Owner's Manual
~Infinity,
INFINITY KAPPA five
-
HARMAN
THANK YOU FOR YOUR PURCHASE
...
Your product has been designed
to
provide you the performance and ease of operation you expect from Infinity. Take
time
to
read this manual before operating or installing your amplifier. Keep it
in
your glove compartment along with the
owner's manual for your
car.
Put your amplifier sales receipt with other important documents
in
order to expedite warranty
service if needed. This manual describes general installation guidelines and operation instructions. Please note that proper
installation of mobile audio components requires qualified experience with mechanical and electrical procedures.
If
you
do not have the knowledge and tools
to
perform this installation, we strongly recommend consulting an authorized Infinity
dealer about your installation options.
What's
in
the box
1 x amplifier
6x speaker-level input adapter
4x mounting screws
3x spare fuses
INSTALLATION AND WIRING
1 x E.A.
R.
L ground terminal
3x self-tapping screws
1 x remote bass controller and cable
1 x power terminal block
1 x owner's manual
IMPORTANT: Disconnect the vehicle's negative (-) battery terminal before beginning the installation.
• Wear protective eyewear when using tools.
• Choose a safe mounting location, away from moisture. Check clearances on both sides of the location. Be sure
that screws will not puncture brake
or
fuel lines or wiring harnesses, and that wire routing will not interfere with vehicle
operation. Use caution when drilling or cutting.
• When making electrical connections, make sure they are secure and properly insulated.
•
To
keep the amplifier cool, choose a location that provides enough air circulation, such as under a seat or
in
the trunk.
• Do not mount the amplifier with the heat sink facing downward, as this interferes with cooling.
• Mount the amplifier so that
it
will not be damaged by the feet of passengers or shifting cargo
in
the trunk, and so that
it remains dry.
~~~
• Using the amplifier as a template, mark the locations of the holes on the mounting surface.
•
Drill
pilot holes
in
the mounting surface.
• Attach the amplifier
to
the mounting surface with the included screws.
NOTE:
You
may find it more convenient
to
make
all
of the connections
to
the amplifier before you permanently mount
it.
K A P P A