:~-J lnflni\Y HARMAN Infinity Primus 6002a/6004a/9004a/3000a Infinity Primus 6002a/6004a/9004a/3000a Owner's Manual Infinity Primus 6002a/6004a/9004a/3000a Mode D'emploi Infinity Primus 6002a/6004a/9004a/3000a Manual de Propietario Infinity Primus 6002a/6004a/9004a/3000a IDP-'M Infinity Primus 6002a/6004a/9004a/3000a IJil-'fl& Infinity Primus 6002a/6004a/9004a/3000a At*At ~~A1 Infinity Primus 6002a/6004a/9004a/3000a Panduan Pengguna AU·•
<~ Infinity' HARMAN Infinity Primus 6002a/6004a/9004a/3000a THANK YOU FOR YOUR PURCHASE ... Your Infinity product has been designed to provide you with the performance and ease of operatiOn you would expect from Infinity. • • • Please take time to read your owner's manual1n its entirety before operating or installing your amplifier. Keep the owner's manual for your amphf~er 1n your glove compartment along with the owner's manual for your car.
Precautions: +12 volt Remote Ground t_jt i IMPORTANT: Disconnect the vehicle's negative(-) battery tenninal before beginning the installation. • • • • • • • • • • />Jways wear protective eyewear when ustng tools. Choose a safe mounting location, away from moisture. Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines, or wiring harnesses and that wire routing will not interfere with the safe vehicle operation.
@~~ ~.; ~.~@ @~~ @ Primus 6004a and 9004a • The Primus 6004a and 9004a feature Channel1 +1-, Channel2 +1-, Channel3 +1-, and Channel4 +1- terminals. • 4-channel operation: Connect the front left speaker to the Channel 1 + and - terminals, and the front right speaker to the Channel 2 + and terminals. Connect the rear left speaker to the Channel 3 + and - terminals, and the rear right speaker to the Chanel 4 + and - terminals.
LEVEL CHAPTER3: OPERAnONS Setting the input levels: To match your amplifier's input sensitivity (gain) to your source unit's output level, we recommend the following procedure: A. Tum both input level controls counterclockwise to MIN (minimum). B. Play a dynamic music track through your source unit. Tum the source unit's volume control to the 3/4 position. C . Tum the front input level control dial clockwise towards MAX until you hear distortion in the music Qt's no longer clear). D.