Owner's Manual
Table Of Contents
- Operation Manual
- Bluetooth PIN (1234)
- Table of Contents
- Product Description
- Mounting the Black Box
- Wiring Configuration
- General Functions of Buttons
- Sign Up Display & Home Menu
- General Operations
- General Settings
- Radio Operation
- SiriusXM Operation
- Bluetooth Operation
- USB Operation
- iPod / iPhone Operation
- AUX Operation
- Troubleshooting
- Operation of Remote Touch Pad
Wiring Configuration
ANTJAC
REAR
LINE
OUT
NOTE:
AUX1
AUX2
(AUTO
AN
(ACC
(GROUN
(FRONTLE
(REARLE
1-
i-
BLUE
RED
6PREMOTE
6PREMOTE
CONTROL
BLACK
WHITE
WHITE/BLACK
GREEN
GREEN/BLACK
GRAY
GRAY/BLACK
(FRONT
RIGHT)
VIOLET
VIOLET/BLACK
(
REAR
RIGHT
)
1.
When wiring, the red lead is recommended to be wired to ACC/ignition power lead.
2. Make sure that the black wire on the wiring harness is connected to a good ground point
on the boat.
If
the chassis
of
the boat is used as a ground point, make sure that the surface
is scraped clean
of
paint before attaching the wire to it.
It
is recommended to connect the
black ground wire directly to negative terminal (-)
of
the boat battery.
3.
Before wiring your system, disconnect your boat battery's positive(+) cable. This helps
prevent damage in case
of
a short.
4