Owner's Guide Loudspeaker OWS-1

ManualsBrandsInfinity ManualsPortable SpeakersOWS-1

Owner’s Guide

OWS-1

Summary of content (4 pages)

PAGE 1
OWS-1 Owner’s Guide
PAGE 2
Infinity OWS-1 The OWS-1 loudspeaker reinforces Infinity’s long-standing commitment to accurate sound reproduction. Our proprietary Ceramic Metal Matrix Diaphragm™ (C.M.M.D.™) drivers allow the OWS-1 to deliver uncompromising performance in any stereo or multichannel home theater application. UNPACKING THE SPEAKERS WALL-MOUNTING THE OWS-1 The OWS-1 speaker is designed to mount directly to a wall. Each OWS-1 speaker has (4) keyholes on its rear to allow either a vertical or horizontal placement.
PAGE 3
WIRING THE SYSTEM FINAL ADJUSTMENTS IMPORTANT: Make sure all equipment is turned off before making any connections. For speaker connections, use a minimum #18-gauge speaker wire with polarity coding.The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., +). Heavier gauge wire should be used when more than 50 feet of speaker wire is required.The wire channels on the rear of the OWS-1 will accommodate most types of 14- to 18-gauge wire.
PAGE 4
Declaration of Conformity We, Harman Consumer International 2, route de Tours 72500 Chateau-du-Loir France declare in own responsibility, that the product described in this owner’s manual is in compliance with technical standards: EN 50081-1:1992 EN 50082-1:1997 © 2001 Infinity Systems, Inc. 250 Crossways Park Drive, Woodbury, NY 11797 USA (800) 553-3332 (USA Only) www.infinitysystems.com Infinity is a registered trademark of Infinity Systems, Inc. Printed in USA 4/01 Luc E.