~ lnflnit'f.
iW ~lnfin . HARMAN INFINIT Y KAPPA one 6 THANK YOU FOR YOUR PURCHASE ... Your product has been designed to provide you the performance and ease of operation you expect from Infinity. Take time to read this manual before operating or installing your amplifier. Keep it in your glove compartment along with the owner's manual for your car. Put your amplifier sales receipt with other important documents in order to expedite warranty service if needed.
0 Speaker Output Connectors • Remote: The REM lead detects signal and instructs the amplifier to turn on/off. Connect a 20-gauge wire from the "Remote Out" lead of the source unit to the REM input between the + 12V and GND inputs. Connect the speakers to these terminals, observing proper polarity (connect each speaker's positive(+) lead to the appropriate positive(+) terminal, and negative(-) lead to the appropriate negative(-) terminal.
0 Note: If you have connected your amplifier to factory Remote bass level control To control the bass output from a convenient location in the vehicle, plug the included controller into the Remote Level Control input. Mount the controller in a convenient location that doesn't interfere with normal vehicle operation. speaker outputs and the audio fails to play, change the switch to "HI2" .
4e & ~ Power/Protect indicators The power light will illuminate when the amplifier is getting power and playing. The protect indicator will illuminate in the event of conditions such as over/under voltage, short circuit, amplifier output circuit failure, or excessive heat.
TR04953_A
