INFPRV315 Owner's Manual INF PRV315
Table of Contents Table of Contents ----------------------------------------------------------------- 1 Product Description -------------------------------------------------------------- 2 Installation ------------------------------------------------------------------------- 3 Wiring Configuration ------------------------------------------------------------ 3 General Function of Buttons ---------------------------------------------------- 4 Generation Operations --------------------------------------------
Product Description This Infinity PRV315 incorporates a 3.5" TFT color screen, ready to complement your day whether you are on the water, motorcycle, UTV trail, or farm. Following the same footprint as the popular INFPRV250, this stereo is synonymous with excellence. The INFPRV315 incorporates the following features: \. AM/FM/WB 0 Bluetooth Audio Streaming with ID tagging f ,_. ~ "IJ 2 USB input and control-for USB drives only Auxiliary input 3.
Installation A mounting gasket has been added inside the package for convenience. Trace along the outside edge of the gasket thus revealing your cutout. Mounting Illustration 1. Avoid installing stereo below cupholders! Make sure mounting substrate is flat to avoid flexing of the plastic. 3. To avoid possible water 2. Use the back bracket and ingress into wire harness studs to affix the unit.
General Function of Buttons (\()Infinity i CD-----------------r ·· --- -- ---\--M~E l I @· · · · · · ·t.-·- · ····-~ . ------- ------ DBiuetOoiif _____ ®---------········ · ·--- ... ···:t,;:~~. . -_.,,.,~~~·--::'c"o":":~=~~-7.:.-~;.:,-,-~-~:-;;·· ·.:o.~-~: ,:=:.::.:~.: @------------------ ------- -- ----r~---r -SOURCE -- ~ ®························· ......\\.... =~: : : .:. : : .:-:: ::::..:~-.-"'~ l-- -J o/>~ r--7 E-- 1! ':, ...... , ..........S. ::t== ( \ : .:· : : : :· ,._-·_-cc.c::.
General Operations 1. POWER I MUTE button With the unit powered off, press the button to tum the unit on. With the unit on, press it to MUTE sound output, press again to resume sound output, and press and hold it for over 2s to power the unit off. Once the unit is powered on, the introductory home screen appears for 4 seconds, then switches to the last played mode before power off occurred . .11 Infinity. bv HARMAN MUTE icon display Introductory home screen 2.
General Operations 3. SOURCE button Repeat press to change source in following sequence: FM -->AM--> WB -->USB--> BT MUSIC--> AUX --> FM. (Note: Without USB or BT device connected, the corresponding source will not display whi le pushing Source button.) 4. SETTING button In any status, press it to display settings. T hen press TUNE UP/ON button to select the sub-features that desired to adjust, then tum VOL knob to adjust it. 4-l.
General Settings 4-5. Loud Control In Settings screen, press TUNE UP/ DN button to select Loud, then turn VOL knob to select ON or OFF. 4-6. EQ Selection Ln Settjngs screen, press TUNE UP/DN button to select EQ, then turn VOL knob to select Off, Class ics, Jazz, Pop or Rock. LOUD EQ Q Q Q n Bass Trellle Balance Fader ...JBass Q Treble 0 SUIMoofer 4-7. Subwoofer Gain Control At Setting screen, press TUNE UP/DN button to select Subwoofer, then tum VOL knob to adjust the Sub. Gain level. 4-8.
General Settings 4-10. Area Selection In Settings screen, press TUNE UP/ON button to select AREA, then h1m VOL knob to select USA or EUR. 4-11. Software Version View, Software Reset At Setting screen, press TUNE UP/DN button to select S/W Version, then press SEL knob to view the Software Version. Software Reset: In Software Version display status, press TUNE UP, TUNE DN, and TUNE UP in sequence, then press and hold TUNE DN for IOs to reset the unit.
