FUZE 200 PORTABLE BLUETOOTH SPEAKER User Manual Warning! Warranty Card
WELCOME TO HARMAN's FAMILY OF LEGENDARY BRANDS
1 What’s in the box QSG 2 Buttons 3 Connections Input: 5V/1A
Power on / Power off 1. Turn on the bluetooth speaker 2.0s 2. Turn off the bluetooth speaker 2.0s 5 EQ switching This speaker comes with dual EQ to enter into various personal preference, to swtich EQ, short press "+" and "－" buttons to switch.
6 Bluetooth connection 1. The speaker will automatically enter into pairing mode when power on and wait for the device to connect. 2. Connect to bluetooth device < Settings Bluetooth Bluetooth DEVICES Infinity FUZE 200 Connected Now Discoverable Choose ”Infinity FUZE 200” to connect 3. When turn on, the speaker will automatically connect to the last connected device if available. If not, short press the " " button to re-enter the pairing. 4.
8 Phone call x1 9 x1 3.0s Voice assistant Bluetooth mode, double press the " " button on the speaker to activate Siri or Google Now on your phone. Please make sure the Siri or Google Now is enabled on your phone.
10 True wireless stereo pairing 1. Long press the " " button to enter into the true wireless stereo pairing mode as a master speaker. If one of them fails, clean up the pairing information. 3.0s Speaker A Speaker B 2. Enable bluetooth on your device and connect to "Infinity FUZE 200", stereo sound will play from both speakers.
11 LED Behavior Dual speaker connect On White Flash Stand by White Slow flash A Bluetooth pairing mode White Fast flash Bluetooth connected White On 12 true wireless stereo pairing mode true wireless stereo connected White Fast flash A B White Fast flash White On Specifications Bluetooth version: 4.2 Support: A2DP V1.2; GAVDP V1.3; AVRCP V1.6; HFP V1.7 Transducer: 2 x 45mm Output power: 7.5W *2 Frequency response:75Hz - 20KHz Signal-to-noise ratio: >70dB Battery type: Lithium-ion polymer (3.
13 Warning FUZE 200 is IPX7 waterproof. IMPORTANT: To ensure that the FUZE 200 is waterproof, please remove all cable connections and tightly close the cap; exposing the FUZE 200 to liquids without doing so may result in permanent damage to the speaker. And do not expose FUZE 200 to water while charging, as doing so may result in permanent damage to the speaker or power source,IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30 minutes.
