.)
To establish Bluetooth connection
-Once the controller has been powered on, it will blink red and blue until a
Bluetooth connection has been made.
- Go to your digital media to
tum Bluetooth on and then search for the INFBC4
address. Once paired, the controller will
tum to a constant blue.
2. Track DN button
- Press it to select the previous track.
3. Track UP button
- Press it to select the next track.
4. Play/Pause button
- Simply press it to pause the playback.
-Simply press it again to resume playback.
To Disconnect Bluetooth device
-Press and hold the PAUSE button for 3 seconds to disconnect from Bluetooth.
The controller will flash red and blue when disconnected.
-After Bluetooth has been disconnected, press PAUSE button to reconnect the
last paired device.
Cables configuration:
1. Red: + 12V power supply with 2A fuse.
2. Black: GND.
3. Blue: REM OUT with constant 12V power supply.
4. White/Blue: REM IN for external remote control. With external remote control
connected to REM IN, the BT Controller can also be powered on/off by that
external remote control.)
5. Black: RCA Output.