Radio Section Operation 1. To Select Radio mode There are two ways to select Radio mode. - By repeat press SOURCE button. - By press TUNE UP/DN button at Main Source screen and press SEL knob when Raclio leon selected. (Note: highlight movement indicated by the icon background change to two tone orange.) 2. Radio Screen Description Displays EVR or USA to indicate the Area selected in the Settings. I Only shows when the station is a Stereo Channel. Only displays in Manual Tune status.
Radio Section Operation 6. Station Save In Radio play mode, manually or auto tune to a station, then press SEL knob to activate bottom navigation at SAVE icon and press SEL again. It will display the Save Global Preset List screen, press TUNE UP/DN button to select a preset No. and press SEL to save the station into the selected Preset No. in the List. The Preset number wi ll display once the station is saved. The unit will go back to previous display if no operation in 5s. 7.
Bluetooth Section Operation 1. To Select Bluetooth mode There are two ways to select Bluctooth mode. - By repeat press SOURCE button. -By press TUNE UP/DN button at Main Source screen and press SEL knob when Bluctooth leon selected. (Note: highlight movement indicated by the icon background change to two tone orange.) 2. Bluetooth Screen Description Only displays when EQ I LOUD ON was selected in the Settings.
Bluetooth Section Operation 5. Track Up/Down While BT Music is playing, press TUNE Up or Down button to select the next or previous track. 6. Disconnect In BT Music playing mode, in order to disconnect the BT device - Press and hold LINK button for more than 2 seconds. -Or press SEL knob to activate bottom navigation, it will highlight at DISCONN, press SEL again to disconnect the BT connection. Note: When your BT device battery is at low charge, the Bluetooth connection may occasionally be lost.
USB Section Operation 1. To Select USB mode There arc two ways to select USB mode. - By repeat press SOURCE button. - By press TUNE UP/DN button at Main Source 5Crcen and press SEL knob when USB Icon selected. (Note. highlight movement indi<.:att:d by the i<.:on background change to two tone orange.). Note: This input is designed to read and play USB drives (mp3 and wma files), not media/phones. You can charge most phones through the USB input.
USB Section Operation 5. Scan Play While USB is playing, press SEL knob to activate navigation, it will hi ghlight at SCAN, now repeat press SEL to toggle select Track Scan, Directory Scan, or SCAN OFF. (Note: Scan, Directory Scan, and Normal all appear to the right of the time track countdown.) SCN Refers to play the first lOs of all the tracks in the USB device. D. S C N Refers to play the first l Os of al l the tracks in current Directory. C Refers to play all the tracks in normal sequence. 6.
A UX Section Operation 1. To Select USB mode There are two ways to select AUX mode. - By repeat press SOURCE button. - By press TUNE UP/DN button at Main Source screen and press SEL knob when AUX leon selected. (Note: highlight movement indicated by the icon background change to two tone orange). The use of auxiliary mode allows you to play the portable music device through the headphone jack. Note: An additional accessory/adaptor must be purchased in order for this to happen.
Troubleshooting *Note: In many respects, a stereo acts much like a computer and occasionally requires a reboot. In the unlikely event of product malfunction, a reset can usually fix the issue. For software reset operation, please refer to page 8. Issue Cause Solution No power 1. Incorrect wiring 2. Fuse is blown 3. Low battery voltage 1. Double check wiring 2. Replace fuse 3. Check voltage of vehicle battery with multimeter. Voltage must be at least 11 V. No Sound 1. Speaker connection came loose 2.
Installation Instructions NO. [I / - 1- Tl \\ 'III'M''I~ )~-------t-~-----13 ~ ~ m I \ r=n ~ ~ ~ ! ! I IT= 5 =D \ PART DESCRIPTION 1 RADIO 2 MOUNTING PLATE 3 MOUNTING STUDS 4 JAMB NUTS 5 MOUNTING BRACKET 6 SPRING WASHER 7 OUTER NUTS Instructions: 1. Install jamb nuts (4) loosely on mounting studs (3 ), so they will not touch mounting brackets (5) when installed. 2. Slip mounting bracket (5) on and make flush with mounting surface (2). DO NOT RIGHTEN 3.
