User's Manual

ERS IN-WALL SPEAKERS

NEW CONSTRUCTION

If you wish to preinstall a rough-in frame before the drywall

is installed, you will need to purchase the correct rough-in-frame

kit for your model:

Speaker Model Rough-In-Frame Kit

ERS 110II, ERS 110DT ERS 110RIF or IW6R RIF

ERS 210II ERS 210RIF

ERS 310 IW8R RIF

ERS HV250 IW55 RIF

Detailed installation instructions are supplied with the

rough-in kit.

Painting the Speaker Frame and Grille

ERS Series loudspeakers can be painted to match any décor.

If you wish to change their color, the satin finish on the grille

and frame will function as a primer coat. Before painting, install

the paint shield (inner section of template in the assembly kit)

securely into the recess in the baffle.This will protect the

speaker components and baffle from paint residue. Use a

high-quality spray paint, and apply a thin coat of color.

Be certain the grille perforations remain free of paint.

Filling them with paint will diminish the sound quality.

Note:

Gently remove the acoustical foam blanket from

the grille before painting. Reattach the blanket after the

paint has dried.

OPERATION

Surround Modes

hen using the system in a Dolby* Digital or DTS

home theater

system,

make sure all speakers are set to “Small.”When using

the ERS Series in a Dolby Pro Logic* home theater system,

make sure the receiver’s center channel mode is set to “Normal.”

Some Dolby Digital-equipped r

eceivers/processors offer different

setup options for each source or surround mode: e.g., CD-stereo,

videotape, Dolby or Pro Logic. In each case, follow your

equipment’s instructions to ensure that the subwoofer (if you have

one) output is turned on and that the speakers are set to “Small”

in each mode.