(\::) lnflnit'y.' by HARMAN INFINITY KAPPA one k Infinity Kappa one k - Owner's Manual IB Infinity Kappa one k - Mode D'emploi ID Infinity Kappa one k - Manual de Propietario IDI Infinity Kappa one k - Manual do Proprietario II Infinity Kappa one k - At~ At ~ ~A1 El Infinity Kappa one k- JJJp.JIJH Infinity Kappa one k -lfii.
~ lnflni!:;.}( .. HARMAN INFINITY KAPPA one k THANK YOU FOR YOUR PURCHASE ... Your product has been designed to provide you the performance and ease of operation you expect from Infinity. Take time to read this manual before operating or installing your amplifier. Keep it in your glove compartment along with the owner's manual for your car. Put your amplifier sales receipt with other important documents in order to expedite warranty service if needed.
0 Speaker Output Connectors • Connect the speakers to these terminals, observing proper polarity (connect each speaker's positive(+) lead to the appropriate positive(+) terminal, and negative(-) lead to the appropriate negative(-) terminal. +12 volt Remote Ground To power two subwoofers, connect one sub's positive (+)and negative(-) leads to the positive and negative terminals on the left, and the other sub's positive and negative leads to the positive and negative terminals on the right.
0 Remote bass level control To control the bass output from a convenient location in the vehicle, plug the included controller into the Remote Level Control input. Mount the controller in a convenient location that doesn't interfere with normal vehicle operation. [j---10 ~~~~------e Line-level inputs (RCA) If your source unit offers preamp outputs, connect to the front and rear Land R, and subwoofer inputs using RCA patch cables. @. ---Ill @ --==ooo.-..
4e & ~ Power/Protect indicators Q POWER Q PROTECT TROUBLESHOOTING The power light will illuminate when the amplifier is getting power and playing. The protect indicator will illuminate in the event of conditions such as over/under voltage, short circuit, amplifier output circuit failure, or excessive heat. CAUSE and SOLUTION: No voltage at BATI+ and/or REM terminals, or bad or no ground connection . Check voltages at amplifier terminals with VOM .
TR04952_A
