Systems Inc. Speaker System User Manual

ManualsBrandsInfinity ManualsSpeaker SystemInfinity Systems Inc. Speaker System T

instructions

BassLink

™

Thank you

for choosing the Infinity BassLink

™

T. BassLink T has been designed

to provide the kind of high-performance low-frequency reproduction that used to require

big, clumsy enclosures, large amplifiers and complicated installation. To ensure maximum

performance, we strongly recommend that installation be entrusted to a qualified professional.

Although these instructions explain how to install the BassLink T in a general sense, they

do not show the specific installation methods for your particular vehicle. If you feel you do

not have the necessary tools or experience, do not attempt the installation yourself; rather,

ask your authorized Infinity car audio dealer about professional installation options.

Remember to keep this manual and your sales receipt in a safe place for future reference.

BassLink T OM 10/13/04 2:21 PM Page 1

Summary of content (8 pages)

PAGE 1
BassLink T OM 10/13/04 2:21 PM Page 1 ™ BassLink T Thank you for choosing the Infinity BassLink T. BassLink T has been designed ™ to provide the kind of high-performance low-frequency reproduction that used to require big, clumsy enclosures, large amplifiers and complicated installation. To ensure maximum performance, we strongly recommend that installation be entrusted to a qualified professional.
PAGE 2
BassLink T OM 10/13/04 2:21 PM Page 2 INTRODUCTION CHOOSING A MOUNTING LOCATION HEARING WARNING! Playing loud music in a vehicle can permanently damage your hearing, as well as hinder your ability to hear traffic. We recommend using low volume levels while driving. Infinity accepts no liability for hearing loss, bodily injury or property damage resulting from the use or misuse of this product. Choose a mounting location that does not interfere with the seats, seat mechanisms or cargo.
PAGE 3
BassLink T OM 10/13/04 2:21 PM Page 3 MOUNTING BASSLINK T (CONTINUED) POWER CONNECTIONS ROUTING THE WIRES All signal and power wires should be routed through the opening provided at the rear of the connection panel. On the rear of Basslink T are two channels extending from the opening — one horizontal, and one vertical — that may be used for routing those wires to the vehicle. Connect power to BassLink T, as shown in Figure 7.
PAGE 4
BassLink T OM 10/13/04 2:21 PM Page 4 APPLICATIONS BassLink T is equipped with two line-level (RCA) inputs and two speaker-level inputs. To help you plan your installation, we have included two system applications in Figures 8 and 9 on pages 4 and 5. For more system ideas, see your authorized Infinity car audio dealer. Figure 8. BassLink T audio connections for a head unit with two line-level or subwoofer (RCA) outputs.
PAGE 5
BassLink T OM 10/13/04 2:21 PM Page 5 APPLICATIONS (CONTINUED) Figure 9. BassLink T audio connections for a head unit equipped with two speaker-level outputs.
PAGE 6
BassLink T OM 10/13/04 2:21 PM Page 6 CONNECTING THE REMOTE LEVEL CONTROL TO BASSLINK T INSTALLATION The Remote Level Control may be mounted under the dash or may be dismantled and mounted in the dash for a factory appearance. UNDER-DASH MOUNTING Select a mounting location that allows easy access to the control while driving. Using the Remote Level Control as a template, mark and drill holes in the mounting surface. Attach the Remote Level Control using the mounting screws provided (Figure 10).
PAGE 7
BassLink T OM 10/13/04 2:21 PM Page 7 CONTROLS AND FUNCTIONS TUNING BASSLINK T NOTE: Depending on BassLink T’s orientation and location in a vehicle, reversing the phase may (or may not) increase or decrease the amount of perceived upper bass being reproduced. BassLink T provides several controls and indicators that simplify sonic integration with virtually any vehicle’s unique acoustic properties. They are located on the top control panel, as shown in Figure 13.
PAGE 8
BassLink T OM 10/13/04 2:21 PM Page 8 SPECIFICATIONS TROUBLESHOOTING • PROBLEM: No output from BassLink T when head-unit fader control is set to front or rear. • PROBLEM: POWER LED is not lit. CAUSES and SOLUTIONS: 1. Fuse is blown and needs replacement. 2. Head unit is not functioning properly. Check remote voltage, and power, ground or remote connections. CAUSE and SOLUTION: Input connections are improperly wired. Verify all connections (see Applications, starting on page 4).