Owner's Manual

Wire Configuration
6P
REMOTE
(FRONT
LINE
OUT)
CONTROL
(SiriusXM)
(ANT
JACK)
(REAR
LINE OUT)
(CAN
BUS)
(AUX)
(USB)
(REM)
(ACC)
(GROUND)
(SUBWOOFER)
WHITE
GRAY
(
FRONT
LEFT )
WHITE/BLACK
GRAY/BLACK
(FRONT
RIGHT)
GREEN
VIOLET
(REAR LEFT)
GREEN/BLACK
VIOLET/BLACK
(
REAR
RIGHT)
NOTE:
1.
When wiring, the red lead is recommended to be wired to ACC/ignition power lead.
2.
Make sure that the black wire on the wiring harness
is
connected to a good ground point
on the boat.
If
the chassis f the boat
is
used as a ground point, make sure that the surface
is
scraped clean
of
paint before attaching the wire to it.
It
is
recommended to connect the
black ground wire directly to negative terminal (-)
of
the boat battery.
3.
Before wiring your system, disconnect your boat battery's positive(+) cable. This helps
prevent damage in case
of
a short.
4