User's Manual

ManualsBrandsInfinity ManualsSpeakersInfinity Speaker 65.5CS

kappa series

50.5cs,60.5cs,

65.5cs

instructions

Thank you for purchasing Infinity’s Kappa Series

automotive loudspeaker components. We’ve organized this manual

to make your installation as simple and trouble-free as possible.

Please read it thoroughly before proceeding. Remember to keep

your sales receipt with this manual in a safe place so both are

available for future reference.

Summary of content (4 pages)

PAGE 1
kappa series 50.5cs,60.5cs, 65.5cs instructions Thank you for purchasing Infinity’s Kappa Series automotive loudspeaker components. We’ve organized this manual to make your installation as simple and trouble-free as possible. Please read it thoroughly before proceeding. Remember to keep your sales receipt with this manual in a safe place so both are available for future reference.
PAGE 2
INSTALLATION INSTALLATION WARNINGS AND TIPS ABOUT THESE INSTRUCTIONS Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although these instructions explain how to install Kappa Series Component Systems in a general sense, they do not show the exact installation methods for your particular vehicle.
PAGE 3
INSTALLATION CONNECTIONS Figure 5A. Mounting the tweeter using the I-Mount™ flush-mounting kit. blk Figure 6. Mounting the tweeter using the I-Mount™ surface-mounting kit. blk – + red red 1 1) push in 2 2) turn – + Open the crossover housing by placing your fingers between the terminals and the top cover, and gently pulling off the cover. Using screws or a wire tie, mount the crossover through the holes provided. Observing proper polarity, connect the speakers and amplifier as shown in 7A and 7B.
PAGE 4
SPECIFICATIONS 50.5cs Type: Crossover Frequency: Woofer Speaker Impedance: Power Handling: Sensitivity: Frequency Response: Mounting Depth: Cut-Out Diameter: Tweeter Speaker Impedance: Power Handling: Sensitivity: Frequency Response: Mounting Depth: Cut-Out Diameter: 5-1⁄4" 2-Way Component 3.5kHz 4 ohms 85W RMS, 255W Peak 90dB @ 2.83V, 1m 55Hz – 21kHz 2-1/16" (53mm) 4-11/16" (120mm) 4 ohms 50W RMS, 150W Peak 90dB @ 2.83V, 1m 3.5kHz – 21kHz 1-3 ⁄16" (31mm) 1-3/4" (45mm) 60.